RYOBI R18GLU Cordless Glue Gun

Product Overview

The RYOBI R18GLU is a cordless 18V glue gun designed for efficient and reliable application of hot melt glue. It is part of the RYOBI ONE+ system, offering convenience and portability.

Safety Instructions

Important: Read all instructions and warnings before use. Failure to follow these instructions may result in electric shock, fire, or serious injury.

General Safety

• This appliance is not intended for use or cleaning by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised by a responsible person.
• Children must not use, clean, or play with this device.
• Store unused devices safely out of reach of children.
• Always operate the tool with a clear understanding of its functions and limitations.
• Keep bystanders and children away from the work area.
• Do not use in explosive atmospheres (e.g., near flammable liquids, gases, or dust).
• Avoid contact with earth or grounded surfaces.
• Do not expose the tool to rain or water.
• Do not use the tool when tired, under the influence of drugs, alcohol, or medication.
• Ensure the switch is in the OFF position before connecting power or inserting/removing the battery.
• Do not overreach; maintain a stable footing and balance at all times.
• Do not wear loose clothing, jewelry, or long hair, as they can come into contact with the hot nozzle.
• If the switch does not operate correctly, do not use the tool. Get it repaired.
• Remove the battery before making adjustments, changing accessories, or storing the tool.

Hot Glue & Nozzle Safety

• The nozzle and hot glue are extremely hot and can cause severe burns.
• Do not lay the hot glue gun on its side. Use a protective surface (e.g., paper, cardboard) to catch dripping glue and prevent damage.
• Do not touch the hot nozzle.
• Use the glue gun in a well-ventilated area to avoid inhaling glue fumes.
• Do not point the nozzle at yourself or others.
• Do not use the tool for overhead gluing.
• Wait for the hot glue to cool and dry completely before handling glued objects.
• Only use glue sticks specified for this tool.
• Do not insert fingers or foreign objects near the nozzle, especially when loading a new glue stick.
• Never leave the glue gun unattended when it is switched on.
• Do not apply more glue than necessary.
• When applying hot glue to thin or porous materials, be cautious as the surface below may be damaged or the glue may adhere strongly.
• Do not force the trigger when applying hot glue; this could damage the tool. Test on a scrap piece of material to ensure glue flows freely.
• Do not press glued objects with your fingers immediately after application, as this may cause glue to ooze out or heat to transfer, leading to burns.
• For very small objects, use tweezers or pliers to avoid getting too close to the hot nozzle.
• Before removing the battery, wait for the glue stick and nozzle to cool down completely.

Battery Safety

• Only charge batteries with the charger specified by the manufacturer.
• Keep batteries away from metal objects (paper clips, coins, keys, screws) to prevent short circuits.
• Do not expose batteries to fire or extreme heat. Damaged batteries may explode.
• In case of battery leakage, avoid contact with skin or eyes. If contact occurs, wash immediately with soap and water or flush eyes with plenty of water and seek medical attention.
• Do not crush, drop, or damage the battery.
• Do not use the tool or battery if it has been dropped or severely damaged.
• Do not store batteries in hot environments (e.g., near radiators or in direct sunlight).
• Charge batteries within an ambient temperature range of 10°C to 38°C.
• Remove batteries from the device before charging.
• Ensure correct polarity when inserting batteries.
• Dispose of used batteries properly.
• If the tool will be stored without use for an extended period, remove the batteries.
• Do not short-circuit the battery terminals.

Battery Transport

• Transport lithium-ion batteries according to local and national regulations.
• Follow specific packaging and labeling requirements for third-party transport.
• Ensure batteries do not come into contact with other batteries or conductive materials during transport. Use insulating covers or tape.
• Do not transport cracked or leaking batteries.

Maintenance and Care

• Disconnect the battery before performing any assembly, adjustments, cleaning, or maintenance.
• Use only identical replacement parts for repairs.
• Do not use solvents to clean plastic parts, as they can be damaged. Clean with a dry cloth.
• Always wear safety glasses with side shields when using the tool or when dust is generated. A dust mask may also be necessary.
• For safety and reliability, all repairs should be performed by an authorized service center.

Environmental Protection

• Recycle raw materials instead of disposing of them as waste.
• Sort tools, accessories, and packaging for recycling.

Product Features

The RYOBI R18GLU features:

• 1. Nozzle: The dispensing point for hot glue.
• 2. Glue Stick Chamber: Holds the glue stick.
• 3. LED Power Indicator: Shows the battery status or if the tool is powered on.
• 4. On/Off Switch: Controls the power to the tool.
• 5. Trigger: Controls the flow of glue.
• 6. Battery Compartment: Houses the RYOBI 18V battery.
• 7. Glue Stick: Consumable used for gluing.

Diagram Description: A line drawing shows the cordless glue gun. Key components are labeled with numbers: 1. Nozzle, 2. Glue stick chamber, 3. LED indicator, 4. On/Off switch, 5. Trigger, 6. Battery compartment, 7. Glue stick. An inset shows a close-up of the battery compartment.

Operating Instructions

1. Loading Glue Stick: Insert a glue stick (7) into the glue stick chamber (2) from the rear of the tool.
2. Inserting Battery: Ensure the On/Off switch (4) is in the OFF position. Slide a compatible RYOBI 18V battery into the battery compartment (6) until it clicks into place.
3. Powering On: Move the On/Off switch (4) to the ON position. The LED indicator (3) will illuminate.
4. Heating: Allow approximately 3 minutes for the glue to heat up and become ready for application.
5. Applying Glue: Squeeze the trigger (5) to dispense hot glue.
6. Cooling Down: After use, turn the tool OFF using the switch (4). Place the glue gun on a stable, heat-resistant surface. Allow the nozzle and any remaining glue to cool completely before storing or cleaning.

Illustration Description: Step-by-step images show: 1. Inserting a glue stick into the rear of the gun. 2. Attaching an 18V battery to the base of the gun. 3. A diagram showing the On/Off switch and a timer icon indicating 3 minutes for heating. It also shows a checkmark for correct placement (gun upright) and a cross for incorrect placement (gun on its side). 4. An illustration showing the gun being placed upright on a surface after use.

Technical Specifications

Compatible Batteries: RB18L13, RB18L15, RB18L20, RB18L25, RB18L40, RB18L50, BCL14181H, BCL14183H, RC18150, RC18627.

Warranty Information

This RYOBI product comes with a 24-month warranty for consumers, starting from the date of purchase. Proof of purchase (e.g., invoice) is required.

The warranty covers manufacturing defects. It does not cover damage caused by misuse, improper maintenance, unauthorized modifications, or normal wear and tear.

An extended warranty may be available for certain RYOBI tools through online registration within 30 days of purchase. Please visit the RYOBI website for details and eligibility.

For service, please contact an authorized RYOBI service center. You can find your nearest service agent at: http://uk.ryobitools.eu/header/service-and-support/service-agents

This warranty is valid in the European Union, Switzerland, Iceland, Norway, Liechtenstein, Turkey, and Russia. For other regions, please contact your local RYOBI dealer.

Symbols Used in Instructions

• [Danger]: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. (Corresponds to skull and crossbones symbol).
• ⚠️ Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. (Corresponds to triangle with exclamation mark).
• ⚠️ Caution: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. (Corresponds to triangle with exclamation mark).
• ℹ️ Note: Indicates a situation that may result in material damage. (Corresponds to circle with 'i').
• ✔️ Checkmark: Indicates correct procedure or safe practice.
• ❌ Cross Mark: Indicates incorrect procedure or unsafe practice.
• ⚡ Voltage (V): Indicates electrical potential.
• [DC] Direct Current: Indicates direct current.
• ? Hot Surface: Indicates a hot surface that can cause burns. (Corresponds to warning triangle with heat symbol).
• ♻️ Recycling Symbol: Indicates that the product should be recycled.
• CE: Indicates conformity with European Union regulations.
• EAC: Indicates conformity with Eurasian Economic Union regulations.
• [Ukrainian Compliance]: Indicates Ukrainian compliance.