NiTHO - Play Hard - Video Games Accessories
User Guide for NiTHO models including: PS4 Drive Pro ONE Gaming Racing, PS4, Drive Pro ONE Gaming Racing, Pro ONE Gaming Racing, Gaming Racing, Racing
NITHO Drive Pro ONE Gaming Racing Wheel with Separate Shifter and Floor Pedals, Steering Wheel for PC, PS4, Xbox One, Xbox Series X|S, Switch, 270 Degree Zero Dead Zone Driving Car Simulator : PC & Video Games
NiTHO Drive Pro ONE Gaming Racing Wheel with Separate Shifter and Floor Pedals, Steering Wheel for PC, PS4, Xbox One, Xbox Series X|S, Switch, 270 Degree Zero Dead Zone Driving Car Simulator : Video Games
Buy NiTHO Drive Pro ONE Gaming Racing Wheel with Separate Shifter and Floor Pedals, Steering Wheel for PC, PS4, Xbox One, Xbox Series X|S, Switch, 270 Degree Zero Dead Zone Driving Car Simulator Online at Low Prices in India | Nitho Video Games - Amazon.in
File Info : application/pdf, 44 Pages, 1.80MB
DocumentDocumentQuick start guide Thank you for choosing NITHO This start guide will help you through the racing wheel's basic setup for all platforms. The setup has been developed and tested on every level of racing difficulty. From the beginners to experienced drivers, NITHO is greatly performing in all kinds of racing games as Gran Turismo, Rally, Formula 1, Formula Drift and allows you to win the podium. BE THE ! Main features - DRIVE PROTM ONE racing wheel performs in all main gaming platforms: PC, PS4®, PS3®, Xbox®One, Xbox®Series X/S and Nintendo® Switch® - PC can be setup in both D-Input and X-Input modes - Zero deadzone technology for PS4®, Xbox® (all versions) and PC D-Input - 28 buttons designed for in-race comfort and quick actions - D-pad stick allows a quicker menu selection and easy in-race control - Analog stick can be setup as view control or as a D-pad - Hardened metallic paddles increasing shifting feeling and providing higher race immersion - Solid clamps can be fastened to any desk with 5.5 cm maximum thickness - Removable and sturdy suction cups - Analog and metal plated accelerator and brake pedals - Separated sequential gear shifter ideal for rally and formula drift races Play Hard! With NITHO Index Page 1.......... Package content Page 2.......... First setup Page 3.......... Clamps installation Page 4.......... LED compatibility indicator Page 5.......... PlayStation®4 setup Page 7.......... Xbox®One setup Page 8.......... Xbox®Series X|S setup Page 10.........PC D-input setup Page 12.........PC X-input setup Page 14.........Nintendo® Switch® setup Page 16.........PlayStation®3 setup Package content (1) Racing wheel (2) Sequential gear shifter (3) Pedals set (4) Connection cable USB-A to USB Micro B (for PS4® or Xbox®One controller) (5) Connection cable USB-A to USB-C (Type C) (for Xbox®Series X/S controller) (6) Connection cable LAN to LAN (for gear shifter) (1) (2) (3) (4) (5) PS4® and Xbox®One Xbox®Series X/S (6) Page 1 First setup The following step is same for all the platforms: (1) Fasten the racing wheel to a steady desk or wheel stand (2) Connect the pedals to the wheel by the LAN port on the back side (3) Secure the gear shifter to a steady structure and use the provided detachable LAN cable to connect it to the dedicated port on the back of the wheel (1) (2) (3) Page 2 Clamps installation (1) 2x C-shape clamps (2) 2x Fastening bolts (3) 2x Removable extensions (1) (2) (3) Step 1 - Insert the bolts from the top and the clamps from the bottom, then fasten them together. Step 2 - The extensions can be removed if the wheel is mounted on a thick desk. Thick desk Slim desk Step 3 - Fasten the clamps according to the thickness of the desk. Page 3 LED compatibility indicator Different colours LED light indicates to which console the wheel is connected. Blue - Indicates the connection with PlayStation® Green - Indicates the connection with Xbox® Purple - Indicates the connection with PC (D-Input) Orange - Indicates the connection with PC (X-Input) Red - Indicates the connection with Nintendo® Switch® Page 4 PlayStation®4 setup (1) After you have setted the wheel and gear shifter as indicated in page 2, connect the original SONY® controller to the wheel with the USB-A to USB Micro B cable, provided in the packaging. (2) Connect the wheel to the console's USB port and turn the console on. (3) The wheel's LED automatically switch on blue colour, then press the PS® button on the wheel. (4) At this point, the wheel is ready. Play the game and customize your in-game setup, following the "PS4® buttons layout" as displayed in page 6. Note: In case you lose the USB-A to USB Micro B cable, you can replace it with any similar cable available in the market, paying attention that it has DATA function. Note: You must connect the original SONY® DUALSHOCK 4® controller to the wheel. Third party's controllers, not officially licensed by SONY®, are not going to work. Page 5 PS4® buttons layout L3 (Left Red) D-pad up (Left White) L2 (Left Green) L1 (Left Paddle) (Left Centre) (Right Red) R3 (Right White) D-pad down (Right Green) R2 (Right Paddle) R1 (Right Centre) (Left Outer) (Right Outer) D-pad D-pad Share Options PS Brake Accelerator Up (L1) Down (R1) Sequential gear shifter Page 6 Xbox®One setup (1) After you have setted the wheel and gear shifter as indicated in page 2, connect the original Xbox® One controller to the wheel with the USB-A to USB Micro B cable, provided in the packaging. (2) Connect the wheel to the console's USB port and turn the console on. (3) The wheel's LED automatically switch on green colour, then press the Home (4) button on the wheel. At this point, the wheel is ready. Play the game and customize your in-game setup, following the "Xbox® One buttons layout" as displayed in page 9. Note: In case you lose the USB-A to USB Micro B cable, you can replace it with any similar cable available in the market, paying attention that it has DATA function. Note: You must connect the original Xbox®One controller to the wheel. Third party's controllers, not officially licensed by Xbox®, are not going to work. Page 7 Xbox®Series X|S setup (1) After you have setted the wheel and gear shifter as indicated in page 2, connect the original Xbox®Series X|S controller to the wheel with the USB-A to USB-C Type C cable, provided in the packaging. (2) Connect the wheel to the console's USB port and turn the console on. (3) The wheel's LED automatically switch on green colour, then press the Home button on the wheel. (4) At this point, the wheel is ready. Play the game and customize your in-game setup, following the "Xbox®Series X|S buttons layout" as displayed in page 9. Note: In case you lose the USB-A to USB-C cable, you can replace it with any similar cable available in the market, paying attention that it has DATA function. Note: You must connect the original Xbox®Series X|S controller to the wheel. Third party's controllers, not officially licensed by Xbox®, are not going to work. Page 8 Xbox®One & Xbox® Series X|S No dedicated function (Left Red) buttons layout No dedicated (Right Red) function D-pad up (Left White) (Right White) D-pad down Brake (Left Green) (Right Green) Accelerator LB (Left Paddle) RB (Right Paddle) Y (Left Centre) B (Right Centre) X (Left Outer) A (Right Outer) D-pad D-pad Back Guide Start Brake Accelerator Up (LB) Down (RB) Sequential gear shifter Page 9 PC D-Input setup (1) After you have setted the wheel and gear shifter as indicated in page 2, connect the wheel to the PC's USB port. (2) The wheel's LED automatically switch on purple colour. (3) At this point, the wheel is ready. Play the game and customize your in-game setup, following the "PC D-Input buttons layout" as displayed in page 11. Note : From D-Input is possible to switch to X-Input pressing the button 13 (Home) for few seconds until the LED light changes color to orange. Page 10 PC D-Input buttons layout 11 (Left Red) 14 (Left White) 5 (Left Green) 7 (Left Paddle) 4 (Left Centre) 3 (Left Outer) D-pad 10 9 13 (Right Red) 12 (Right White) 15 (Right Green) 6 (Right Paddle) 8 (Right Centre) 2 (Right Outer) 1 18 Y Y axis Rotation 19 Brake Throttle Up (16) Down (17) Sequential gear shifter Page 11 PC X-Input setup (1) After you have setted the wheel and gear shifter as indicated in page 2, connect the wheel to the PC's USB port. (2) The wheel's LED automatically switch on orange colour. (3) At this point, the wheel is ready. Play the game and customize your in-game setup, following the "PC X-Input buttons layout" as displayed in page 13. Note : From X-Input is possible to switch to D-Input pressing the button 13 (Home) for few seconds until the LED light changes color to purple. Page 12 PC X-Input buttons layout 9 (Left Red) Y-Axis (-) (Left White) Z-Axis (-) (Left Green) 5 (Left Paddle) 4 (Left Centre) 3 (Left Outer) (Right Red) 10 (Right White) Y-Axis (+) (Right Green) Z-Axis (+) (Right Paddle) 6 (Right Centre) 2 (Right Outer) 1 D-pad Analogue stick + Button 10 10 9 13 Z-Axis (-) Z-Axis (+) Up (5) Down (6) Sequential gear shifter Page 13 Nintendo® Switch® setup (1) After you have setted the wheel and gear shifter as indicated in page 2, connect the wheel to the Switch® Dock's USB port and turn the console on. (2) The wheel's LED automatically switch on red colour, then press the Home button on the wheel. (3) At this point, the wheel is ready. Play the game and customize your in-game setup, following the "Switch® buttons layout" as displayed in page 15. Page 14 Nintendo® Switch® buttons layout L (Left Red) D-pad up (Left White) ZL (Left Green) L (Left Paddle) X (Left Centre) Y (Left Outer) (Right Red) R (Right White) D-pad down (Right Green) ZR (Right Paddle) R (Right Centre) A (Right Outer) B D-pad (-) (+) Home ZL Analogue stick + R ZR Up (L) Down (R) Sequential gear shifter Page 15 PlayStation®3 setup (1) After you have setted the wheel and gear shifter as indicated in page 2, connect the wheel to the PS3® USB port and turn the console on. (2) The wheel's LED automatically switch on blue colour, then press the Home button on the wheel. (3) At this point, the wheel is ready. Play the game and customize your in-game setup, following the "PS3® buttons layout" as displayed in page 17. Page 16 PS3® buttons layout No dedicated function (Left Red) No dedicated (Right Red) function D-pad up (Left White) (Right White) D-pad down L2 (Left Green) (Right Green) R2 L1 (Left Paddle) (Right Paddle) R1 (Left Centre) (Right Centre) (Left Outer) (Right Outer) D-pad Share Options PS Brake D-pad Accelerator Up (L1) Down (R1) Sequential gear shifter Page 17 Sequential gear shifter - Sequential gear shifter - Adjustable table mounting Gear down Gear up Brake Pedal set - Potentiometered (analog) pedals - Metal plated - Foldable footrest Accelerator Page 18 www.nitho.com SERVICE & SUPPORT For any question and support contact us on: support@nitho.com or visit www.nitho.com All other copyrights, marks and trademarks are property of their respective owners. This product is not designed, manufactured, sponsored or endorsed by Nintendo® Co., Ltd., Sony® Computer Entertainment Inc. or Microsoft® Corporation. SUPPORT@NITHO.COM WWW.NITHO.COM NITHOGAMES NITHOGAMES NITHO Gran TurismoRallyFormula 1Formula Drift BE THE ! · - DRIVE PROTM ONE PC, PS4®, PS3®, Xbox®One, Xbox®Series X/S Nintendo® Switch®b - PC D-Input X-Input - PS4®, Xbox® () and PC D-Inputb - 28 - D-pad - D-padb - - C5.5 - - - Play Hard! With NITHO 1.......... 2.......... 3.......... 4.......... LED 5.......... PlayStation®4 7.......... Xbox®One 8.......... Xbox®Series X|S 10.........PC D-input 12.........PC X-input 14.........Nintendo® Switch® 16.........PlayStation®3 (1) (2) (3) (4) USB USB-A USB Micro B PS4® Xbox®One (5) USB USB-A USB-C Xbox®Series X/S (6) (1) (2) (3) (4) (5) PS4® Xbox®One Xbox®Series X/S (6) 1 (1) (2) LAN (3) (1) (2) (3) 2 (1) 2C (2) 2 (3) 2 (1) (2) (3) 1 - 2 - 3 - 3 LED LED - PlayStation® - Xbox® - PC (D-Input) - PC (X-Input) - Nintendo® Switch® 4 PlayStation®4 (1) 2 USB (4) SONY® (2) USB (3) LED PS® (4) 6 "PS4® " USB-A USB Micro B : SONY® DUALSHOCK 4® SONY® 5 PS4® L3 (-) (-) L2 (-) L1 (-) (-) (-) R3 (-) (-) R2 (-) R1 (-) (-) (-) PS (L1) (R1) 6 Xbox®One (1) 2 USB (4) Xbox® (2) USB (3) LED (4) 9 "Xbox®One " USB-A USB Micro B : Xbox®One Xbox® 7 Xbox®Series X|S (1) 2 USB (5) Xbox®Series X|S (2) USB (3) LED (4) 9 "Xbox®Series X|S " USB-A USB-C : Xbox®Series X|S Xbox® 8 Xbox®One & Xbox® Series X|S (-) (-) (-) LB (-) (-) (-) (-) (-) RB Y (-) (-) B X (-) (-) A (LB) (RB) 9 PC D-input (1) 2 USB (2) LED (3) 11 "PC D-Input" : 13 LED D-Input X-Input 10 PC D-Input 11 (-) 14 (-) 5 (-) 7 (-) 4 (-) 3 (-) 10 9 13 (-) 12 (-) 15 (-) 6 (-) 8 (-) 2 (-) 1 18 Y Y 19 (16) (17) 11 PC X-input (1) 2 USB (2) LED (3) 13 "PC " : 13 LED X-Input D-Input 12 PC X-input 9 (-) Y-Axis (-) (-) Z-Axis (-) (-) 5 (-) 4 (-) (-) 10 (-) Y-Axis (+) (-) Z-Axis (+) (-) 6 (-) 2 3 (-) (-) 1 + 10 10 9 13 Z (-) Z (+) (5) (6) 13 ® Switch® (1) 2 Switch® USB (2) LED (3) 15 "Switch® " 14 ® Switch® L (-) (-) ZL (-) L (-) X (-) (-) R (-) (-) ZR (-) R (-) A Y (-) (-) B + R (-) (+) ZR ZL (L) (R) 15 PlayStation®3 (1) 2 PS3® USB (2) LED PS® (4) 17 "PS3® " 16 PS3® (-) (-) L2 (-) L1 (-) (-) (-) (-) (-) R2 (-) R1 (-) (-) (-) (L1) (R1) PS 17 - - - - - 18 www.nitho.com support@nitho.com www.nitho.com Nintendo®Sony®Microsoft® . SUPPORT@NITHO.COM WWW.NITHO.COM NITHOGAMES NITHOGAMES