Mi Smart LED Desk Lamp 1S User Manual
Product Overview
Thank you for choosing the Mi Smart LED Desk Lamp 1S. This lamp is equipped with high-quality LEDs and features a professional optical design using a natural light mixing algorithm to deliver a uniform lighting experience.
This lamp is intended for use in studies, bedrooms, and other indoor areas. Under normal usage conditions, the lamp should be positioned so that the direction of the lamp head (indicated by points A and B) is parallel to the desktop. When the light emitting surface is level, the vertical distance between it and the desktop is 400 mm.
Diagram Description: A line drawing depicts the Mi Smart LED Desk Lamp. The lamp arm is extended horizontally. A cone of light emanates from the lamp head, illuminating a stack of books placed on a desk. Points A and B indicate the direction of the lamp head. Text indicates a "Recommended Max. Height: 400 mm".
Using the Lamp
Connect to Power Supply
Plug the power cable into the charging port at the base and connect the adapter to a power supply.
Diagram Description: A line drawing shows the lamp's structure. It highlights the "Lamp Body", the "Charging Port" at the base, and an "Adjustment Knob" on the base. An arc indicates the "135° Adjustable Angle". A separate illustration shows the "LED Driver (Adapter)" connected to a power cord.
Connect with Mi Home / Xiaomi Home App
This product works with the Mi Home / Xiaomi Home app. Control your device and interact with other smart home devices through the app.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Alternatively, search "Mi Home / Xiaomi Home" in your device's app store to download and install it. Open the Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow the prompts to add your device.
Note: The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Smart Control
Apple HomeKit
1. Open the Home app on your iPhone or iPad.
2. Tap "Add Accessories" and follow the instructions in the app to scan the QR code on the product base, or enter the 8-digit setup code above the QR code to grant the Apple Home app access.
* Make sure a Wi-Fi network with Internet access is available (this product does not support 5GHz Wi-Fi networks).
To control this HomeKit-compatible accessory, it is recommended that you use iOS 9.0 or above.
The HomeKit setup code is listed on the product base; do not lose it. After restoring factory settings, you will need the HomeKit setup code again to add the accessory. iPad and iPhone are the trademarks of Apple Inc., and they are registered in the United States and other countries.
Google Assistant
Add the Mi Home / Xiaomi Home service to the Google Assistant app to control devices connected to Mi Home / Xiaomi Home from Google Assistant.
1. Tap in the Google Assistant app, search for "Mi Home / Xiaomi Home", tap "Link", and sign in with your Xiaomi account.
2. Tap in Settings > Home control to add a device, and follow the on-screen instructions. Once the accounts are linked, you can control the Lamp from Google Assistant.
Amazon Alexa
Add the Mi Home / Xiaomi Home skill to the Amazon Alexa app to control devices connected to Mi Home / Xiaomi Home from Amazon Alexa.
1. Tap in the Amazon Alexa app, then tap "Skills & Games", search for "Mi Home / Xiaomi Home", select the correct skill and tap "Enable". Then sign in with your Xiaomi account.
2. After successfully linking the accounts, tap DISCOVER DEVICES to add the device, and follow the on-screen instructions. Once the accounts are linked, you can control the Lamp from Amazon Alexa.
Note: The name (Mi Home or Xiaomi Home) varies by selected language or regions.
Factory Reset
The Reset hole is at the bottom of the lamp base. When powered on, insert a straightened tool into the hole for 5 seconds, and let go when the lamp starts to breathe. The Reset completes when the breathing stops.
Diagram Description: A close-up view of the lamp's base shows a small hole labeled "Reset hole". An illustration shows a thin object being inserted into the hole.
* Factory Reset is required in a new network environment to reconnect the network.
Specifications
| Property | Value |
|---|---|
| Model | MJTD01SYL |
| Operating Temperature | -10°C to 35°C |
| Operating Humidity | 0–85% RH |
| Service Life | Approx. 25000 h |
| Color Rendering Index | Ra90 |
| Power Factor | 0.5 |
| Bedside Lamp Input | 12 V 0.8A |
| Rated Power | 9 W (Lamp + LED Driver) |
| Rated Input | 220–240 V~50/60 Hz 0.45 A |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
| Compatible with | Android 4.4 or iOS 9.0 and above |
| Operating Frequency (Wi-Fi) | 2412–2472 MHz |
| Operating Frequency (BT) | 2402–2480 MHz |
| Maximum Output Power (Wi-Fi) | 17.70 dBm |
| Maximum Output Power (BT) | 4.19 dBm |
Product Features
- ? Color Temperature Adjustment
- ? Brightness Adjustment
- ✨ Flicker Free
- ? Low Blue Light Content
- ⏰ Scheduled On/Off
- ? Foldable Design
- ? 135° Adjustable Angle
- ? High Color Rendering Index
- ? Reading Mode
- ? PC Mode
- ? Child Mode
- ? Focus Mode
- ? Mi Home/Xiaomi Home App*
- ? HomeKit Control
- ⏳ Turn-off Delay
- ⬆️ Firmware Update
Safety Precautions
- Suitability for use "indoors"; the related ambient temperature is 35℃.
- Please use the power resource correctly.
- If in any doubt, consult a qualified electrician.
- Do not put the luminaire on an inclined plane.
- ? For household use only.
- ? Class III Luminaire.
- If the power cord is damaged, it must be replaced by the manufacturer or a qualified service engineer to avoid any risks to safety.
- For non-user replaceable light sources: "The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person."
- Do not disassemble the product. The light-emitting diode may cause damage to your eyes.
- A minimum separation distance of 0 cm must be maintained between the user's body and the device to comply with the RF exposure requirements in Europe.
- The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device is 0.494 W/kg.
Declarations
EU Declaration of Conformity
✅ Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the radio equipment type MJTD01SYL is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.mi.com/en/service/support/declaration.html.
WEEE Disposal and Recycling
♻️ All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Manufacturer Information
Entrusted by: Xiaomi Communications Co., Ltd.
Manufactured by: Qingdao Yeelink Information Technology Co., Ltd. (a Mi Ecosystem company)
Address: 10F-B4, Building B, Qingdao International Innovation Park, No.1 Keyuan Weiyi Road, Laoshan District, Qingdao City, Shandong Province, P.R.China
Manufacturer Phone: +86 400 619 7969
Country of Origin: China
(Information for Hong Kong market)
Service Phone: 852-30773620
For after-sales service, please visit: www.mi.com/hk/service
For further information, please go to: www.mi.com
Document Version: V3.0
Xiaomi United States | Xiaomi Official Website
