Wireless Microphone

User Manual

Introduction

Thank you for choosing this product.

This product is a smart wireless microphone that provides professional-grade recording output. It is a plug-and-play device, requiring no app. It can be used for various occasions, including online live broadcasts, video Vlog shooting, program interviews, recording, and video teaching.

The wireless microphone system consists of two main parts: a microphone transmitter and a receiver.

ID Diagram

The wireless microphone system includes a transmitter (microphone) and a receiver. Below is a detailed breakdown of their components:

Microphone Transmitter Components:

Windproof netting
Microphone indicator
Microphone charging port
Microphone clip
Power on and off button
Next song button
Previous song button
TF/SD card slot

Receiver Components:

Power on and off button
Pause button
3.5mm external interface
Type-C charging port
USB port

Visual representation: A cylindrical microphone transmitter with a windproof netting at the top, indicators, charging port, and clip on its body. A rectangular receiver unit with a speaker grille, various buttons, and ports.

How to use

Step 1: Turn on the receiver knob switch to "ON". The green light on the receiver will flash.
Step 2: Short press the power button of the microphone for 2 seconds. The indicator light on the microphone will illuminate, indicating successful startup.
Step 3: Once the receiving end light is continuously on, clip the microphone in an appropriate position for use.

Visual representation: A sequence showing the receiver being turned on, then the microphone transmitter being powered on, and finally the microphone being clipped for use, with a wireless signal icon ( ( ( (•) ) ) ) indicating connection.

Special Instructions

The voltage input for both the microphone and receiver charging port is 4.8-5.3V.
The volume of the receiver can be adjusted according to user needs.
An external wired microphone is compatible and can be switched through buttons.

About UI (User Interface)

Emitter (Microphone Transmitter) - Default original sound upon startup

Keys	LED status	Remarks
Power on (Press the button on the device)	Flashing red and green alternately
Shutdown (Press the button on the device)	All lights are off
Not connected	Flashing red and green alternately
Connected	Green always on, red light off	Default entry into recording mode
Noise reduction (Default original sound upon startup)	Green light always on
Mute (Click Mute)	Green light flashing slowly
Charging	Red light always on, green light off
Fully charged	All lights are off
Low electricity	Red light flashes once every 10 seconds, green light goes out	Entering low battery mode below 3.4V, Shutdown below 3.2V, Unable to power on below 3.2V

Receiver (including amplification part)

Key or operation steps	LED status	Remarks
Power on (Rotate the potentiometer to "ON")	Green light flashing
Shutdown (Rotate the potentiometer to "OFF")	All lights are off
Modulation (Rotate the potentiometer button)		5-speed adjustment
Connected	Green light always on
External microphone connection (Tap the pause button 3 times in a row)		Switch between wired microphones
Bluetooth (Press and hold the pause button in microphone mode)		Bluetooth mode "557"
USB (Insert the microphone into the USB flash drive)
SD/TF card (Insert the SD/TF card in the microphone state)
Previous song (Press the "-" key)		Switch to the previous track
Next song (Press the "+" key)		Switch to the next track
Charging	Red light always on, fully charged with green light for charging (dual color)
RX battery indicator		Alarm prompt at 3.2V voltage (voice prompt in software)

Packing List

Content of packing

Microphone transmitter
Receiver
Charging cable
User manual
Backstraps

Important Warning

The quasi-input voltage of the charging port is 4.8-5.3V.

Certificate

QC PASS

warranty card

Model: ________

QC: ________

Date: ________

	Wireless Microphone User Manual and Product Information Comprehensive guide for the wireless microphone, including setup, usage, features, and package contents. Learn how to connect and use the microphone with Type-C devices for professional audio recording.
	Wireless Microphone User Manual and Setup Guide This user manual provides comprehensive instructions for the Wireless Microphone, covering its components, setup, operation, and LED indicator meanings for both the microphone transmitter and receiver. It also includes a detailed packing list.
	FCC RF Exposure Evaluation for Wireless Microphone TW364 This document provides an FCC RF Exposure Evaluation for the TW364 Wireless Microphone, including product information, evaluation methods, conducted power results, and SAR test exclusion details, confirming compliance with FCC limits.