Manuals+

RB-MAM-3500 Replacement Main Display for FX-3500 Fire Alarm Control Panel

The RB-MAM-3500 kit includes all necessary parts to replace a damaged MAM-3500 Main Display on an FX-3500 Fire Alarm Control Panel.

Parts List

Installing the MAM-3500 Main Display

To install the MAM-3500, follow these steps:

  1. Power down the FX-3500.
  2. Replace the MAM-3500.
  3. Power up the FX-3500.

Refer to the sections below for detailed instructions.

A. Power down the FX-3500

  1. Disconnect the backup batteries.
  2. Disconnect the AC power going to the FX-3500 panel.

B. Replace the MAM-3500

  1. Disconnect the ribbon cable connected to P4 on the damaged MAM-3500 main display.
  2. Disconnect the ribbon cable connected to P2 on the damaged MAM-3500 main display.
  3. Remove the screws securing the MAM-3500 to the door.
  4. Remove the damaged MAM-3500 and replace it with the new MAM-3500.
  5. Attach the new MAM-3500 using the provided screws or the screws removed in step 3.
  6. Connect the ribbon cable from the main panel to P4 on the MAM-3500.
  7. Connect the ribbon cable from the adder annunciator board to P2 on the MAM-3500.

Figure 1: Locations of connectors on the MAM-3500. This diagram shows the P2 ribbon cable connector for the adder annunciator board and the P4 ribbon cable connector for the main panel on the MAM-3500 unit.

Figure 2: Location of MAM-3500 on the FX-3500 door. This illustration depicts the MAM-3500 mounted on the FX-3500 door, highlighting the securing screws and the adder annunciator boards.

C. Power up the FX-3500

  1. Connect the AC power to the FX-3500 panel.
  2. Connect the backup batteries.

PDF preview unavailable. Download the PDF instead.

LT-2072 RB-MAM-3500 Display Installation Instructions Acrobat Distiller 10.0.0 (Windows)

Related Documents

Preview MGC SGM-1004S: 4 NAC Output Module with Built-in Synchronization
The MGC SGM-1004S is a 4 NAC output module designed for fire alarm control panels, offering built-in synchronization for system devices like horns and strobes. It supports various wiring configurations and provides flexibility for synchronized signaling.
Preview MGC ANC-6000 Audio Network Controller Board Installation Instructions
Installation instructions for the MGC ANC-6000 Audio Network Controller Board, detailing module mounting, board layout, DIP switch configuration for addressing, and wiring for audio sources and paging microphones. Includes diagrams and technical specifications for system integration.
Preview MGC RAXN-UB-BRACKET Installation Instructions: Module Mounting Bracket
Installation guide for the MGC RAXN-UB-BRACKET module mounting bracket, detailing kit contents and assembly steps for mounting the RAXN-4000LCDGC module onto a fire alarm enclosure's inner deadfront chassis.
Preview MGC RA-1000 Series Remote Multiplex Annunciator Panels Installation and Wiring Manual
This manual provides installation and wiring instructions for the MGC RA-1000 Series Remote Multiplex Annunciator Panels, including details on mechanical installation, wiring, DIP switch settings, and specifications.
Preview MGC BB-4002R and BB-4006R Multi Module Enclosures: Dimensions and Wiring Guide
Detailed dimensions, wiring diagrams, and cable routing instructions for MGC BB-4002R and BB-4006R Multi Module Enclosures, designed for MIX-4000-M Series Modules.