R-Go HE Break Ergonomic Mouse
User Manual and Setup Guide
Introduction
Congratulations on your purchase of the R-Go HE mouse!
This ergonomic mouse features a vertical grip for a natural, relaxed hand and wrist position. It promotes forearm movements over wrist movements, helping to prevent Repetitive Strain Injury (RSI). Its lightweight design reduces muscle tension, contributing to a healthier lifestyle.
System Requirements/Compatibility: Windows XP/Vista/10/11, MacOS.
For more information, scan the QR code or visit: https://r-go.tools/hewireless_web_en
Product Overview
The R-Go HE Break mouse is available in small, medium, and large sizes, with Bluetooth connectivity, and in left-handed and right-handed versions.
Key Components:
- 01: Connection for charging cable
- 02: Left (primary) button
- 03: Scroll wheel
- 04: Right (secondary) button
- 05: Forward button (not for MacOS)
- 06: Backward button (not for MacOS)
- 07: Sensor
- 08: On/off button
- 09: USB cable (for charging only)
- 10: Pair button
- 11: DPI button
- 12: Bluetooth dongle
Illustrations in this manual show the right-hand version of the mouse, detailing the placement of these components.
Setup
For computers without Bluetooth connection:
- Insert the Bluetooth dongle (12) into a USB hub on your computer.
- Note: This step is only necessary if your computer does not have built-in Bluetooth.
Connecting to Windows:
- Flip the on/off switch (08) on the bottom of the mouse to "ON".
- Click the Windows icon on your screen or press the Windows key on your keyboard.
- Type "Bluetooth and other device settings" and select the option.
- If Bluetooth is not enabled, check the box to turn it on.
- In the new window, click "Add Bluetooth or other device".
- Select "Bluetooth".
- Press the pair button (10) on the bottom of the mouse and select the newly appeared device from the list.
- Your device will establish a connection with the mouse.
- On subsequent startups or when turning the mouse on, simply click any button to connect.
Connecting to Mac OS:
- Flip the on/off switch (08) on the bottom of the mouse to "ON".
- Click the Apple icon in the top-left corner of the screen and select "System Preferences".
- In the window that appears, click on "Bluetooth".
- If Bluetooth is not already active, select "Turn Bluetooth on".
- Press the pair button (10) on the bottom of the mouse and select the newly appeared device from the list.
- Your device will establish a connection with the mouse.
- On subsequent startups or when turning the mouse on, simply click any button to connect.
DPI Switch:
To change the DPI mode, click the DPI button (11). DPI (Dots Per Inch) affects cursor movement sensitivity. A lower DPI requires larger physical movements for the cursor to travel the same distance on screen, encouraging arm movement over wrist movement to help prevent RSI.
R-Go Break Software
Download the R-Go Break software at https://r-go.tools/bs.
This software is compatible with all R-Go HE Break mice and keyboards. It provides insights into your work habits and allows for mouse button customization.
The R-Go Break software serves as a break reminder. While you work, it controls an LED light on your mouse or keyboard, acting as a traffic light indicator: Green signifies healthy work, Orange indicates it's time for a short break, and Red means you've been working too long. This provides positive feedback on your break behavior.
For more information about the R-Go Break software, scan the QR code or visit: https://r-go.tools/break_web_en
Maintenance
- Keep the mouse away from water, as it can damage internal electronic parts.
- To clean, disconnect the device from your PC. Do not use alcohol, water, or soap, as these can damage the mouse's coating. Use a damp cloth with water.
- Do not remove the rubber parts on the bottom of the mouse, as they cannot be reattached and will affect smooth movement.
- Ensure the laser on the bottom of the mouse is not obstructed.
Troubleshooting
If your mouse is not functioning correctly or you encounter issues:
- Verify the mouse is properly connected (refer to pages 4-6).
- Click the "Pair" button on the bottom of the mouse to initiate pairing. Check if the device appears on screen. If not, restart your computer.
- Test the mouse on another device. If it still does not work, contact us via info@r-go-tools.com.