Tristar ST-8300 Steam Iron Instruction Manual

Safety Precautions

By ignoring the safety instructions, the manufacturer cannot be held responsible for any damage. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard. Never move the appliance by pulling the cord and ensure the cord cannot become entangled. The appliance must be placed on a stable, level surface. This appliance is only to be used for household purposes and only for the purpose it is made for. This appliance shall not be used by children aged less than 8 years. Children aged 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge may use the appliance if they have been given supervision or instruction concerning use in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.

To protect yourself against an electric shock, do not immerse the cord, plug, or appliance in water or any other liquid. Keep the appliance and its cord out of reach of children less than 8 years of age when it is energized or cooling down. Do not leave the iron unattended while it is connected to the mains supply. Do not open the water tank during use. Do not use the iron if it has been dropped, if there are visible signs of damage, or if it is leaking. Ensure the iron will be used and rest on a stable surface. Remove the plug from the socket before the water reservoir is filled with water. The surface is liable to get hot during use.

Parts Description

The Tristar ST-8300 features the following components:

• 1. Temperature knob
• 2. Water tank cover
• 3. Steam rate control button (for decreasing steam)
• 4. Spray head
• 5. Spray button
• 6. Burst of steam button
• 7. Soleplate
• 8. Indicator light

Before First Use

Carefully read all instructions before using the iron. Clean the soleplate with a soft damp cloth before the iron will be used for the first time. Pull out the water tank cover and slowly fill the water tank with clean cold water using the measuring cup. A slight odor or smoke may be emitted at the beginning, caused by the warming up of the insulation material. Note: Some particles may come out of the soleplate when you use the iron for the first time. This is normal; the particles are harmless and will stop coming out after a short while.

Using the Iron

Selecting the Temperature

Check the ironing instructions on the garment to be ironed. If the garment does not have any ironing instructions but you know the kind of fabric, use the chart below. Fabrics with a finish (polishing, wrinkles, contrast) can be ironed at the lowest temperatures. If the fabric contains several kinds of fibers, always select the temperature applicable to the most delicate fiber. For example, if an article contains 60% polyester and 40% cotton, always choose the temperature corresponding to polyester and use no steam. Classify garments by ironing temperature: wool with wool, cotton with cotton, etc. Start with items requiring the lowest temperature (synthetics) and progress to those requiring higher temperatures.

• Position • for nylon and acetate
• Position •• for wool, silk, or mixtures
• Position ••• for cotton or linen (steam)

Filling the Water Tank

Unplug the iron. Set the steam regulator to dry ironing. Fill the tank through the filling hole. If you have hard water, it is advisable to use only distilled or demineralized water. Do not use chemically de-scaled or perfumed water. Do not store the iron with water in the tank.

Steam Ironing

Fill the iron as described above. Plug the iron into the mains. Steam ironing is only possible when the highest temperature is selected; otherwise, water may escape through the soleplate. Turn the steam button to the required position. When finished or during breaks, place the iron in an upright position. Disconnect the iron from the mains supply. Pour out any remaining water and let the iron cool down.

Spray Function

The spray can be used in any position, for dry or steam ironing, as long as the water tank is filled. Press the spray button. Note: This button may need to be pressed repetitively to start the function for the first time.

Burst of Steam

The burst of steam provides extra steam for removing stubborn wrinkles. Wait a few seconds for the steam to penetrate the fabric before pressing again. For best steam quality, do not use more than three successive bursts at a time.

Cleaning and Maintenance

Always unplug the device and let it cool down completely before cleaning. To avoid damage to the soleplate, never use sharp or metal objects to scrape it. To remove scale from the steam holes, use a cotton swab moistened with a mild descaling solution. Clean the housing with a soft damp cloth. Do not use abrasive detergents or steel wool, as they can scratch surfaces. Empty any remaining water from the water tank; do not leave water in the tank overnight. Always allow the iron to cool completely before winding the cord around the soleplate.

Environment

This appliance should not be disposed of with domestic waste at the end of its durability. It must be offered at a central point for the recycling of electric and electronic domestic appliances. The materials used in this appliance can be recycled. By recycling used domestic appliances, you contribute to the protection of our environment. Ask your local authorities for information regarding collection points.

Support

All available information and spare parts can be found at www.tristar.eu!