Eltako Smart Home Accessories
This catalog presents a comprehensive range of Eltako accessories designed to enhance smart home installations, providing versatile solutions for lighting control, shading, audio, and system integration.
Blister Packs for Lighting Control
Eltako offers convenient blister packs that combine wireless switches and actuators for seamless smart home integration.
BPD: Dimming Blister Pack
Product: Blisterpack Dimmen BPD
Description: Includes the F2T65 wireless switch and the FUD61NPN-230V universal dimmer. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T65 Wireless Switch: Pure white glossy finish, for single mounting or E-Design65 switch systems. Generates its own energy for wireless telegrams via button press, eliminating the need for power supply lines and standby losses. A single rocker can send two distinct signals (press top, press bottom). The mounting plate can be screwed or adhered to surfaces.
- FUD61NPN-230V Universal Dimmer: Power MOSFET up to 300W. Automatic lamp detection. Standby loss of only 0.7W. Adjustable minimum brightness and dimming speed. Includes child room, sleep, and wake-up functions. Supports scene control. Features encrypted and bidirectional radio communication, with optional repeater function. Designed for flush mounting (45x45x33mm). Dims dimmable energy-saving lamps (ESL) and 230V LED lamps, depending on their electronics. Features soft start and soft stop for lamp protection. Operates on 230V supply, switching, and control voltage. No minimum load required. The last set brightness level is saved (memory function).
BPD55: Dimming Blister Pack
Product: Blisterpack Dimmen BPD55
Description: Combines the F2T55E wireless switch with the FUD61NPN-230V universal dimmer. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T55E Wireless Switch: Pure white glossy finish, for single mounting or E-Design55 switch systems (80x80x15mm). Generates its own energy for wireless telegrams via button press, eliminating power supply lines and standby losses. A single rocker can send two distinct signals (press top, press bottom). Mounting plate allows for screw or adhesive attachment.
- FUD61NPN-230V Universal Dimmer: Identical features to the FUD61NPN-230V described for the BPD model, supporting up to 300W dimming, automatic lamp detection, and various smart home functions.
BPD55-D62: Dimming Blister Pack [New]
Product: Blisterpack Dimmen BPD55-D62
Description: Features the F2T55E-wg 2-channel wireless switch and the FD62NPN-230V wireless universal dimmer-actuator. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T55E-wg 2-Channel Wireless Switch: For E-Design55 systems (80x80mm outer, 55x55mm inner frame, 15mm high). Generates energy from button presses for wireless telegrams, requiring no power supply or standby. Features a rocker for two signals (top/bottom press). Mounting plate for screw or adhesive fixing.
- FD62NPN-230V Wireless Universal Dimmer-Actuator: Utilizes Power MOSFET technology for dimming up to 300W for 230V incandescent and halogen lamps (depending on ventilation). Dims 230V LED lamps up to 300W (phase cut-off) or 100W (phase-angle), depending on lamp electronics. Not suitable for inductive transformers. Includes child room and sleep functions. No minimum load required. Standby loss of only 0.5W. Designed for flush mounting (49x51x20mm) with push-in terminals for conductors up to 2.5mm². Supports learning up to 32 wireless devices. Bidirectional radio is activatable. Zero-crossing switching with soft start/stop. Features overload and overtemperature protection. Can be controlled by a conventional 230V switch.
BPD55-FT55: Dimming Blister Pack [New]
Product: Blisterpack Dimmen BPD55-FT55
Description: Combines the FT55 wireless switch with the FUD61NPN-230V universal dimmer. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- FT55 Wireless Switch: Pure white glossy finish, for single mounting or 55mm switch systems (80x80x15mm). Generates energy from button presses, requiring no power supply or standby. A single rocker can send two distinct signals (press top, press bottom). Mounting plate allows for screw or adhesive attachment.
- FUD61NPN-230V Universal Dimmer: Identical features to the FUD61NPN-230V described previously, supporting up to 300W dimming and various smart home functions.
Blister Packs for Switching Control
These blister packs provide wireless switching solutions for various applications.
BPS: Switching Blister Pack
Product: Blisterpack Schalten BPS
Description: Includes the F2T65 wireless switch and the FSR61-230V wireless impulse switching relay. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T65 Wireless Switch: Pure white glossy finish, for single mounting or E-Design65 switch systems. Generates its own energy for wireless telegrams via button press, eliminating power supply lines and standby losses. A single rocker can send two distinct signals (press top, press bottom). Mounting plate allows for screw or adhesive attachment.
- FSR61-230V Wireless Impulse Switching Relay: 1 normally open contact, potential-free, 10A/250V AC. Suitable for incandescent lamps up to 2000W. Features fall-back delay with switch-off warning and optional continuous switching. Supports encrypted, bidirectional radio, and repeater function. Standby loss of only 0.8W. Designed for flush mounting (45x45x33mm). Retains switching state during power failures. Can be controlled by a conventional switch.
BPS55: Switching Blister Pack
Product: Blisterpack Schalten BPS55
Description: Combines the F2T55E wireless switch with the FSR61-230V wireless impulse switching relay. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T55E Wireless Switch: Pure white glossy finish, for single mounting or E-Design55 switch systems (80x80x15mm). Generates its own energy for wireless telegrams via button press, eliminating power supply lines and standby losses. A single rocker can send two distinct signals (press top, press bottom). Mounting plate allows for screw or adhesive attachment.
- FSR61-230V Wireless Impulse Switching Relay: Identical features to the FSR61-230V described for the BPS model, providing reliable switching control.
BPS55-L62: Switching Blister Pack [New]
Product: Blisterpack Schalten BPS55-L62
Description: Features the F2T55E-wg 2-channel wireless switch and the FL62-230V wireless light actuator. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T55E-wg 2-Channel Wireless Switch: For E-Design55 systems (80x80mm outer, 55x55mm inner frame, 15mm high). Generates energy from button presses for wireless telegrams, requiring no power supply or standby. Features a rocker for two signals (top/bottom press). Mounting plate for screw or adhesive fixing.
- FL62-230V Wireless Light Actuator: 10A/250V AC. Impulse switch with 1 normally open contact, potential-free. Suitable for 230V LED and ESL lamps up to 200W, and 230V incandescent and halogen lamps up to 1000W. Designed for flush mounting (49x51x20mm). Standby loss of only 0.4W. Features push-in terminals for conductors up to 2.5mm². Supports learning up to 32 wireless devices. Bidirectional radio is activatable. Retains switching state during power failures. Can be controlled by a conventional 230V switch.
BPS55-FT55: Switching Blister Pack
Product: Blisterpack Schalten BPS55-FT55
Description: Combines the FT55 wireless switch with the FSR61-230V wireless impulse switching relay. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- FT55 Wireless Switch: Pure white glossy finish, for single mounting or 55mm switch systems (80x80x15mm). Generates energy from button presses, requiring no power supply or standby. A single rocker can send two distinct signals (press top, press bottom). Mounting plate allows for screw or adhesive attachment.
- FSR61-230V Wireless Impulse Switching Relay: Identical features to the FSR61-230V described previously, providing reliable switching control.
Blister Packs for Shading Control
Control your blinds and shutters with these specialized blister packs.
BPL55: Shading Blister Pack
Product: Blisterpack Schalten BPL55
Description: Features the F1T55E wireless switch and the FSLA-230V wireless socket light actuator. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F1T55E Wireless Switch: Pure white glossy finish, for single mounting or E-Design55 switch systems (80x80x15mm). Generates energy from button presses, requiring no power supply or standby. A single rocker can send one signal (press bottom). Mounting plate allows for screw or adhesive attachment.
- FSLA-230V Wireless Socket Light Actuator: 10A/250V AC. Impulse switch with 1 normally open contact. Suitable for 230V LED and ESL lamps up to 200W, and 230V incandescent and halogen lamps up to 1000W. Standby loss of only 0.8W. Designed as a plug-in device for German protective contact sockets with increased touch protection. Supports learning up to 24 wireless devices.
BPB: Shading Blister Pack
Product: Blisterpack Beschattung BPB
Description: Combines the F2T65 wireless switch with the FSB61NP-230V wireless actuator for shading elements and roller shutters. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T65 Wireless Switch: Pure white glossy finish, with print, for single mounting or E-Design65 switch systems (84x84x16mm). Generates energy from button presses, requiring no power supply or standby. A single rocker can send two distinct signals (press top, press bottom). Mounting plate allows for screw or adhesive attachment.
- FSB61NP-230V Wireless Actuator for Shading/Roller Shutters: 1+1 normally open contacts, not potential-free, 4A/250V AC. Supports encrypted, bidirectional radio, and repeater function. Standby loss of only 0.8W. Designed for flush mounting (45x45x33mm). Features defined switch-off on power failure. Can be controlled by a conventional 230V switch.
BPB55: Shading Blister Pack
Product: Blisterpack Beschattung BPB55
Description: Features the F2T55E wireless switch and the FSB61NP-230V wireless actuator for shading elements and roller shutters. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T55E Wireless Switch: Pure white glossy finish, with print, for single mounting or E-Design55 switch systems (80x80x15mm). Generates energy from button presses, requiring no power supply or standby. A single rocker can send two distinct signals (press top, press bottom). Mounting plate allows for screw or adhesive attachment.
- FSB61NP-230V Wireless Actuator for Shading/Roller Shutters: Identical features to the FSB61NP-230V described for the BPB model, providing reliable control for shading elements.
BPB55-J62: Shading Blister Pack [New]
Product: Blisterpack Beschattung BPB55-J62
Description: Combines the F2T55E-wg 2-channel wireless switch with the FJ62NP-230V wireless blind and roller shutter actuator. Functions as a Smart Home Sensor and Smart Home Actuator.
Features:
- F2T55E-wg 2-Channel Wireless Switch: For E-Design55 systems (80x80mm outer, 55x55mm inner frame, 15mm high). Generates energy from button presses for wireless telegrams, requiring no power supply or standby. Features a rocker for two signals (top/bottom press). Mounting plate for screw or adhesive fixing.
- FJ62NP-230V Wireless Blind and Roller Shutter Actuator: 1+1 normally open contacts, 4A/250V AC, not potential-free. Designed for 230V AC shading element motors. Standby loss of only 0.6W. For flush mounting (49x51x20mm) with push-in terminals. Supports learning up to 32 wireless devices. Features zero-crossing switching. Bidirectional radio is activatable. Defined switch-off on power failure. Can be controlled by a conventional switch (separate inputs for direction or bridged for universal control).
Accessories and Components
A variety of accessories to complement and enhance Eltako wireless systems.
Terminal Blocks and Protection
- STS14: Terminal block set for Series 14, includes 7 parts.
- WET.PROTECT WP50: A 50ml spray offering high-performance protection against moisture, dampness, and corrosion. It creates a water-repellent film with high dielectric strength (200 kV/mm) and is saltwater resistant, making it ideal for protecting wireless switches in outdoor or harsh environments.
- FPP12: Wireless Powernet Phase Coupler: Used for capacitive coupling between two different mains conductors. Features a standby loss of only 0.2W. It is a rail-mountable device (DIN-EN 60715 TH35) and increases capacitive coupling when conductors are not run parallel for several meters. Must be connected on the input side of circuit breakers.
Wireless MP3 Player
Product: FMP3 Wireless MP3 Player
Description: Plays MP3 files, including music, sounds, and noises. Features an internal speaker, USB port, micro-USB port, a 3.5mm headphone jack, and a 3.5mm external speaker jack.
Features:
- White plastic housing (165x70x35mm) with slots for wall mounting and plastic feet for tabletop placement. Weighs 230 grams.
- Includes a USB stick with MP3 files, a 5V plug-in power supply with micro-USB cable, and a 3.5mm jack with screw terminals for external speaker connection.
- Can learn up to 120 sensors (e.g., wireless switches, door/window contacts, motion sensors).
- Allows recall of up to 50 different tracks.
- Recommended sources for sounds: www.salamisound.de and www.audiyou.de.
- Applications: Doorbell with custom tones, acoustic alerts for doors/cabinets, motion detection alerts, and confirmation of various Eltako wireless events.
EnOcean-KNX Gateways
Connect EnOcean wireless devices to KNX systems with these bidirectional gateways.
KNX ENO 626: EnOcean-KNX Gateway
Description: A secure, bidirectional gateway between EnOcean wireless and the KNX bus, offering 8 channels. Designed for flush mounting (UP-Montage) by Weinzierl.
Features:
- Transfers commands and measurements from EnOcean sensors to the KNX bus, enabling control of KNX actuators.
- Allows EnOcean actuators to be controlled via KNX.
- Supports encrypted wireless communication with security-enabled EnOcean devices.
- Compatible with over 100 EnOcean Equipment Profiles (EEP).
- Facilitates simple and secure integration of EnOcean sensors and actuators into KNX installations.
- Includes logic and control functions, and acts as a wireless repeater.
- Configuration is done using the KNX ENO-Tool (downloadable from weinzierl.de).
- Designed for installation in a 55mm flush-mounted box.
- The repeater function helps bridge longer distances between sensors and actuators. It operates as a 1-level repeater.
KNX ENO 636: EnOcean-KNX Gateway
Description: A secure, bidirectional gateway between EnOcean wireless and the KNX bus, offering 32 channels. Dimensions: 81x81x25mm. Designed for surface mounting by Weinzierl.
Features:
- Similar functionality to the KNX ENO 626, but with 32 channels for greater capacity.
- Supports encrypted wireless communication and integration of a wider range of EnOcean devices.
- Includes logic, control functions, and acts as a wireless repeater.
- Configuration via the KNX ENO-Tool.
- Surface mounting over a 55mm flush-mounted box.
- Powered via the KNX bus.
- Operates as a 1-level repeater.
Wireless Signal Strength Meter
Product: P10 Wireless Signal Strength Meter Probare
Description: A portable meter that displays the signal strength of received EnOcean telegrams in the 868 MHz range. It is used to determine optimal installation locations for EnOcean transmitters, receivers, and repeaters, and to verify transmission functions.
Features:
- Requires 2x AA/LR06 batteries (not included).
- Operates via an ON/OFF button.
- Signal strength is indicated by an LED bar.
- The MODE button allows selection of operation modes: 'All' (displays signal strength of all EnOcean transmitters), 'Filter' (displays signal strength of a single EnOcean transmitter), 'Repeater' (for temporary commissioning of a repeater to determine optimal placement), and 'Radio Link Test' (for standardized range testing or cyclic transmission of EnOcean telegrams).
EnOcean Energy Generator Wireless Switch Inserts
Product: FTE Wireless Switch Inserts
Description: These inserts, featuring EnOcean energy generators, are designed for use with wireless switches from other manufacturers. They generate the necessary energy for wireless telegrams directly from button presses, eliminating the need for power supply lines and standby losses.
Features:
- Includes a mounting plate and a mounting frame for FT55, compatible with EnOcean module PTM215 (encrytable) or PTM215B (Bluetooth).
- A single rocker can send two distinct signals; a double rocker can send four signals.
- Compatible with FT55 rocker and double rocker versions (W-FT55 and DW-FT55), including laser-engraved options.
- FTE215: EnOcean Wireless Switch Insert, encrytable.
- FTE215BLE: Bluetooth Wireless Switch Insert.
Wireless Repeaters
Extend the range and reliability of your wireless network with these repeaters.
FRP61-230V: Wireless Repeater
Description: A 1- and 2-level wireless repeater with a standby loss of only 0.7W. Designed for flush mounting (45x45x18mm).
Features:
- Operates on 230V supply.
- Required when building conditions hinder reception or the distance between transmitter and receiver is too great.
- 1-Level Mode (Default): Receives, checks, and retransmits wireless signals from sensors. Ignores signals from other repeaters to reduce data load.
- 2-Level Mode: Activated via a rotary switch. Processes signals from sensors and other 1-level repeaters. A signal can be received and amplified up to two times.
- An LED indicates incoming wireless signals.
- Repeaters do not require learning; they receive and amplify signals from all wireless sensors within their range.
FSRP-230V: Wireless Socket Repeater
Description: A 1- and 2-level wireless repeater designed as a plug-in device for sockets. Features a standby loss of only 0.7W and functions as a Smart Home Repeater.
Features:
- Plug-in device for German protective contact sockets with increased touch protection. The 16A socket is directly connected to the plug, so no socket is blocked.
- Required when building conditions hinder reception or the distance between sensor and actuator is too great.
- 2-Level Mode (Default): Processes signals from sensors and other 1-level repeaters. A signal can be received and amplified up to two times.
- 1-Level Mode Activation: Achieved by unplugging and plugging the device back in 3 times within 10 seconds. In this mode, only signals from sensors are received and amplified, ignoring other repeaters.
- 2-Level Mode Activation: Achieved by unplugging and plugging the device back in 5 times within 20 seconds.
- Repeaters do not require learning; they receive and amplify signals from all wireless sensors within their range.
FRP70-230V: Wireless Repeater
Description: A 1- and 2-level wireless repeater with a small antenna. Standby loss of only 0.6W. Can optionally connect to the FA250 wireless antenna.
Features:
- Designed for mounting in 230V mains supply lines, e.g., in suspended ceilings.
- Used when building conditions hinder reception or the distance between transmitter and receiver is too great.
- The FA250 antenna (250cm cable) can be connected for improved range.
- 1-Level Mode (Default): Receives, checks, and retransmits wireless signals from sensors. Ignores signals from other repeaters.
- 2-Level Mode: Activated via a rotary switch. Processes signals from sensors and other 1-level repeaters, amplifying signals up to two times.
- An LED indicates incoming wireless signals.
- Repeaters do not require learning.
- FA250: Wireless antenna with 250cm cable (available in black or light grey).
FRP65/230V-wg: Wireless Repeater
Description: A 2-level wireless repeater housed for single mounting or installation within E-Design65 switch systems (84x84x30mm). Standby loss of only 0.8W.
Features:
- Recommended for screw mounting onto 55mm switch boxes using stainless steel countersunk screws (2.9x25mm).
- Operates on 230V supply.
- Required when building conditions hinder reception or the distance between transmitter and receiver is too great.
- Always operates in 2-level mode, processing signals from sensors and other 1-level repeaters.
- Repeaters do not require learning.
Outdoor Wireless Repeater
FARP60-230V: Outdoor Wireless Repeater
Description: A 1- and 2-level outdoor wireless repeater (60x46x30mm) with a standby loss of only 0.7W.
Features:
- Operates on 230V supply.
- Used when building conditions hinder reception or the distance between transmitter and receiver is too great.
- 1-Level Mode (Default): Receives, checks, and retransmits wireless signals from sensors and actuators. Ignores signals from other repeaters.
- 2-Level Mode: Activated by moving a jumper after removing the cover. Processes signals from sensors and other 1-level repeaters, amplifying signals up to two times.
- A red LED indicates all received wireless signals.
- Repeaters do not require learning.
- Features an M12 screw connection for waterproof mains connection.
- IP54 protection rating.
- Operating temperature range: -20°C to +55°C.
- Mounting is done by screwing.
Wireless Transmitter Modules
Modules for sending wireless signals for various applications.
FSM60B: Wireless Transmitter Module with Battery
Description: A wireless transmitter module with battery and antenna rod (60x46x30mm, excluding antenna and connection). It can be triggered by a water sensor (FWS60) or a switch to send various adjustable wireless telegrams within the Eltako building wireless system.
Features:
- Four operating modes selectable via an internal jumper:
- Mode 1: Sends telegrams similar to a 'double rocker bottom left press' of a wireless switch.
- Mode 2: Sends telegrams similar to a 'double rocker top right and bottom right press'.
- Mode 3 (Factory setting): Sends telegrams according to EnOcean standard EEP A5-30-03.
- Mode 4: Sends telegrams according to EnOcean standard EEP A5-30-01.
- In modes 3 and 4, a status telegram is sent every 33 minutes.
- Powered by an internal 3V button cell (CR2032) for multi-year operation. Battery charge status is included in data and status telegrams in Mode 4.
- The internal LRN button is pressed to learn the module into a learning-enabled actuator.
- Requires removal of cover screws to access internal components.
- Features an M12 screw connection for cable entry.
- Multiple wireless transmitter modules should not be controlled simultaneously.
FASM60-UC: Outdoor Wireless Transmitter Module
Description: A 2-channel outdoor wireless transmitter module (60x46x30mm, excluding connection) with an internal antenna. It has no standby loss.
Features:
- Can send wireless telegrams to the Eltako building wireless system, similar to a wireless switch. Channel A1 corresponds to a 'rocker top press', and A3 to a 'rocker bottom press'. Releasing the control contacts sends the same telegram as 'wireless switch released'.
- No standby loss. Wireless telegrams can be encrypted.
- The internal rotary switch is used for activating/deactivating encryption.
- Requires removal of cover screws to access internal components.
- Connects to an internal 5-pin terminal block for control inputs (+A1/-A2 and +A3/-A2).
- If terminals A1 and A3 are bridged, a wireless telegram from A3 is sent once per minute as long as the control voltage is present (e.g., for central commands with priority).
- Universal control voltage accepts commands from 8 to 253V AC or 10 to 230V DC with a duration of at least 0.2 seconds.
- Maximum parallel capacity for single control lines is 3nF (approx. 10 meters) at 230V. For common control lines, it's 0.5nF (approx. 2 meters). For 12-24V UC, capacity is 0.03µF (approx. 100 meters).
- Encryption activation/deactivation is done via the rotary switch.
Wireless Antennas
Enhance signal reception and transmission with these specialized antennas.
Wireless Antennas FA250, FHM175, and FA200
- FA250: Wireless Antenna with Magnetic Base and 250cm Cable (Black/Light Grey): This antenna can replace the small built-in antennas of wireless modules and transmitters, especially for reception/transmission within metal control cabinets. It attaches externally via a magnetic base, with the 250cm cable routed internally. Optimal performance is achieved when the magnetic base adheres to a metal surface, such as the FHM175 HF mass. The transmission and reception range is nearly spherical around the antenna. Antenna height is 10cm. Features SMA screw connection. Can be extended by 5m using FAV5 or 10m using FAV10 extension cables.
- FHM175: HF Mass for FA250: An anodized aluminum disc (4mm thick, 175mm diameter) that optimizes the transmission and reception performance of the FA250 antenna. Its diameter is twice the antenna length plus its rod diameter. A recessed steel disc in the center accommodates the magnetic base of the FA250 for precise centering. The aluminum disc includes a hole and a slot for wall mounting.
- FA200: High-Performance Reception Antenna with Magnetic Base and 200cm Cable: This antenna offers a radial gain of up to 7 dBi, providing significantly greater range than the FA250 antenna. Reception performance along the antenna axis is lower. It should only be used as a reception antenna. Antenna height is 59cm. Features SMA screw connection. Can be extended by 5m using FAV5 or 10m using FAV10 extension cables.
- FAV5/FAV10: Antenna Extension Cables: 5m or 10m extension cables for wireless antennas.
Wireless Antenna FAG65-wg
Product: FAG65-wg Wireless Antenna
Description: An antenna housed for single mounting or installation within E-Design switch systems (84x84x30mm) with a 100cm cable.
Features:
- Recommended for screw mounting onto 55mm switch boxes using stainless steel countersunk screws (2.9x25mm).
- The housing contains a wireless antenna with a ground plane and a permanently attached antenna cable (approx. 100cm) with an SMA screw connection.
Spacer DS12
Description: A spacer (0.5 division unit = 9mm wide) used to create and maintain ventilation clearance for flush-mounted devices that generate significant heat, such as dimmers above 300W/400W or continuously switched electromechanical impulse switches.
Socket ST12-16A
Description: A 16A flush-mountable socket designed as a rail-mountable device for DIN-EN 60715 TH35 rails and surface mounting. It occupies 2.5 division units (45mm wide, 55mm deep).
Universal Mounting Plate U2RP
Description: A universal 2-position mounting plate for installing 1 or 2 devices from series 61, 62, and 64 into distribution boards and control cabinets onto DIN-EN 60715 TH35 rails. Features pre-mounted adhesive pads for attachment, with additional cable ties possible for secure mounting.
Mounting Accessories and Components
Essential accessories for installation and system configuration.
Mounting Frame and Fasteners
- HP+BF: Mounting Plate with Frame: A mounting plate with a frame for EnOcean modules (e.g., PTM..), used with switches like FT55, F2T55E, F4T55E, and FS55E.
- S+D25: Screws and Dowels: A pack of 25 screws and dowels for securely mounting wireless switch holder plates. Also suitable for mounting onto surface-mounted (UP) boxes. Includes 25 countersunk sheet metal screws (2.9x25mm, Stainless Steel A2) and 25 Fischer wall plugs (SX5, 25mm long). The screw head fits precisely between the switch plate and the Eltako frame. The screws are also suitable for mounting into existing screw sleeves in UP switch boxes.
RC Circuit RC12-230V
Description: A 3-fold RC circuit designed for rail mounting (DIN-EN 60715 TH35). It occupies 1 division unit (18mm wide, 58mm deep).
Features:
- Used for compensating inductive interference voltages on control lines.
- Allows up to three switching devices to be filtered by parallel connection to their 230V control inputs.
Housing GBA14
Description: A flush-mountable housing for installation instructions, designed for rail mounting (DIN-EN 60715 TH35). It occupies 1 division unit (18mm wide, 55mm deep). The housing is supplied without a front plate, allowing for the insertion of instruction manuals.
