Hotpoint HTX8017DNF2 Induction Hob
Model: HTX8017DNF2
12NC: F168742
EAN Code: 8050147687420
Product Overview
This document provides the technical specifications for the Hotpoint HTX8017DNF2 induction hob. The appliance is a built-in, vitroceramic hob with electronic controls.
Visual Description: The hob is black and features four cooking zones, typical of modern induction cooktops.
Main Characteristics
| Characteristic | Specification |
|---|---|
| Product line | Hob |
| Product construction type | Built-in |
| Control type | Electronic |
| Type of control devices and signalling | - |
| Number of gas burners | 0 |
| Number of electric cooking points | 5 |
| Number of electric plates | 0 |
| Number of radiant plates | 0 |
| Number of halogen plates | 0 |
| Number of induction plates | 5 |
| Number of electric warming plates | 0 |
| Control panel location | Front |
| Main surface material | Vitroceramic |
| Main colour | Black |
| Nominal electrical connection data | 11100 |
| Nominal gas connection data | 0 |
| Type of gas | Not available |
| Current | 48 |
| Voltage | 220-240 |
| Frequency | 50/60 |
| Length of the electrical supply cable | 150 |
| Type of plug | No |
| Gas connection | Not available |
| Product width | 800 |
| Product height | 54 |
| Product depth | 510 |
| Minimum niche height | 28 |
| Minimum niche width | 750 |
| Niche depth | 490 |
| Net weight | 16.25 |
| Automatic programs | Yes |
Technical Specifications
| Specification | Detail |
|---|---|
| Power on indicator | Yes |
| Hot plate indicator | 5 |
| Type of regulation | Induction |
| Type of cover | None |
| Residual heat indicator | Separate |
| Main on/off switch | Yes |
| Safety device | Yes |
| Electronic timer | Yes |
Performance
| Aspect | Type |
|---|---|
| Operation | Electric |
Dimensions Diagram Description
The diagram illustrates the installation requirements for the built-in hob. It specifies the overall product dimensions: width 800mm, height 54mm, and depth 510mm. The required niche dimensions for installation are: minimum width of 750mm, minimum depth of 490mm, and a height of 28mm.
