Hilti S-MDW61C 6.5x60 Duplex Coated Fastener Operating Instructions
Product Number: #2291282
Specifications
- Model: S-MDW61C
- Size: 6.5x60
- Coating: Duplex Coated
- Length: 19 mm
- Head Size: 8 mm [Hexagonal Head]
- Material Thickness (DC): 0.4 - 2 mm
- Minimum Substrate Depth: 30 mm
- Maximum Material Thickness (MFmax): 21 mm
- Diameter: ⌀ 6.5 mm
- Distance Indicator: 0-1km
Application Guide
-
Step 1: Tool Selection and Speed.
Select compatible tools: ST 1800, ST 1800-A, or SF (H). Ensure drill speed is between 1200-2000 rpm [revolutions per minute]. ⚠️ [Warning symbol indicating potential hazard or incorrect usage].
-
Step 2: Driving the Screw.
Use the S-NS 8 driver bit to drive the screw into the material.
-
Step 3: Correct Installation.
Ensure the screw head is flush with the surface. ✔️ [Symbol indicating correct installation].
-
Step 4: Warning Example.
⚠️ [Warning symbol with drill and screw]. This illustration typically depicts a common mistake or hazard, such as incorrect angle or excessive force during installation.
-
Step 5: Screw and Washer.
Illustration shows a screw and a washer, suggesting their use together for optimal performance.
-
Step 6: Application Scenario.
Depicts the screw being used to fasten a Duplex Coated metal sheet to a wooden substrate.
-
Step 7: Final Check.
✔️ [Checkmark symbol] indicates correct installation. ⚠️ [Warning symbol with exclamation mark] may highlight a final critical check or a potential issue to avoid.
Document Reference: 2308853-11.2020
