ProtoArc EM15 Wireless Mouse User Manual

Product Features

• Dual Receiver (USB + Type-C)
• Rechargeable Mouse

Components

The ProtoArc EM15 mouse features the following components:

• M: Left Button
• N: Right Button
• DPI/Low Battery Indicator
• Scroll Wheel
• Forward Button
• Backward Button
• Charging Indicator
• DPI Button
• TYPE-C Charging Port
• USB Connection Indicator
• Type-C Connection Indicator
• Power Switch
• Type-C Receiver
• Channel Switch Button
• USB Receiver

Operation

DPI Adjustment

Press the DPI button to adjust the cursor sensitivity. The indicator light will flash to show the DPI level:

• One flash: 800 DPI
• Two flashes: 1200 DPI
• Three flashes: 1600 DPI

Jiggler Mode

The jiggler mode keeps your computer active by simulating mouse movement.

• Activation: Press and hold the DPI button for 3-5 seconds. The red light on the scroll wheel will illuminate, indicating jiggler mode is active.
• Deactivation: Press and hold the DPI button again for 3-5 seconds. The red light will illuminate, indicating jiggler mode is exited.
• Automatic Operation: Once activated, the mouse cursor can still be controlled. However, if the mouse is idle for 5 seconds, it will automatically switch back to jiggler mode.
• Receiver-Based Functionality: The jiggler function is tied to the receiver. It will continue to work even if the mouse's power switch is turned off, as long as the jiggler mode is enabled.
• Multi-Computer Use: It is possible to operate two computers simultaneously in jiggler mode. Connect an Apple computer first to enter jiggler mode, then switch to a Windows computer to enter jiggler mode.
• Canceling Jiggler Mode: You can exit jiggler mode by pressing and holding the DPI button for 3 seconds, unplugging the receiver, or turning off the computer.

2.4G USB Connection

1. Turn the power switch to ON.
2. Take out the USB receiver.
3. Press the channel switch button until the white light for the USB channel is on.
4. Insert the USB receiver into your computer's USB port.

Type-C Connection

1. Turn the power switch to ON.
2. Take out the Type-C receiver.
3. Press the channel switch button until the white light for the Type-C channel is on.
4. Insert the Type-C receiver into your computer's Type-C port.

Switching Connection Channels

After both USB and Type-C channels are connected, press the channel switch button on the bottom of the mouse to switch between the two connected devices.

Charging Guide

1. When the mouse power is low, the charging indicator and the corresponding channel indicator will flash until the mouse is turned off.
2. Insert the Type-C charging cable into the mouse. The red light will stay on during charging.
3. Charging time is approximately 1-3.5 hours. The indicator light will turn green when fully charged.

Please use the charging cable included with the mouse. If using another charging cable, ensure it is a USB-A to Type-C cable.

Data Parameters

Packing List

• 1 x Wireless Mouse
• 1 x USB Receiver
• 1 x Type-C Receiver
• 1 x Type-C Charging Cable
• 1 x User Manual

Manufacturer Information

Manufacturer: Dongguan Togran Electronics Technology Co.,Ltd

Address: No.110, Shidan Middle Road, Shijie Town, Dongguan City, Guangdong Province, China, 523290