Orbit Hose End Watering Flowerbed and Shrub Kit

This instruction manual guides users through the setup and installation of the Orbit Hose End Watering Flowerbed and Shrub Kit. Designed for efficient garden irrigation, the kit allows for targeted watering of plants, flowerbeds, and shrubs.

Kit Contents:

• Hose Faucet Timer
• Tubing Cutter
• End Plug
• Coupling
• Tee
• Adjustable Bubblers on Spike
• Pressure Reducing Tubing Adapter
• Punch Tool
• Figure 8 End Fitting
• Tubing Stake
• 50' of ½" Tubing

Installation Overview:

1. Attach to Hose Faucet: Connect the timer and the 3-in-1 faucet adapter to the hose faucet, then insert the ½" distribution tubing.
2. Layout Tubing: Uncoil the ½" tubing, run it along plants, and secure it with tubing stakes. Use tees for branching and couplings for connecting tubing sections.
3. Flush Tubing and Attach End Fitting: Flush the tubing with water to remove debris and attach the Figure 8 End Fitting to the end of the line.
4. Attach Sprinklers: Punch holes in the tubing, insert couplings, attach ½" tubing to the couplings, and connect adjustable bubblers to the tubing, placing them near plants.

The manual also provides layout examples for different garden configurations and tips for optimal installation, such as warming the tubing in the sun.

Support and Information:

For further assistance or more information, Orbit recommends visiting their website at www.orbitonline.com or www.canada.orbitonline.com. Customers can also call Orbit at 1-800-488-6156 or visit support.orbitonline.com.

This product is intended for cold water outdoor irrigation use only and should be protected from freezing.