RYOBI RGLM18 Cordless Glue Gun
User Manual and Operating Instructions
Introduction
It is essential that you read the instructions in this manual before assembling, maintaining, and operating the product.
This manual provides important information regarding the safe assembly, operation, and maintenance of your RYOBI RGLM18 cordless glue gun. Please read all instructions carefully before use.
Product Purpose
The glue gun is designed for applying hot glue. Do not use this product for any purpose other than its intended use. Using the tool in any unauthorized way is dangerous.
Safety Warnings
General Safety
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user-maintenance shall not be made by children without supervision.
- When the product is not in use, it must be placed on its stand.
- If the product is not to be used for a longer period, the batteries should be removed.
- Do not short-circuit the power contacts.
Battery Safety
- To avoid fire, injury or product damage due to short circuit, do not immerse the tool, interchangeable battery pack or charger in liquids and do not allow liquids to flow into them. Corrosive or conductive liquids, such as seawater, certain chemicals and bleaches or products containing bleaches, can cause short circuits.
Battery Transport
- Lithium batteries must be transported in accordance with local and national regulations.
- Follow all special requirements for packaging and labelling when transporting by a third party.
- Ensure that no batteries come into contact with other batteries or conductive materials during transport. Secure exposed terminals with non-conductive caps or tape. Do not transport cracked or leaking batteries. Consult a shipping company for detailed advice.
General Precautions
- ⚠️ Safety Warning: Read all instructions.
- ❌ Do not use in rain.
- ? Do not expose to moisture or use in wet locations.
- ?️ Hot surface: Avoid contact with hot surfaces to limit the risk of injury or damage.
- ♻️ Recycling: Used electrical products should not be disposed of with household waste. Please recycle at appropriate facilities. Check with your local authority or retailer for recycling advice.
- ? Lock: Indicates a locked state or safety feature.
- ℹ️ Information: For additional notes or details.
- ⏱️ Wait time: Indicates a period for heating or cooling.
- ❌ Off: Indicates the power is switched off.
- ? Accessories sold separately: Indicates items not included with the main product.
Product Components
Refer to the diagram on page 5 for component identification.
- 1. Glue stick chamber
- 2. LED power indicator
- 3. Nozzle
- 4. Handle
- 5. Trigger
- 6. Drip tray
- 7. On/Off switch
- 8. LED power indicator (Note: This appears to be a duplicate label in the diagram)
- 9. Stand
- 10. Battery socket
- 11. Glue stick
- 12. Operator's manual
- 13. Battery
- 14. Charger
Operation
Getting Started
- Insert Glue Stick: Place a glue stick (11) into the glue stick chamber (1). Ensure it is fully inserted.
- Insert Battery: Insert a compatible battery pack (13) into the battery socket (10) until it clicks into place.
- Power On and Heat Up: Slide the On/Off switch (7) to the 'On' position. The LED power indicator (2) will illuminate. Allow approximately 4 minutes for the glue gun to heat up to operating temperature.
- Apply Glue: Squeeze the trigger (5) to dispense hot glue.
- Power Off and Standby: When finished, slide the On/Off switch (7) to the 'Off' position. Place the glue gun on its stand (9) to prevent accidental contact with hot surfaces and to catch drips.
Storage
- Place the glue gun on its stand (9).
- Allow the glue gun to cool down completely before storing.
- Remove the battery pack if storing for an extended period.
- Store the glue gun and accessories in a dry, safe place.
Product Specifications
| Specification | Value |
|---|---|
| Model | RGLM18 |
| Voltage | 18 V |
| Nozzle Hole Diameter | 1.8 mm |
| Glue Stick Diameter | 7.0 mm |
| Approx. Heating Time | 4 minutes |
| Weight (without battery) | 0.4 kg |
| Weight (with battery, EPTA) | 0.85 kg (1.3Ah) - 1.6 kg (9.0Ah) |
Battery and Charger Compatibility
This tool is compatible with RYOBI 18V Lithium-Ion battery packs.
- Compatible Battery Packs (not included): RB18L.., BCL1418..H, RC18..
- Compatible Chargers (not included): RB18L.., BCL1418..H, RC18..
Warranty Information
The product is covered by a 24-month warranty for consumers, starting from the date of purchase. Proof of purchase (invoice or receipt) is required.
The warranty covers manufacturing defects and material faults present at the time of purchase. It is limited to repair or replacement and does not cover consequential damages.
The warranty does not apply to damage caused by improper use, lack of maintenance, unauthorized modifications, or use with non-approved accessories or parts.
For warranty service, contact an authorized RYOBI service center. Details can be found at www.ryobitools.eu.
