DRAGGAN Trolley Assembly Instructions
This document provides assembly instructions for the DRAGGAN trolley by IKEA. The DRAGGAN is a versatile, three-tiered rolling cart designed for storage and organization in various home settings.
Illustration of the DRAGGAN trolley: a three-tiered metal cart with a silver-colored frame and four wheels.
Parts and Tools Required
Parts
- 20x Screws
- 4x Springs
- 4x Casters (wheels)
Tools
- [screwdriver] A screwdriver is required for assembly.
Illustrations show the required parts: screws, springs, and casters. A screwdriver is indicated as the necessary tool.
Safety and assembly tips: Do not use power tools (❌). Assemble on a soft surface like a rug to prevent scratches. If unsure, consult the instructions or contact IKEA.
Assembly Steps
Step 1: Attach Springs
Insert 4 springs into the designated holes at the top ends of the two main side frame pieces.
Illustration shows springs being inserted into the top of the vertical side frame pieces.
Step 2: Attach Casters
Attach the 4 casters (wheels) to the bottom ends of the two side frame pieces. Ensure they click into place securely.
Illustration shows casters being pushed into the bottom of the side frame pieces until they 'click'. A 'no power tool' symbol is shown next to the caster connection.
Step 3: Attach Shelves
Position the three shelves between the side frames. Secure each shelf to the side frames using the 20 screws provided. Ensure all screws are tightened.
Illustration shows the three shelves being attached to the assembled side frames using screws. A close-up shows screws being inserted and tightened.
Step 4: Attach Top Frame
Attach the top frame piece (which includes the handles) to the top of the side frames. This may involve aligning holes and securing with screws if applicable, or fitting into pre-existing slots.
Illustration shows the top handle/frame being attached to the top of the assembled structure.
Step 5: Final Check
Ensure all parts are securely fastened and the trolley is stable. The DRAGGAN trolley is now ready for use.
Illustration shows the fully assembled DRAGGAN trolley.








