Sonos Ray
The compact soundbar for music, TV, and more.
Overview
The Sonos Ray is a compact soundbar designed for music, TV, and more, offering a simple setup with just one cable to your TV. Its versatile design allows it to fit easily into various spaces, whether placed on a credenza, mounted on a wall, or situated within a TV stand. Enjoy streaming music, radio, and podcasts even when the TV is off. The Ray can be expanded to support 5.1 surround sound by adding a Sub and two Sonos speakers, like Ones. Control your Sonos system using the Sonos app, available for Android and iOS. Refer to the "Setup" section for adding Ray to your Sonos system.
Key Features:
- Quick and easy setup with a single cable connection to your TV.
- Great sound for compact spaces with a versatile design.
- Stream music, radio, and podcasts independently of the TV.
- Expandable for 5.1 surround sound with additional Sonos speakers and a Sub.
- Control via the Sonos app (Android and iOS).
Controls and Lights
The top panel of the Sonos Ray features touch controls for managing playback and volume.
Volume Control
Touch controls on the top of the soundbar allow for small adjustments or quick changes to volume.
- Volume Up: Touch the right side of the touch control area.
- Volume Down: Touch the left side of the touch control area.
Note: Volume can also be adjusted using the Sonos app or your TV remote.
Play/Pause
Touch the center of the touch control area to play or pause audio.
Next/Previous (Music Only)
- Next Song: Swipe right across the touch controls.
- Previous Song: Swipe left across the touch controls.
Note: Skipping forward or backward is not possible when listening to a radio station.
Status Light
A light on the front of the soundbar indicates the product's connection to WiFi, shows when the volume is muted, and signals errors. More information can be found in the product settings.
Connector Panel
The rear of the Sonos Ray features several ports for connectivity:
| Port Number | Port Name | Description |
|---|---|---|
| 1 | Join button | Press to connect during setup. |
| 2 | AC power (mains) input | Use only the supplied power cord. Using a third-party power cord may void your warranty. |
| 3 | Optical port | Use to connect the soundbar to your TV. |
| 4 | Ethernet port | Optional: Use an Ethernet cable to connect to a router, computer, or network-attached storage (NAS) device. |
Select a Location
The Sonos Ray can be placed above or below your TV, or on a TV stand.
TV Stand Placement
- Place horizontally on a stable, level surface at least 2 inches (50mm) away from the TV.
- Do not place vertically or on its side.
- Ensure the TV's IR sensor is not blocked.
- If placed on a shelf, position it at the front and maintain at least 2 inches (minimum) clearance on both sides for optimal sound quality.
- Keep at least 1 inch (25mm) of space above the Ray to easily access the touch controls.
- For best sound quality, ensure both ends of the Ray are at least 1 foot (30cm) from a wall or other obstruction.
- Make sure the touch controls are facing upwards.
Wall Mount
The soundbar can be secured to a wall using a compatible wall mount. The custom-designed Sonos Ray Wall Mount is recommended and sold separately. Refer to the "Wall Mount" section for more information.
Connect the Cables
Before you start:
- Disconnect any existing home theater or surround sound equipment from your TV.
- Connect external devices (e.g., cable box, DVD player) directly to your TV.
- Turn on your TV.
Connect the power cord and plug in the soundbar.
Note: Use only the supplied power cord. Using a third-party power cord may void your warranty.
[Illustration: Soundbar rear with power cable connected to the AC power input.]
Connect the included optical cable to the optical port on the back of the soundbar.
[Illustration: Soundbar rear with optical cable connected to the optical port.]
Connect the other end of the optical cable to your TV's optical digital OUT port.
Note: The TV's optical adapter port is typically "D-shaped". Ensure the connector aligns correctly before inserting. Incorrect insertion may damage the cable.
[Illustration: Rear of a TV showing the optical digital OUT port and the soundbar's optical cable being connected.]
Product Settings
Customize your Sonos products via the Sonos app. Navigate to ⚙️ System and select your product.
| Setting | Description |
|---|---|
| Room Name | Change the speaker's name if it's moved to a new room. |
| Turn off WiFi (not on portable products) | Disable WiFi when connected via Ethernet to reduce power consumption and potentially improve connectivity for wired speakers. This can also reduce internal temperature for products like Amp and Port when racked or stacked. |
| EQ | Adjust sound settings (bass, treble, balance, loudness) to your preferences. Sonos products come with preset equalization settings. |
| Trueplay | Tunes the sound for your surroundings and content. Requires an iOS device. |
| Volume Limit | Set a maximum volume level for each room. |
| Status Light | Displays WiFi connection status, indicates mute status, and signals errors. Can be turned off in product settings if distracting. |
| Touch Controls | Disable the touch control buttons on the speaker to prevent accidental adjustments, especially useful for households with children or pets. |
Home Theater
Enhance your TV audio with full-theater sound. Create a home theater system by adding a pair of rear surround speakers and a Sub.
Home Theater Settings: Use the Sonos app to adjust sound settings and configure how your home theater speaker interacts with your TV.
Advanced Home Theater Settings:
| Setting | Description |
|---|---|
| TV Dialog Sync | Adjust audio delay (lip sync) in room settings if TV audio is out of sync with video. |
| Group Audio Delay | Adjust settings to resolve audio issues when playing to a group of speakers. |
| TV Autoplay | Automatically switches audio to TV when the TV is turned on (default). Can be turned off in room settings. |
| Ungroup on Autoplay | If the home theater speaker is grouped with other products, it automatically drops from the group when the TV turns on (default). Can be turned off in room settings. |
| Speech Enhancement | Makes TV dialogue clearer and easier to hear. |
| Night Sound | Reduces the intensity of loud TV sound effects while maintaining balance and range. |
| Use IR | Allows an IR remote control to control Sonos devices. |
| Remote Control Setup | Program a remote control during setup, or at any time later. |
Set Up Surround Speakers
Easily turn two Sonos speakers (same model), or a Sonos Amp with compatible speakers, into separate right and left channels for your home theater.
- Place each surround speaker approximately 10 feet (3 meters) from your primary listening position, angled towards the seating area.
- In the Sonos app, navigate to ⚙️ System.
- Select a room containing your soundbar and choose Add Surrounds to begin the setup process.
Note: Grouping rooms or creating a stereo pair will not result in surround sound.
Surround Audio Settings
Surround sound is optimized for your room during setup and can be adjusted later:
| Setting | Description |
|---|---|
| Surrounds | Turn surround sound On or Off. |
| TV Level | Adjust surround volume for TV audio. |
| Music Level | Adjust surround volume for music playback. |
| Music Playback | Choose between Ambient (subtle) or Full (louder, full range) for music playback. This setting does not apply to Dolby Atmos Music. |
Trueplay™ Tuning
Trueplay tuning measures how sound reflects off surfaces in your room (walls, furnishings) and fine-tunes your Sonos speaker for optimal sound quality regardless of placement. Trueplay requires an iOS mobile device running iOS 8 or later. During tuning, you will move around the room holding your mobile device.
- In the Sonos app, navigate to ⚙️ System and select the room you wish to tune.
- Choose Trueplay Tuning to start.
Note: Trueplay tuning is unavailable if VoiceOver is enabled on your iOS device. Turn VoiceOver off in your device settings before tuning.
Auto Trueplay
Portable Sonos products, such as Sonos Roam and Move, can tune themselves automatically using Auto Trueplay. This feature uses the speaker's microphone to analyze the environment and make periodic adjustments for great sound anywhere. To enable Auto Trueplay for a portable speaker, navigate to ⚙️ System in the Sonos app and select your portable speaker.
Accessories and Wall Mount
Accessories
Find accessories tailored for your Sonos system, including stands, wall mounts, chargers, and cables, on the Sonos website. Navigate to the "Accessories" section for a full selection.
Wall Mount
The Ray wall mount kit (sold separately, available at sonos.com) is designed for mounting the soundbar on a flat wall.
Guidelines
- Ensure sufficient space between the Ray and your TV to access the touch controls.
- For optimal sound quality, keep both ends of the Ray at least 1 foot (30cm) from walls or obstructions.
Mount Kit Contents:
- Wall mount bracket
- 2 short attachment screws
- 2 wall anchors
- 2 wall screws
What You'll Need:
- Pencil
- Phillips-head screwdriver
- Power drill (if needed for installation location)
- Measurement tool
- Level
- Stud finder (optional)
Wall Mount Installation Table:
| Wall Mount Type | Pre-drill Size | Use Wall Anchors | Use Screws |
|---|---|---|---|
| Wood stud | 1/8" / 3mm bit | No | Yes |
| Drywall (no stud) | 5/16" / 8mm bit | Yes | Yes |
| Hard wallboard or double board | 5/16" / 8mm bit | Yes | Yes |
| Plaster | 5/16" / 8mm bit | Yes | Yes |
| Concrete or brick | 5/16" / 8mm bit | Yes | Yes |
Set It Up (Wall Mounting Steps)
If your TV is wall-mounted, align the top edge of the bracket with the bottom of your TV, maintaining at least 2.5 inches (approx. 63mm) between them.
[Illustration: TV wall-mounted with soundbar bracket positioned below it.]
Mark the screw locations on the wall and remove the bracket.
[Illustration: Bracket placed against the wall, pencil marking screw holes.]
If using wall anchors, drill pilot holes with a 5/16" drill bit, starting with the hole on the left. Insert the wall anchors. Do not use wall anchors if drilling into wood or plastic. Refer to "Wall mounting information" for details.
[Illustration: Drilling a pilot hole and inserting a wall anchor.]
Position the wall mount bracket over the marked screw locations. Use a level to ensure accuracy. Use a Phillips-head screwdriver or power drill to screw the bracket to the wall, ensuring the center notch is pointing upwards.
[Illustration: Bracket being screwed into the wall, level shown for alignment.]
Using a Phillips head screwdriver, fasten the 2 attachment screws to the back of the soundbar, ensuring they are fully tightened.
[Illustration: Soundbar with attachment screws being inserted into the back.]
Remove the protective cap from the optical cable, then connect the power and optical cables to the back of the soundbar.
[Illustration: Soundbar rear with power and optical cables connected.]
Slide the soundbar down so the attachment screws fit into the slots on the wall bracket. Ensure the touch controls are facing up and the Sonos Ray is fully seated.
[Illustration: Soundbar being attached to the wall bracket.]
Specifications
AUDIO
| Feature | Description |
|---|---|
| Amplifiers | Four Class-D digital amplifiers. |
| Woofers | Two full-range woofers ensure faithful playback of mid-range vocal frequencies plus deep, rich bass. |
| Tweeters | Two tweeters create a crisp and clear high-frequency response. |
| Audio ports | Two micro ports with proprietary anti-distortion technology. |
SOFTWARE
| Feature | Description |
|---|---|
| Sonos S2 | Setup and control with the latest generation of the Sonos app. |
| Apple AirPlay 2 | Works with AirPlay 2 on Apple devices iOS 11.4 and higher. |
| Trueplay | Dynamically tunes the speaker to the unique acoustics of the room or area (iOS device required). |
| Speech enhancement | Turn on this home theater setting in the Sonos app to make TV dialogue even clearer. |
| Night sound | Turn on this home theater setting to reduce the intensity of loud TV sound effects. |
| System requirements | TV with optical digital audio output, broadband internet, and the Sonos app. |
GENERAL
| Feature | Description |
|---|---|
| Dimensions (H x W x D) | 2.79 x 22.00 x 3.74 in (71 x 559 x 95mm) |
| Colors | Black, white |
| Finish | Matte |
| Weight | 4.29 lb (1.95 kg) |
| Speaker status light | Displays the speaker's connection to WiFi, indicates when the volume is muted, and signals errors. |
| Operating temperature | 32°F to 104° F (0°C to 40° C) |
| Storage temperature | -4°F to 122° F (-20° C to 50°C) |
| Control | Use your IR (infrared-enabled) TV remote control, touch controls, or the Sonos app. |
| CPU | Quad Core; 1.4 GHz A-53 |
| Memory | 1 GB SDRAM; 4GB NV |
| Mounting | M5 threaded mounting socket |
POWER & CONNECTIVITY
| Feature | Description |
|---|---|
| Power supply | Auto-switching 100-240 V, 50-60 Hz 2.0A AC universal input. |
| WiFi | Connects to WiFi network with any 802.11b/g/n, 2.4 GHz broadcast-capable router. |
| Optical | Use the included optical cable to connect the soundbar to your TV's optical digital audio output. |
| Ethernet | One port for hardwiring to your router (optional). |
| Infrared receiver | Syncs with your TV remote for streamlined control. |
| Supported devices | Connects to TV with optical cable. Plays sources connected to the TV, including cable boxes and game consoles. |
Important Safety Information
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- This product does not have any user-serviceable parts. Do not open, disassemble, or attempt to repair it or replace any components. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The Mains plug should be readily available to disconnect the equipment.
- Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.
