Trust Vigor 2.0 Speaker Set for PC and Laptop

1. Setup

This section details the initial setup of the Trust Vigor 2.0 speaker set. The diagram illustrates the two speakers, each featuring a front-facing grille. One speaker has a prominent control knob labeled "Volume" for adjusting the sound level. The necessary connection cables are also shown: a USB connector for power and data, and a 3.5mm audio jack for audio input.

Key components shown:

• Two speakers
• Volume control knob [?]
• USB connector [?]
• 3.5mm audio jack [?]

2. Installation

This section provides three different connection options for installing the speaker set with a PC or laptop.

Option 1

Connect the speaker set using both the USB connector and the 3.5mm audio jack. The USB connector is plugged into a USB port on the computer, and the 3.5mm audio jack is plugged into the computer's audio output port. This setup typically provides both power and audio signal.

Option 2

Connect the speaker set using only the USB connector. The USB connector is plugged into a USB port on the computer. This option implies that the USB connection handles both power and audio, or that audio is routed through USB.

Option 3

Connect the speaker set using only the 3.5mm audio jack. The 3.5mm audio jack is plugged into the computer's audio output port. This option implies that the speakers receive power from a separate source (not detailed in this diagram, but often via a separate power adapter or USB for power only).

Each option also indicates a power requirement, noted as "5V/1A" [⚡].

3. Software Installation (Windows)

This section guides users through connecting the speakers in Windows operating systems.

Windows 8

The diagram shows the Windows 8 Start screen. A pointer indicates the starting point for installation, labeled "Start here" [▶️].

Windows 10/8/7

The installation process involves selecting the correct audio output device in Windows settings.

1. In the Windows taskbar, click the sound icon. The system displays available audio devices. The example shows "Speakers (Realtek High Definition Audio)" and the language set to English (ENG).
2. Access the volume control. The diagram shows a volume slider set to "70". The audio device is identified as "(Generic Audio Device)".

Support and Information

For frequently asked questions and further support, please visit: www.trust.com/21759/faq.

This product is manufactured by Trust International BV, located at Laan van Barcelona 600, 3317DD, Dordrecht, NL. All rights reserved. © 04-10-2016.