ADT WTS700 Wireless Touchscreen

Quick User Guide

General Information

The WTS700 is a wireless Touchscreen that allows users to perform system arming and disarming functions, as well as to monitor the status of their security system.

Navigating Menus

System Status is displayed at the top of each screen, and the time and date are displayed at the bottom of the Security Screen. The Security Screen displays the system status and selection "icons". The displayed pages and options may vary slightly depending upon the devices and services that are installed in or connected to the system.

Home Screen

The Home Screen displays system status and provides access to various functions via icons.

Function Icons:

Arm Away: Used to Arm the system in Away mode.
Arm Stay: Used to Arm the system in Stay mode.
Arm Custom: Used to Arm the system in Custom mode.
System: Provides information about system status.
Video: Provides access to Video cameras.
Automation: Provides access to Home Automation features.
Zones: Provides access to Zone information and options.
Tools: Provides access to User Programming Menus (Master User Code required for access).
Voice Command: Provides access to Voice Command feature.
WiFi Config: Provides access to Wi-Fi Configuration feature.
Next/Back: Used to advance to next screen or return to previous screen.
Panic: Provides access to Panic functions.
Home: Provides access to the Home screen.

Panic Icons:

Fire: Alerts the monitoring company that a fire condition exists. Temporal (pulsing) sound. (Displays zone 995)
Police: Alerts the monitoring company that a police emergency exists. (Displays zone 999, default is silent)
Personal: If programmed, alerts the monitoring company to other types of emergency. Steady alarm sound at keypad(s). (Displays zone 996)

Arm the System

Select arming mode: Arm Away (when you're out), Arm Stay (when you'll be home), or Arm Custom (bypass selected zones).
Enter user code.

System arms in selected mode

Exit Delay countdown begins.
Keypad beeps begin, if enabled (Silent Exit mutes countdown beeps).

Disarm the System

Press Disarm icon.
Enter user code.

System disarms

Entry Delay beeps stop (if beeps enabled).

Configure Wi-Fi

Connect the control to your local network router.

Select the Wi-Fi Config Icon.
Select from the following options:
- Scan for Network: To automatically display available networks.
- Manually Connect to the Network: Manually connect to a Wi-Fi network.
- WPS: Connect to a network via Wi-Fi Protected Setup.
Follow the prompts:
- Scan for Network: Select the desired network, enter the required information, and select OK.
- Manually Connect to the Network: Enter the required information and select OK.
- WPS: Follow the prompts. (Note: This option requires a WPS capable router.)

Assign User Codes

Select the Tools Icon.
Enter Master User code.
Select Users icon.
To assign a Master, Guest, or Duress code, press the desired option then press Edit. To assign a regular user code, press Add New.
Select Name to assign a personal name to this user. Follow the prompts.
Select User Code to assign a 4-digit code to this user.
Assign 4-digit code and select Save.

Voice Command

Voice Command offers control of Z-Wave devices and Video functions by speaking in plain language. User-selected trigger phrases spoken near the Controller alert the system to listen for further instructions. Refer to the system's User Guide for additional information regarding this feature.

View Cameras (if installed)

Select the Video Icon.
Scan for cameras.
Select up to 4 cameras.
Display: Select Display to view video from selected cameras.
Use zoom in, zoom out, and pan & tilt controls.
Scan: Select Scan to list newly-installed cameras.

Bypass Zones

Press Zones icon.
Select zones to bypass from list.
Select BYPASS.
Enter user code.
Bypassed zones appear in list with icon.
Arm the system as usual.

Test the System

Disarm the system and close all protected windows and doors. NOTE: Alarm messages are NOT sent to your alarm monitoring company during these tests.

Select the Tools Icon.
Enter the Master user code.
Select Advanced icon, then select Walk Test.
Trigger Zones: Trigger (open and close) all zones. Listen for three beeps from the controller when each zone is triggered.
Exit Test mode: When testing is completed, press the Home button on the controller and enter the Master User Code if prompted.

Activate Automation Devices (Z-Wave)

Z-Wave device (for Lights, Locks, Thermostats and Garage Doors), inclusion and exclusion is via the ADC and/or ADT Pulse app. Refer to the systems User Guide for additional information.

Select the Scenes Icon.
Select type of device (Switches, Water Valves, Thermostats, Locks, Garages).
Select a specific device from the list.
Select Desired Action. Actions vary based on the device selected.

Settings

Select the Settings Icon.
Adjust screen brightness and Voice/Chime volume.
Select VOICE or CHIME to mute voice announcements and/or chime sounds if desired (highlighted [blue] button indicates active).
Select Clean icon before cleaning the screen; use a damp, soft cloth while screen is disabled for 15 seconds.

FOR MORE DETAILED INFORMATION

These instructions provide a brief overview of common system functions. For full details of all user functions, please see the system's User Guide located online at: https://www.adt.com/help/faq/system-user-guides (see ADT7AIO User Guide P/N 800-24122 or higher). Refer to Installation Instructions PN 800-24298 for more detailed information.

Warning - 5G Band 5150-5250MHz is only for indoor use.

	ADT WTS700 Wireless Touchscreen Installation and Setup Guide This guide provides installation and setup instructions for the ADT WTS700 Wireless Touchscreen, detailing battery installation, enrollment procedures, and system specifications. Compatible with ADTHYBWL and ADT7AIO control panels.
	ADT Home Security Bill Explained A guide to understanding your ADT home security bill, detailing account information, payment due dates, charges, and how to manage your account online.
	ADT Smart Home Hub IQ Panel User Guide Comprehensive user guide for the ADT Smart Home Hub (IQ Panel), detailing system navigation, security features, smart home device control, and advanced settings for enhanced home safety and convenience.
	ADT SIXRPTRA Wireless Repeater Installation and Setup Guide Comprehensive guide for installing and setting up the ADT SIXRPTRA Wireless Repeater, covering features, guidelines, compatibility, mounting, enrollment, and specifications for extending SiX series device range.
	ADT ADT7AIO/ADT5AIO Series Security Systems User Guide User guide for the ADT ADT7AIO/ADT5AIO Series Security Systems. This guide provides information on system overview, basic functions, security features, control panel settings, automation features, wireless touchpads/touchscreens, and troubleshooting.
	ADT TSSC-BASE and TSSC-KP User Guide: Operation and Features Comprehensive user guide for the ADT TSSC-BASE Base Control Unit and TSSC-KP Wireless Bidirectional Alpha Keypad. Learn about system features, key functions, operation, user codes, testing, battery replacement, and warranty information.
	ADT Security System User Manual: Operation, Features, and Fire Safety Comprehensive user manual for ADT and Moose security systems, covering arming, disarming, alarm conditions, special features, fire detection, and emergency evacuation. Learn how to operate and maintain your security system.
	ADT 4520-810 Power Supply Unit Technical Data Sheet Technical data sheet for the ADT 4520-810 Power Supply Unit, detailing its specifications, features, operation, installation, testing, and replacement parts for fire alarm monitoring and control systems.