Rexing Night Vision Scope NVS1

Overview

Thank you for choosing REXING!

We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact Rexing customer support.

Email: care@rexingusa.com

Phone: (877) 740-8004

Rexing is committed to providing a surprise with every product.

Connect with Rexing:

• Facebook
• Instagram
• Product Registration

Warning

• Do not look directly at the IR infrared light, as it can damage your eyes.
• Massive power is gathered when the infrared light is turned on. Do not aim at flammable items at close range, as it may cause fire. Please turn off the infrared light to reduce battery energy consumption.
• Please use a rechargeable battery with a rated voltage of 3.7V.
• Attempts to disassemble or repair the device without authorization will void the warranty. Please contact Rexing customer service team if you need assistance.

What's in the box?

The package includes:

1. Night Vision Scope
2. USB to Mini-USB Cable
3. 18650 Lithium Battery
4. Tape X 1
5. Case
6. O-Ring X 2
7. L-Shape Hex Key
8. Gasket X 1
9. Screws x 2
10. User Manual

Product Overview

The Rexing NVS1 features:

• Infrared Flashlight
• Lens Focus
• Red Dot Light
• Shot/Video/Ok Button
• Lens Focusing Wheel
• Up Button/Zoom In
• Down Button/Zoom Out
• Switch Button/Mode
• Red Dot Light Switch
• Wi-Fi Switch Button

Specifications

Install Batteries

Unscrew the battery cover and use an 18350 lithium-ion rechargeable battery with a rated voltage of 3.7V. Install it with the positive electrode facing inward and ensure the battery cover is tightened.

Insert/Remove a Memory Card

• Please use a Class 10 Micro SD card up to 32GB (sold separately).
• Open the card slot cover.
• Insert the Micro SD card into the slot, ensuring correct orientation. Do not insert the card forcibly.
• Format the Micro SD card within the device to improve compatibility.
• To remove the card, gently press the edge of the memory card in; it will pop out.

Note: The device will prompt "Please insert SD card" if the Micro SD card is not installed.

Adjustments

After installing the battery, perform a simple test:

1. Rotate and adjust the eyepiece diopter adjustment ring until the four-character icon is visible on the screen.
2. Rotate the objective lens adjustment ring until your target is clear.
3. Switch between modes and test the red dot aiming positioning light and the infrared flashlight.

Match with Rifle Gun Scope Sight

This product is equipped with a thick ring and electrical insulating tape to accommodate external rifle scope interfaces ranging from 39-45mm, ensuring market universality.

Use the hexagonal wrench to tighten the screws for a simple and secure attachment.

Basic Operations

Turn On or Turn Off

Long press the power button [⏻] for 3 seconds to turn on or turn off the night vision function.

Changing the Modes

The night vision device has three modes: photo, video, and playback. Press the Mode button [MODE] to switch between them.

Photo Mode

Use this mode for taking still photos.

Video Mode

Use this mode for recording video.

Playback Mode

Use this mode for playing recorded files.

Taking Pictures

1. Turn on the device. The default mode is video mode. Press the Mode button [MODE] to switch to photo mode.
2. Zooming: Press the [▲] or [▼] button to zoom in or out. The magnification level will appear on the LCD screen.
3. Taking Photos:
   • View your subject via the LCD screen.
   • Adjust focus using the focus wheel until the screen display is clearest.
   • For low-light conditions, short press the [MODE] button to switch to infrared black and white mode. Long press the flashlight button [?] to turn on the infrared light. Adjust the flashlight lens to control brightness and range.
   • Short press the menu button [≡] to toggle the crosshair display (ON/OFF). If using an external rifle scope, align the scope's reticle with the device's crosshair and then disable the device's crosshair.
   • Long press the menu button [≡] to activate the infrared auxiliary aiming red dot indicator [?].
   • Press the shutter button [?] to take photos.

Recording Video

1. Turn on the device. Ensure it is in Video mode by pressing the Mode button [MODE] if necessary.
2. Zooming: Press the [▲] or [▼] button to zoom in or out. The magnification level will appear on the LCD screen.
3. Start Recording:
   • View your subject via the LCD screen.
   • Adjust focus using the focus wheel until the screen display is clearest.
   • For low-light conditions, short press the [MODE] button to switch to infrared black and white mode. Long press the flashlight button [?] to turn on the infrared light. Adjust the flashlight lens to control brightness and range.
   • Short press the menu button [≡] to toggle the crosshair display (ON/OFF). If using an external rifle scope, align the scope's reticle with the device's crosshair and then disable the device's crosshair.
   • Long press the menu button [≡] to activate the infrared auxiliary aiming red dot indicator [?].
   • Press the record button [▶️] to start recording.
4. Finish Recording:
   • Press the record button [▶️] again to stop recording.
   • The device will stop recording automatically when the memory card is full.

Settings in Photo and Video Mode

Press the menu button [≡] in photo or video mode to access settings:

Playback

1. Turn on the device and press the Mode button [MODE] to enter playback mode.
2. Use the Up/Down buttons to browse photos and video files.
3. Play Video: Press the Play button [▶️] to start playing videos. Press it again to pause. Press the Menu button [≡] to stop playback.
4. Playback Menu: In playback mode, press the Menu button [≡] to access the playback menu. Use the Up/Down keys to select options like "Delete This", "Delete All", "Lock This", "Lock All", "Unlock This", "Unlock All". Press the Shutter button [?] to confirm selections.

Playback Menu List

Remote Control by Mobile App/Wi-Fi Connecting

Control the device remotely using the "Digital Aim" app, available on the Apple App Store and Google Play Store.

Connect Camera and Tablet/Smartphone via Wi-Fi

1. Long press the Mode Button [MODE] to turn on the device.
2. Press the Wi-Fi button [?] to enter Wi-Fi mode (a Wi-Fi icon will appear on the LCD screen).
3. On your smartphone, open Wi-Fi settings, find the network "NV_xxxxxxxxxxxx", and connect using the initial password "123456789".
4. Once connected, open the "Digital Aim" app on your smartphone. You can now view real-time images, control settings, record videos, take photos, and manage files.

Photo Mode (App)

• View the current real-time image.
• Click the Video button [▶️] to record. Click again to stop.
• Click the Photo button [?] to switch to photo mode and take a photo.

File Mode (App)

• View and play photos and videos stored on the device's Micro SD card. Select, download, or delete files using the [✓] button.
• View and play downloaded local photos and videos on your phone. Select, download, or delete files using the [✓] button.

Setting Mode (App)

• Calibrate product time with one click.
• Remotely adjust menu parameters.
• After finishing settings, press the Home button [⌂] to exit Wi-Fi mode.

Download files to PC

Files can be downloaded to a computer in two ways:

• Using a Card Reader: Eject the memory card from the device, insert it into a card reader, and connect the reader to your computer. Open "My Computer" or "Windows Explorer", access the removable disk representing the memory card, and copy files to your computer.
• Connecting via USB Cable: Turn on the night vision device and connect it to your computer using the supplied USB cable. The device will appear as "MSDC" on the screen. Open "My Computer" or "Windows Explorer", find the "Removable Disk" icon, and navigate to the "DCIM" folder to copy files.

Notes on Cleaning

• Use only a dry cloth to clean the exterior.
• Do not use cleaning fluids to avoid damaging electronics.
• Clean eyepieces and lenses with a soft, lint-free cloth (e.g., microfiber).
• Use gentle pressure when cleaning lenses to prevent scratches.
• Protect the device from dust and moisture by storing it in a bag or box.
• Remove batteries if the device will not be used for an extended period.

Warranty & Support

Warranty

The Rexing Night Vision Scope includes a 12-month warranty. Register your product on the Rexing website (https://www.rexingusa.com/support/registration/) to extend the warranty to 18 months.

Support

For product questions, contact Rexing customer support at care@rexingusa.com or call (877) 740-8004. Responses are typically provided within 12-24 hours.

Your opinion matters

Rexing is dedicated to improving its products, services, and user experience. Constructive feedback and suggestions are welcome at care@rexingusa.com.

Thank you for choosing Rexing!

FCC Compliance

FCC ID: 2AWNU-NV3XXX

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.