Delta In2ition® 5-Setting Two-in-One Shower
Models: 58620-A-PK & 58620-25-PK
See what Delta can do
Register Online
Register your product online to access additional technical documents and product information.
Replacement Parts and Technical Documents
To reference replacement parts and access additional technical documents and product info, visit:
For service parts, call: 1-800-345-DELTA (3358)
Installation Instructions
[?] Read all instructions prior to installation.
CAUTION: Failure to read these instructions prior to installation may result in personal injury, property damage, or product failure. Delta assumes no responsibility for product failure due to improper installation.
Step A: Attaching the Shower Head
Verify there is a gasket (1) in the shower head (2). Hand tighten the shower head onto the existing shower arm (3).
Notice: Removal of or tampering with the flow restrictor may result in shower head failure and will void the warranty.
Step B: Connecting the Hose
Place the hose gaskets (1) into the hose nuts on each end of the hose (2). Connect one end of the hose to the shower head and the other end to the hand shower. All connections should be made by hand tightening.
Step C: Combining Showers and Changing Spray Modes
To combine the two showers, align the hand shower (1) with the recess in the bottom of the shower head (2). Dock the hand shower into the shower head until the two snap together.
To change spray modes:
- On the shower head: Rotate the lever (3) to change spray modes. You can cycle through shower head only, shower head (full body spray) and hand shower, or hand shower only.
- On the hand shower: Press the button (4) to cycle through to the desired setting.
Tools You May Need
The following items may be helpful for installation:
- Safety glasses
- Wrench (for removal of existing shower head)