Remote Control Setting
Remote Control Overview
The remote control allows for various settings adjustments for the Lightdot LED High Bay Lights. Key functions include switching between Normal Mode and Sensor Mode, setting hold times, and adjusting detection sensitivity.
Button Functions
| Button | Functional |
|---|---|
ON/OFF Normal Mode |
Press the "ON/OFF" button for constant on/off mode; the sensor is disabled. Turning the light off and then on again will set it to constant on mode. Short press the "Sensor Mode" button to activate the sensor. Short press the "Sensor Mode" button to quit constant on/off mode; the sensor starts to work, and all parameters revert to the last settings. |
Sensor Mode |
Short press the "Sensor Mode" button to quit constant on/off mode. The sensor starts to work, and all parameters revert to the last settings. |
Hold Time Buttons: 5S, 30S, 1min, 5min, 10min |
Set hold time: 5S/30S/1min/5min/10min |
Sensitivity Buttons: HS (High Sensitivity) LS (Low Sensitivity) |
Set up high sensitivity: To enter the highly sensitive detection, first press the key HS and then select the detection range. Detection Area: 25%, 50%, 75%, 100% |
|
Set up low sensitivity: To enter the highly sensitive detection, first press the key LS and then select the detection range. Detection Area: 25%, 50%, 75%, 100% |
