Eaton SMART750USB Tripp Lite SmartPro UPS

The Eaton SMART750USB, part of the Tripp Lite Series, is an interactive UPS offering 120V, 750VA, and 450W power capacity. It features Automatic Voltage Regulation (AVR), a tower design, USB connectivity, and surge-protected outlets, providing reliable backup power and protection against voltage fluctuations and power surges.

Key Features

Interactive UPS: Provides voltage regulation (AVR) and extended battery support, along with comprehensive AC surge suppression for telephone/DSL/Ethernet lines.
Runtime: Supports basic PC systems for up to 45 minutes during power outages, allowing for safe system shutdown. It can handle a maximum load of 750VA / 450 Watts for 2.2 minutes and a medium load of 375VA / 225 Watts for 8.3 minutes.
Voltage Regulation: Automatic Voltage Regulation (AVR) circuits correct voltage drops as low as 89V without using battery power. Input voltages between 89V and 104V are boosted by 14%.
Design: Features an attractive black tower form factor.
Outlets: Includes 3 battery-supported outlets and 3 additional outlets for surge suppression only. It has a 6 ft (1.8 m) AC power cord with NEMA 5-15P input and NEMA 5-15R outlets.
USB Connectivity: The USB port enables unattended shutdown and data saving during prolonged power failures when used with Tripp Lite's PowerAlert software, available for free download at www.tripplite.com/poweralert.
WatchDog Software Support: Supports Tripp Lite's WatchDog software for automatically resetting non-responsive programs and rebooting completely locked-up computers by cycling UPS power.
Data Line Protection: Built-in data line connectors protect a dial-up telephone/DSL line or an Ethernet connection.
Audible Alarm & LEDs: An audible alarm and 4 front-panel LEDs indicate UPS system status and line power conditions (line power, battery power, overload, and low/replace battery).
Power Capacity: The 750VA / 450-watt power handling capacity supports a variety of home electronics, computing, telecommunications, and network equipment.
Battery Replacement: The battery can be replaced via the built-in access panel.
Compatibility: Compatible with 120V / 60Hz applications for the USA, Canada, Mexico, and more.
Connected Equipment Insurance: Offers a $200,000 Maximum Lifetime Insurance policy (for USA, Puerto Rico, and Canada).

Specifications

General

UPC Code: 037332119940
UPS Type: Interactive

Input

Input Phase: Single Phase
Input Current Rating (Max Load): 12A
Input Voltage(s): 120V AC
Input Connection: NEMA 5-15P (Right Angle)
Power Cord Length: 6 ft (1.8 m)
Recommended Electrical Service: 15A, 120V
Maximum Input Amps: 12

Output

Output Capacity (VA): 750
Output Capacity (kVA): 0.75
Output Capacity (Watts): 450
Output Capacity (kW): 0.45
Nominal Voltage Details: 115V nominal output on battery backup
Frequency Compatibility: 60 Hz
Voltage Regulation (Battery Mode): +/- 5%
Output Receptacles: 3 UPS-supported, 3 surge-only
AC Output Waveform (Line Mode): Sine wave
AC Output Waveform (Battery Mode): PWM Sine wave
Output Voltage(s): 110V, 115V, 120V
Receptacles: (6) 5-15R
Individually Controllable Load Banks: No

Battery

Battery Type: Valve Regulated Lead Acid (VRLA)
Runtime at Full Load: 2.2 minutes
Runtime at Half Load: 8.3 minutes
Expandable Runtime: No
System DC Voltage: 12V
Battery Recharge Rate: Less than 4.5 hours from 10% to 90% (batteries included)
Battery Access: Battery access door
Replacement Battery Cartridge: RBC51 (compatible with APC, Belkin, Best Powerware, Liebert, and other Tripp Lite UPSs)
Battery Replacement Description: Batteries can be hot-swapped and are user-replaceable.

Voltage Regulation

Description: Automatic Voltage Regulation (AVR) maintains line-compatible operation with input voltages as low as 89V. Input voltages between 89V and 104V are boosted by 14%.

User Interface, Alerts & Controls

Switches: 2 switches control power on/off state and alarm cancellation/self-test operation.
Alarm Cancellation: The power failure alarm can be silenced using the alarm cancel switch; once silenced, the alarm will sound again to indicate a low battery condition.
Audible Alarm: The audible alarm indicates power failure and low battery conditions.
LED Indicators: 4 LEDs indicate line power status, battery power status, overload, and low/replace battery.

Surge Suppression / Noise Filtering

UPS Data Line Suppression: 1-line Tel/DSL (1 in / 1 out); 10/100Base T Ethernet protection.
AC EMI/RFI Noise Suppression: Yes
AC Suppression Rating (Joules): 510 Joules
AC Suppression Response Time: Instantaneous

Physical

Primary Form Factor: Tower
Supported Installation Form Factors: Tower (optional wall-mount kit available: UPSWM)
Primary UPS Dimensions (mm): 191 (Depth) x 274 (Height) x 132 (Width)
Shipping Dimensions (in): 13.98 x 8.27 x 10.43 (H x W x D)
Shipping Dimensions (cm): 35.51 x 21.01 x 26.49 (H x W x D)
Shipping Weight (lb): 17.15
Shipping Weight (kg): 7.78
UPS Cabinet Material: PVC
Power Module Dimensions (cm): 27.43 x 13.21 x 19.05 (H x W x D)
Power Module Dimensions (in): 10.8 x 5.2 x 7.5 (H x W x D)
Power Module Weight (kg): 9.07
Power Module Weight (lb): 20
Unit Weight (lb): 15.00
Unit Weight (kg): 6.80

Environmental

Operating Temperature Range: +32°F to +104°F / 0°C to +40°C
Storage Temperature Range: +5°F to +122°F / -15°C to +50°C
Relative Humidity: 0 to 95% (non-condensing)
AC Mode BTU/Hr. (Full Load): 38
AC Mode Efficiency (100% Load): 97%
Thermal Dissipation (BTU/Hr) at Full Load (Battery Mode): 512

Communications

PowerAlert Software: For local monitoring via the UPS's built-in USB port. Download PowerAlert Local software at http://www.tripplite.com/poweralert
Communications Cable: USB interface cable included.
WatchDog Compatibility: Supports Watchdog application, OS reboot options, or remote shutdown/reboot for remote applications.
Network Management Card Description: Not supported.
Communications Interface: USB (HID compliant)

Line / Battery Transfer Time

Transfer Time: 2 to 4 milliseconds
Low Voltage Transfer to Battery (Calibration): 89V
High Voltage Transfer to Battery (Calibration): 139V

Characteristics/Specifications

Cold Start: Supports cold start operation (startup in battery mode during a power failure).
High Availability UPS Functions: Automatic Voltage Regulation (AVR); Hot-Swap Batteries; Surge/noise protection.
Eco-Saving Features: Over 95% efficiency - ECO-FRIENDLY UPS.

Applications

UPS Applications: Home/Office Desktop; Retail/Point of Sale; Hospitality.

Standards & Compatibility

Product Certifications: CSA (Canada); NOM (Mexico); UL 1778
Product Compliance: RoHS; FCC Part 15 Class B (USA)

Warranty & Support

Product Warranty Period (USA & Canada): Limited 3-year warranty.
Product Warranty Period (Latin America): Limited 3-year warranty.
Product Warranty Period (International): Limited 2-year warranty.
Product Warranty Period (Mexico): Limited 3-year warranty.
Connected Equipment Insurance (USA, Puerto Rico & Canada): $200,000 Maximum Lifetime Insurance policy.

Eaton Corporation
1000 Eaton Boulevard
Cleveland, OH 44122
United States
https://tripplite.eaton.com

	Eaton SmartPro 1000VA UPS: Reliable Power Protection for Servers and Networks Discover the Eaton SmartPro 1000VA UPS (SMART1000RM2ULN) with 6 outlets and a preinstalled WEBCARDLXE network interface. This line-interactive sine wave UPS offers advanced features like LiFePO4 battery backup, automatic voltage regulation, and remote management, ensuring stable power for critical IT equipment in data centers and server rooms.
	Eaton 5P1150I UPS: 1150 VA, 770 W - Product Specifications and Features Detailed specifications for the Eaton 5P1150I Uninterruptible Power Supply (UPS). Features include 1150 VA/770 W capacity, line-interactive topology, sine wave output, 8 C13 receptacles, and advanced battery management. Includes information on general specifications, product details, compliances, certifications, resources, and technical data.
	Eaton UPS and Power Management Fundamentals Handbook A comprehensive guide to understanding and selecting Uninterruptible Power Supply (UPS) systems and power management solutions from Eaton. This handbook covers essential topics such as UPS design considerations, system components, compatibility, performance, industry-specific solutions, and service. It provides practical advice for planning and implementing reliable power protection for various environments, from small offices to large data centers.
	Eaton Ellipse ECO UPS: Efficient Power Protection for Home and Business Discover the Eaton Ellipse ECO line of single-phase Uninterruptible Power Supplies (UPS). Learn about their energy-efficient offline technology, easy integration, and comprehensive protection for PCs, workstations, and home/business computers.
	Eaton 5P650IR UPS Technical Specifications Detailed technical specifications for the Eaton 5P650IR Uninterruptible Power Supply (UPS), covering electrical, battery, communication, environmental, and additional features.
	Eaton 9PX UPS: High-Efficiency Power Protection (1-3 kVA) Discover the Eaton 9PX UPS, offering high-efficiency, reliable power protection for IT infrastructure, data centers, and industrial applications. Features include Energy Star certification, online double-conversion topology, and flexible rack/tower deployment.
	Eaton 5E650IUSB UPS: Comprehensive Specifications and Features Detailed specifications for the Eaton 5E650IUSB Uninterruptible Power Supply (UPS), including power, voltage, connectivity, and operational features. Learn about its compact design, AVR technology, and USB compatibility.
	New Eaton 5E UPS Offers Essential Protection at Affordable Price Eaton introduces the new 5E range of uninterruptible power supplies (UPSs), offering reliable power protection at a cost-effective price. These UPSs are compact, easy to install, and suitable for protecting PCs, workstations, and other IT equipment.