Toguard CE41 Full HD 1080P Dash Camera
This document provides a comprehensive guide to the Toguard CE41 Dash Camera.
Important Notice
- This product is intended for use in motor vehicles only.
- DO NOT install the camera in a location that obstructs the driver's view of the road (including mirrors) or the deployment of the airbag.
- Before using this device, please insert the memory card first. You need to format the micro SD card to FAT32 on your PC, then format the memory card in the camera's menu.
- This camera records high-resolution video. Ensure you use a high-speed Micro SD card. A Micro SD card of 16 GB or 32 GB, Class 10 or higher, is recommended.
- For safety reasons, this camera has a small built-in battery, used to save the video file after the external power source is cut off (when the car turns off).
- Ensure the camera lens is clean and unobstructed.
- DO NOT leave the camera in direct sunlight for extended periods or in temperatures exceeding 170°F (75°C).
Interface and Button Functions
The Toguard CE41 features a user-friendly interface with clearly labeled buttons.
Diagram showing the front and side views of the Toguard CE41 dash camera with numbered components:
1. Rear Lens
2. Front Lens
3. MIC
4. Screen
5. Mini USB Connector
6. Mount Socket
7. Down Button
8. Menu Button
9. Up Button
10. OK Button
11. Power Button
12. Reset Button
13. Memory Card Slot
Button Functions:
| Button | Function |
|---|---|
| Power | Press and hold to turn the camera on/off. Briefly press to turn the screen on or off. |
| OK | In standby/video/photo mode: Briefly press to start/stop video recording or take a photo. In the settings menu: Briefly press to select and adjust. In playback mode: Briefly press to select and play recorded files. |
| UP | In the settings menu: Briefly press to select an option and adjust values. In playback mode: Briefly press to select multimedia files. Press and hold to change the position of multimedia files. During video recording: Briefly press to switch between the front and rear camera display. |
| MENU/MODE | Press the button to access the menu settings. Press twice to access the system settings menu. In standby: Press and hold to switch between Video/Photo/Playback modes. |
| Down | In the settings menu: Briefly press to select an option and adjust values. In playback mode: Briefly press to select multimedia files. Press and hold to change the position of multimedia files. During video recording: Briefly press to enable or disable audio recording. |
Installation and Mounting
Diagram illustrating the installation of the dash camera in a car, showing the camera mounted on the windshield and the power cable routed along the dashboard.
- Before installation, check the normal operation of the camera and ensure you are using a high-speed Micro SD card (Class 10 or higher). Format the card in the camera's menu before recording.
- Use the camera mount to install the CE41A dash cam on the windshield. The recommended location is near the rearview mirror, facing forward. Adjust the lens angle for optimal coverage.
- Adjust the camera lens angle to ensure the best coverage of the hood and the road for recording events.
- Connect the power to the camera and the cigarette lighter adapter, and hide the remaining cable in the dashboard cavity.
Operating Modes
The CE41 operates in three modes: Video Recording, Photo Mode, and Playback Mode. Each mode has a dedicated menu for configuration.
Video Recording Mode:
The camera automatically enters video recording mode and starts recording when connected to a car charger and powered on. A flashing red dot in the top-left corner indicates that recording is in progress. Press the OK button to stop recording or to start recording again.
Photo Mode:
The Toguard CE41 can take photos in HD up to 10 Megapixels. Simply turn on the camera. Press and hold MENU to select photo mode, then press OK to take a photo. Similar to video recording, you can press MENU once to access the photo mode settings or twice for system settings.
Playback Mode:
This mode allows you to play recorded videos or view photos. Stop video recording and press MENU twice to enter playback mode. Use the UP and DOWN buttons to navigate through recorded files, and press OK to view the selected video or photo.
Screen Interface Elements:
Diagram of the dash camera's screen displaying various icons and information:
1. Video Mode Icon
2. Loop Recording
3. Exposure
4. Motion Detector
5. HDR
6. G-Sensor
7. Recording Time
8. Resolution
9. Parking Monitor
10. LED Status
11. Memory Card Status
12. Power Status
13. Audio Status
14. Time and Date
In all operating modes, you can press the MENU button to access mode-specific settings or press it twice for system settings. Use UP and DOWN to navigate through configuration options and OK to select. Press MENU again to exit settings.
Video Recording Menu:
- Resolution: Adjust the front lens recording resolution to 1080P/720P/VGA.
- Loop Recording: Set the video duration to 1/2/3 minutes. This function enables continuous recording, overwriting the oldest file when storage is full.
- High Dynamic Range (HDR): Enable to optimize video quality with a wider range of light and image details.
- Exposure: Adjust the exposure value to control the video brightness.
- Motion Detection: Enable or disable motion detection. For your safety, it is recommended to keep this function off while driving.
Additional Settings (Accessed via MENU):
- Recording: Enable or disable audio recording in videos.
- Date Stamp: Enable/disable date and time stamps on video files.
- G-Sensor: Detects sudden movements or impacts and automatically locks the current recording file. Low/Medium/High sensitivity is available.
- Parking Monitor: Protects your car after parking. When activated, the camera remains in standby after the car is stopped and turned off. If a shock or collision is detected, it automatically turns on, records a short video, and then turns off.
Photo Mode Menu:
- Resolution: Configure photo resolution up to 10 megapixels.
- Anti-Shaking: Enable or disable image stabilization.
- Date Stamp: Enable/disable date and time stamps on image files.
Playback Mode Menu:
- Delete: Delete the currently displayed file or all files.
- Protection: Lock/unlock the currently displayed file or all files.
- Slideshow: Select an interval to display recorded files in a slideshow.
System Settings Menu:
Access the system settings by pressing MENU twice. The tool icon is highlighted in the top-left corner.
- Screen Saver: Configure the time for the LCD screen to automatically turn off after inactivity.
- Auto Power Off: Set the time for the camera to automatically shut down to save power. The camera will automatically turn off when in standby after the set time.
- Light Frequency: Configure the light frequency to 50Hz or 60Hz according to local regulations.
- Beep Sound: Enable/disable the beep sound when any button is pressed.
- Language: English / Chinese / French / German / Spanish / Italian available.
- Date/Time: Change the time and date using the UP and DOWN buttons. Press OK to confirm changes, then press MENU again to exit date/time settings.
- Restore Setting: Reset all settings to factory defaults.
- Format: Format the Micro SD card.
- Version: Check the firmware version.
- LED Light: Configure the LED lamp's operating mode (ON / Always OFF / Automatic). In Automatic mode, the LED lights turn on when ambient light is too low.
Specifications
| Specification | Details |
|---|---|
| Model | Toguard Ce41 |
| Image Sensor | High Resolution CMOS Sensor |
| Display | 1.5 inch LCD Screen |
| Lens | 170° High Resolution Wide Angle Lens |
| Video Resolution | Front: 1920*1080P, Rear: 1920*1080P |
| Video Format | MOV |
| Video Encoding | H.264 |
| Video Mode | Normal / Loop Recording / Motion Detection |
| Image Format | JPG |
| Photo Resolution | 10MP/8MP/5MP/3MP/2MP/1.3MP/VGA |
| Loop Recording | Supported |
| Recording Startup | Supported |
| HDR | Supported |
| G-Sensor | Supported |
| Language | English/Chinese/French/German/Spanish/Italian |
| Audio Recording | Built-in microphone, On/Off optional |
| Storage | Micro SD Card (up to 128GB) |
| USB Interface | Mini USB |
| Operating System | Windows 7/10 or MAC |
| Internal Battery | Built-in lithium battery |
| External Power Source | DC 5V / 1.5A |
| Storage Temperature | -20°C~60°C |
| Operating Temperature | -10°C~50°C |
Common Problems and Solutions
- P: When I press the menu button, why doesn't the system menu appear?
- R: First, press the OK button to stop recording.
- P: I've stopped recording, but I still can't access the menu.
- R: Please turn off motion detection. Otherwise, it will continue recording when it detects any movement, preventing you from accessing the menu.
- P: I have configured recording, but it only records randomly for 10 seconds with long intervals, then stops and restarts recording.
- R: We suggest not activating motion detection functions while driving, as this function can cause intermittent recording.
- P: The SD card is full and not overwriting?
- R: Please check if all video files are locked and cannot be overwritten. Format the micro SD card and adjust the G-Sensor sensitivity.
- P: The mount cannot be fixed properly on the windshield?
- R:
- Please clean the windshield where the mount is attached with a glass cleaning wipe. Remove the protective film. If it still doesn't work, warm the windshield and try again.
- Please soak the suction mount in hot water for a moment.
- If it still doesn't work, Toguard can send you a new suction mount. Please contact Toguard for a replacement.
- P: Even though the screen saver is configured, the screen keeps turning on.
- R: The power supply might be unstable. Please try another car charger.
- P: Why does the dash camera drain the car battery?
- R: Please check if the cigarette lighter is still functioning after turning off the car engine.
- P: The dash camera stops automatically during recording.
- R:
- Check if the memory is full.
- Check if the recording function is enabled.
- Check if the Micro SD card is high-speed, above C10.
- Review the memory card; there might be too many locked videos preventing proper recording.
- Check the car charger connection status. If the connection is loose, the power supply is unstable, and the camera will turn off automatically.
- P: The camera keeps turning on and off.
- R: This might be the parking monitor function activating. Check the settings menu.
- P: If the video played on the computer is not smooth or is stuck.
- R:
- Try playing the video with different video players, such as Potplayer or VLCplayer.
- Format your Micro SD card in the camera.
- Perform a speed test on the memory card to ensure it meets the requirement: the write speed should be above 10MB/S.
- P: There are interference stripes in the image.
- R: The light frequency might be incorrect. According to local regulations, choose the appropriate frequency settings: 50HZ or 60HZ.
- P: Without an external power source, the camera only lasts a very short time or simply cannot turn on.
- R: The built-in battery has a low capacity for safety reasons, and it is used only to save the video and the parking monitor. It is not designed to operate without an external power source.
Contact Information
If you are not having a good experience, please contact Toguard at support@Toguard.cc. Toguard will provide a quick and authorized response within 24 hours and do their best to resolve your issue as soon as possible. Enjoy greater security with Toguard.
