Icom IC-F1000 / IC-F2000 Series VHF/UHF Transceivers Instructions

Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product.

Product Overview

The Icom IC-F1000 and IC-F2000 series are VHF/UHF transceivers. This document provides instructions for their use, including details on battery packs, chargers, antennas, and other accessories.

Battery Packs

The following battery packs are available:

BP-278/BP-279/BP-280 BATTERY PACK: Available in different capacities providing varying battery life (10-20 hours depending on model and usage).

Options

Chargers

BC-213 DESKTOP CHARGER: For rapid charging of a single battery pack. Can be used with a power adapter or the CP-23L cigarette lighter cable.
BC-214 MULTI CHARGER: For rapid charging of up to 6 battery packs. Can be used with the BC-157S AC adapter or the OPC-656 DC POWER CABLE.

DC Cables

CP-23L CIGARETTE LIGHTER CABLE: For charging from a 12V socket (use with BC-213).
OPC-656 DC POWER CABLE: For use with a 13.8V power source (use with BC-214).

Antennas

A variety of VHF and UHF antennas are available, including standard, stubby, and cut antennas, covering various frequency ranges.

Others

MB-130 MOBILE BRACKET: For mounting the BC-213 desktop charger.
MB-133 BELT CLIP: For attaching the transceiver to a belt.
Speaker Microphones (HM-158LA, HM-159LA, HM-222HLWP): Provide convenient operation and high audio output (for specific models).
Earphone-Microphones (HM-153LA, HM-166LA): Ideal for hands-free operation.
Headsets (HS-94, HS-95, HS-97) with PTT switch cables (VS-4LA) or adapter cables (OPC-2004LA): For use with transceivers, some supporting VOX operation.
Headsets (HS-94LWP, HS-95LWP): Waterproof versions of the headsets.

Note: Some options may not be available in all countries.

Supplied Accessories

The following accessories are typically supplied with the transceiver:

Battery pack
Battery charger
Belt clip
Power adapter (for the battery charger)
Flexible antenna

Note: The supplied accessories may vary depending on the transceiver version.

Panel Description

The transceivers (IC-F1000/F2000 series) come in three types: Non-display (Basic), Simple (4-key), and 10-key types. The panel includes:

Antenna Connector
[PTT] button
[VOL] knob
[ROTARY SELECTOR]
[Emer] button
Speaker
Speaker-Microphone Jack
LED Indicator: Indicates transmitting (red), receiving (green), or incoming calls (orange). Blinks green for low battery.
FUNCTION DISPLAY: Shows signal strength, power status, channel information, and messages. Icons include: SIGNAL STRENGTH INDICATOR, LOW POWER ICON, AUDIBLE ICON, COMPANDER ICON, SCRAMBLER ICON, BELL ICON, SCAN ICON, KEY LOCK ICON, BATTERY INDICATOR, ALPHANUMERIC READOUT.
[UP] / [DOWN] buttons
[P0] - [P3] buttons
10-KEY PAD (on 10-key type models)

The illustration shows the 10-key type transceiver. Some features may vary depending on the transceiver version.

Basic Operation

Battery Charging

Rapid charging the supplied BC-213: The BC-213 desktop charger rapidly charges Li-ion battery packs. Charging time for BP-279 is approximately 2 to 3 hours. The charge indicator lights orange while charging and green when complete. Charging should be done within a specified temperature range (+10°C ~ +40°C).

Rapid charging the BC-214: The BC-214 multi charger can charge up to 6 battery packs simultaneously. Charging time for BP-279 is approximately 2 to 3 hours.

Turning ON the transceiver

Rotate the [VOL] knob to turn the transceiver ON.

Receiving and Transmitting

Receiving: 1. Select a channel using the [ROTARY SELECTOR] or memory channel keys. 2. Adjust the audio output level using the [VOL] knob.

Transmitting: 1. Ensure the channel is clear. 2. Hold down the [PTT] button and speak at a normal voice level, holding the microphone 5-10 cm (2-4 inches) from your mouth. 3. Release the [PTT] button to receive.

Important for transmitting: 1. Pause briefly after pressing [PTT] before speaking. 2. Speak clearly at a normal voice level.

	ICOM IC-V88 and IC-U88 VHF/UHF Transceiver User Manual Comprehensive instructions for the ICOM IC-V88 VHF and IC-U88 UHF transceivers, covering safety precautions, panel descriptions, function display, and battery charging.
	Icom IC-A16 VHF Air Band Transceiver Accessories - SAR Report Appendix This document details the various accessories available for the Icom IC-A16 VHF Air Band Transceiver, including belt clips, hangers, speaker-microphones, headsets, chargers, batteries, and antennas, as presented in Appendix 3 of a Specific Absorption Rate (SAR) report.
	Icom IC-F200 UHF Transceiver User Instructions and Safety Information Comprehensive user instructions and safety guidelines for the Icom IC-F200 UHF Transceiver, covering operation, charging, precautions, and RF exposure.
	Icom Ham Radios and Receivers: Comprehensive Option List A detailed list of optional accessories for Icom's range of ham radios and receivers, including base stations, multi-band units, and handhelds. Covers microphones, speakers, amplifiers, antennas, power supplies, software, and more.
	Icom IC-M90 VHF Marine Transceiver Instruction Manual This manual provides detailed operating instructions for the Icom IC-M90 VHF Marine Transceiver, covering safety precautions, basic operations, scanning functions, and maintenance.
	Icom IC-T7H Dual Band FM Transceiver Instruction Manual Comprehensive instruction manual for the Icom IC-T7H Dual Band FM Transceiver, covering operation, features, specifications, and troubleshooting.
	ICOM IC-48A/E UHF FM Transceiver Instruction Manual This manual provides detailed instructions for the operation, installation, and maintenance of the ICOM IC-48A/E UHF FM transceiver. It covers features, control functions, mobile and fixed installations, basic operation, memory mode, scanning functions, duplex mode, call channel function, and optional units.
	ICOM OPC-2389 Connection Cable Instructions Detailed instructions for connecting the ICOM OPC-2389 serial communication cable to VE-PG3 and VE-PG4 devices, including connector replacement guidance and wire assignments.