Installation Guide
IMPORTANT: Read all safety precautions and installation instructions carefully before installing.
- Do not handle any energized fixture or attempt to energize any fixture with wet hand or while standing on a wet or damp surface or in water.
- The fixture is designed for use in 120VAC, 60Hz fused circuit. Do not use on a dimming circuit.
- Easy to install, no tools needed, assembly the products following instructions.
ASSEMBLY INSTRUCTIONS
- Screw Tube (A) clockwise into Tube (B) until secure; pull any excess cord through Tube (B).
- Repeat Step 1 for Tubes (C),(D).
- Screw Tube (D) clockwise into Base (E) until secure; pull any excess cord through Tube (D).
- Insert G9 bulb into lamp socket; tighten the ball lamp shade clockwise on.
- Turn the switch to increase or decrease the fixture luminance.
Guarantee
If your product does not arrive in good condition or does not work great 100% Satisfaction Guarantee within 3 years, please let us know we will give you replacement or refund. Customer service: service@lightdot.com
Version: 1409020984-V1
