Duravit Bathtub Installation Guide

Waste and Overflow System

About This Document

All documents related to this product and further information are available online. Access online documents at qr.duravit.com or www.duravit.com.

Safety

Purpose of the Document

The instructions are part of the Duravit product. Failure to follow the instructions may result in personal injury, product damage, and/or property damage.

Read and follow the instructions.
Keep this document and pass it on to subsequent users.

Duravit reserves the right to make technical improvements and visual changes to the products illustrated.

Target Readership and Qualifications

Installation may only be undertaken by plumbers.

Plumbers are persons with appropriate technical training, knowledge, and experience to recognize and avoid dangers and risks during sanitary area installation.
Plumbers are qualified to select and use suitable protective equipment.
Plumbers are familiar with and observe local utility company installation regulations and country-specific standards.

Avoiding Damage

Product and/or Property Damage

Breach of local and country-specific regulations and standards can cause damage to the product and/or property.

Observe local installation regulations and country-specific standards at all times.

Requirements at the Installation Location

Pre-installation must be carried out properly.

Access the pre-installation data sheet at qr.duravit.com or www.duravit.com.

Mounting Instructions

13. Mounting the Cable-Driven Waste and Overflow

For mounting a waste and overflow system with a bath spout or base inlet, the connecting hose #790159/#790166 is recommended.

Diagram description: Illustrates the waste and overflow assembly, highlighting the connection hose (#790159/#790166) for bath spout or floor inlet installation.

28. Providing for an Inspection Hatch

Provide for an inspection hatch in the area of the waste fitting.

Dimensions of the inspection hatch: minimum 20 x 20 cm / 50-50".

Diagram description: Shows the location for an inspection hatch to be created near the waste fitting, with specified minimum dimensions.

35. Close the Inspection Hatch

Seal the inspection hatch against spray water.

The inspection hatch may only be opened with a tool.

Diagram description: Depicts the process of sealing the inspection hatch to protect against water spray and indicates that a tool is required for opening.

	Duravit D-Code Bathtub: Specifications and Details \| Model 700095000000090/700095000000092 Detailed specifications, dimensions, and accessories for the Duravit D-Code Bathtub. Features include sanitary acrylic construction, drop-in installation, and a capacity of 25 gallons. Includes order numbers for bathtub and related parts.
	Duravit No.1 Alcove Tub - Product Specifications and Accessories Detailed specifications and suitable products for the Duravit No.1 alcove tub, including dimensions, material, installation type, and order numbers for related accessories.
	Duravit D-Code Bathtub: Specifications and Accessories Detailed specifications for the Duravit D-Code Bathtub, including dimensions, materials, variants, and compatible accessories. Features include drop-in installation, sanitary acrylic material, and cUPC listing.
	Duravit Freestanding Bathtub Mounting Instructions Comprehensive installation guide for Duravit freestanding bathtubs. Includes model numbers, safety warnings, required qualifications, and step-by-step mounting procedures with textual descriptions of diagrams.
	Duravit Luv Bathtub - Freestanding Oval, 1800mm, Polymer Cast - Model 700434000000000 Discover the Duravit Luv Bathtub, a luxurious freestanding oval bathtub crafted from durable DuroCast Plus Polymer Cast. This seamless white matt model (1800 x 850 mm) features integrated waste and overflow, a 252-liter capacity, and an internal depth of 460 mm. Includes compatible accessories.
	DuraSquare Bathtub - Product Specifications and Dimensions Detailed specifications and dimensions for the Duravit DuraSquare Bathtub, including material, installation type, dimensions, weight, and color options. Features DuroCast Plus material and a seamless panel design.
	DuraSquare Bathtub - Product Specifications and Dimensions Detailed specifications and dimensions for the Duravit DuraSquare Bathtub, including material, installation type, capacity, and order number.
	Duravit No.1 Alcove Tub - Technical Specifications and Accessories Detailed specifications and compatible accessories for the Duravit No.1 alcove bathtub, including dimensions, materials, colors, and order numbers.