Wireless Microphone User Manual

ID Diagram

The following diagram illustrates the key components of the wireless microphone system, including the microphone transmitter and its charging box. Each part is numbered for easy identification.

Microphone Transmitter Components:

Windproof Net
Connection/Mute Indicator Light
Noise Reduction/Reverberation Indicator Light
Power Indicator Light
Microphone Type-C Charging Port
Magnetic Clamp
Power Button

Charging Box Components:

Port to Connect Phone
Charging Interface
Indicator Light
Charging Box Type-C Charging Port
Charging Box Indicator (digital display)

How to Use

Step 1: Long press the power button on the microphone. The connection indicator light will flash, indicating successful power on.
Step 2: Connect one end of the receiving unit to the phone interface.
Step 3: The indicator light for the connection between the receiver and transmitter remains on, indicating a successful connection. Users can then open a camera live streaming application on their phone and use the microphone to listen.

Note: For Oppo, Vivo, iQOO, and Realme brand mobile phones, the microphone can be used normally only when users navigate to their phone settings and search for "OTG" to turn on OTG power supply.

About the User Interface

Microphone Transmitter Functions:

Function	Button Operation	LED Indicator
Power On	Automatically powers on and pairs when taken out of the charging case.	Connection indicator light flashes slowly.
Power Off	Long press the power button for 3 seconds.	All lights are off.
Noise Reduction	Click the power button.	Noise reduction on: The noise reduction blue light is always on. Noise reduction off: The noise reduction light is off.
Silent Mode	Double click the power button.	Mute on: The mute light is on. Mute off: The mute light is off.
Reverberation	Three clicks of the power button.	Noise reduction mode with reverb: Noise reduction blue light and reverb green light are on. Original sound mode with reverb: Reverb green light is always on. Turn off reverberation: The reverberation green light goes out.
Charging	When charging, the power indicator light is always red and on. When fully charged, the light is off.	—
Low Electricity	The battery level is below 20%.	The red light flashes slowly.

Receiver Functions:

Function	Operation	LED Indicator
Not Connected	—	TX1 and TX2 indicator lights flash simultaneously.
Connect 1 Microphone	—	TX1 stays on, TX2 stays on for 15 seconds before turning off.
Connect 2 Microphones	—	TX1 and TX2 indicator lights are constantly on.
Volume Switching	Click the button to increase or decrease the volume in three levels in a loop.	One level volume: Volume 1 light is always on, 2 and 3 are off. Second level volume: Volume 1 and 2 lights are always on, and volume 3 is off. Three levels of volume: All three lights are constantly on.
Enter Pairing Mode	Press the three buttons to enter pairing mode.	Unconnected triple tap: TX1 and TX2 lights flash simultaneously. Connect only TX1 for three clicks: TX1 stays on, TX2 flashes rapidly. Connect only TX2 for three clicks: TX2 stays on, TX1 flashes rapidly. After TX1 and TX2 are connected: Three press button operation is invalid.

Packing List

The package includes the following items:

Microphone transmitter
Lightning receiver
Charging box
Charging cable
User manual

	Wireless Microphone User Manual - Professional Recording Device Comprehensive user manual for a smart wireless microphone, offering professional-grade recording for live broadcasts, video vlogging, interviews, and educational content. Learn about its features, setup, and operation.
	Wireless Microphone User Manual and Product Information Comprehensive guide for the wireless microphone, including setup, usage, features, and package contents. Learn how to connect and use the microphone with Type-C devices for professional audio recording.
	FCC RF Exposure Evaluation for Wireless Microphone TW364 This document provides an FCC RF Exposure Evaluation for the TW364 Wireless Microphone, including product information, evaluation methods, conducted power results, and SAR test exclusion details, confirming compliance with FCC limits.