Caliber RMD 901DAB-CP Quick Start Guide

Product Overview

This document provides essential information for the installation and use of the Caliber RMD 901DAB-CP car radio. It includes specifications, connection diagrams, and operational instructions.

Specifications

General:

• Power supply: 12V DC, negative ground
• Max power output: 4 x 100W channels
• Speaker impedance: 4-8 ohm
• Fuse: 15A
• Dimensions (WxHxD): 184 x 104 x 150mm

TFT LCD:

• Display resolution: 1024(W) x 600(H)
• Display: 7" IPS Capacitive
• Video output level: 1.0 - 0.2Vp-p
• Composite load impedance: 75 ohms
• Bluetooth® range: Up to 10 meters (without barrier)

Radio:

• AM Frequency range: 531-1602 kHz
• AM sensitivity: 35 dBu
• FM Stereo Radio Frequency range: 87.5-108.0 MHz
• FM sensitivity: 18 dBu
• Stereo separation: 35dB (1 KHz)

DAB+ TUNER:

• Frequency Range: 174~240MHz
• Antenna type: Screen mount

Transmission:

• Frequency range: 2402-2480 Mhz
• Max e.r.p: <100mW/20dBm

Note: Specifications and design are subject to change without notice due to technological improvements.

Installation and Connections

DAB Antenna Installation:

The DAB antenna should be placed on the windshield near the 'A post'. The magnet should be attached to the metal of the car frame. No paint removal is necessary.

Connections:

The rear panel features various connection ports:

• USB Ports (1,2,7,8): For media playback or phone charging.
• Handbrake (3): Brown wire.
• Amplifier power (4): Blue wire.
• Front CAM power (5): Green wire.
• Rear CAM power (6): Pink wire.
• Ground (9): Black wire.

Wiring Harness:

• Ground (1): Black wire.
• ACC +12V Ignition key (2): Red wire.
• Rearview camera/Back (3): Pink wire.
• SWC-1/Key-1 (4): Orange/Black wire.
• FR Speaker - (5): Grey/Black wire.
• FR Speaker + (6): Grey wire.
• FL Speaker - (7): White/Black wire.
• FL Speaker + (8): White wire.
• Memory +12V Battery (9): Yellow wire.
• Illumination (10): Orange wire.
• SWC-2/Key-2 (11): Brown wire.
• Antenna power out (12): Blue wire.
• RL Speaker - (13): Green/Black wire.
• RL Speaker + (14): Green wire.
• RR Speaker + (15): Purple wire.
• RR Speaker - (16): Purple/Black wire.

Rear Panel Ports:

• RCAM-IN: Video input for rear camera.
• FCAM-IN: Video input for front camera.
• AUX-V: Aux Video input.
• AUX-L: Aux Audio Left input.
• AUX-R: Aux Audio Right input.
• SUB-OUT: Subwoofer output.
• V-OUT1, V-OUT2: Video outputs.
• FR, FL, RR, RL: RCA outputs for speakers.

Remote Control Functions

The remote control offers various functions, including power, mute, mode selection, navigation, music playback control, and direct number input.

Key Functions:

• Switch key (01): Power on/off.
• Mute key (02): Mute/unmute audio.
• Mode key (03): Cycle through modes.
• Menu key (04): Return to main menu or previous state.
• Video button (05): Enter video playback.
• Band key (06): Switch radio bands.
• Direction keys (07, 09, 11): Navigate menus or selections.
• Music key (08): Enter audio playback.
• Picture key (09): Enter picture playback.
• ENTER (11): Confirm selection, play/pause.
• Stop/Back key (17): Stop playback.
• AMS key (13): Automatic station scanning and preview.
• Loudness key (16): Enhance bass effect.
• Repeat key (18): Cycle repeat modes.
• Zoom (19): Zoom in on video or picture.
• Delete key (21): Delete input characters (for Bluetooth).
• Far/Close/Shuffle button (22): Radio range selection, random playback.
• SEEK-/SEEK+ (23, 24): Scan for previous/next station or track.
• Answer/Hang up keys (25, 26): Manage Bluetooth calls.
• Digital keys (27-36, 38-40): Direct track selection or dialling.
• 10+/10- (37): Skip 10 tracks forward/backward.
• Tone-/Tone+ (VOL-, VOL+) (28, 29): Adjust volume.
• Audio key (EQ) (30): Access audio settings (bass, treble, balance, loudness, EQ).
• GOTO (40): Select specific track number.

Precautions for Safe Usage

• Read the manual carefully before use.
• Do not operate functions that distract from driving. Perform such actions only when the vehicle is stopped.
• Keep volume at a level that allows you to hear external sounds. Excessive volume can be dangerous and cause hearing damage.
• Do not disassemble or modify the unit. This can cause accidents, fire, or electric shock.
• Use only in vehicles with a 12V negative ground system.
• Keep small objects like screws out of reach of children.
• Use the correct fuse rating when replacing fuses.
• Do not block vents or radiator panels to prevent overheating and fire.
• Use this product only for mobile 12V applications.
• Stop use immediately if a problem occurs to prevent injury or damage.
• Clean the product with a soft, dry cloth. Use water only for stubborn stains.
• Ensure the vehicle temperature is between 0°C and +45°C before operating the unit.
• For maintenance, return the unit to an authorized Caliber dealer.

Declaration of Conformity

Caliber declares that the RMD 901DAB-CP complies with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS).

A Declaration form can be found at: https://calibereurope.com/nlmedia/forms/DeclarationRMD901DAB-CP.pdf