SHARP androidtv Quick Start Set Up Guide

Quick & easy guide for setting up your TV

What is included in the box

Using the remote control

Setting up the TV for the first time - including attaching the stand

Connecting other devices to the Television

Need help setting up or using your TV?

Please contact the UK & ROI Helpline*

Telephone UK: 0330 024 0803 or ROI: 01443 3323

Online support at: www.umc-uk.co.uk

Email support at: service@umc-uk.co.uk

*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider. Hours are correct at time of this document being published. Please note these hours are subject to change periodically. Calls to the ROI number are charged at the local call rate.

The helpline telephone opening hours are:

Monday - Friday: 8.30am - 6pm

For Saturdays and Bank Holidays, please refer to the website for our opening hours.

Using the remote control

Model Numbers

43FN2KA, 50FN2KA, 55FN2KA, 43FN4KA, 50FN4KA, 55FN4KA, 43FN6KA, 50FN6KA, 55FN6KA, 43FN7KA, 50FN7KA, 55FN7KA

Technical Specifications

Note: Power consumption figures for SDR and HDR may vary based on home mode, standard, or maximum settings. Standby power consumption is less than 0.5W.

Important Information & Technologies

DTS:X: Manufactured under license from DTS, Inc. For DTS patents, see http://patents.dts.com. DTS, DTS:X, Virtual:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.

HDMI: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Android TV: Google, Google Play, YouTube, Android TV and other marks are trademarks of Google LLC.

Dolby Audio / Dolby Vision: Manufactured under license from Dolby Laboratories Licensing Corporation. Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2022 Dolby Laboratories. All rights reserved.

Microsoft PlayReady™: This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

Freeview Play: Freeview Play brings together live TV viewing with "catch up" TV services such as BBC iPlayer, ITV Player, More4 and Demand 5. The Freeview Play Explore app features a carousel of genres to select from when searching for programmes, such as sport, comedy, dramas and soaps, etc. Content is made up from recommendations of the major broadcasters and offers an alternative means of searching. Note that to use the full functionality of Freeview Play your set must be connected to the internet.

Online Manual

To launch the online manual, press the HOME button, select Apps from the Home menu, and select "E-instruction Manual" from the apps list.

What is included in the box

Accessories

Included with this TV are the following accessories:

• 1 x Quick Start Guide
• 1 x Safety Leaflet
• 1 x Remote Control and 2 x AAA Batteries
• 1 x Stand installation pack

Additional Accessories

If you don't have the RF cable shown below, then you can purchase one from www.umc-uk.co.uk/cables. If you are intending to connect your TV to an RF socket in order to receive Freeview, you will need this cable.

[RF Cable Description]

Sky Remote Code

If you wish to use your Sky remote to operate the TV's basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134. If you wish to use your Sky Q remote to operate the TV's basic functions, you will need to program it with the code 4170.

Packaging and Support

Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in its original box/packaging.

Setting up the TV set for the first time

1 Fitting the stand

The TV panel must be facing downwards.

For the stand installation, there is one type of screw provided as shown below.

Note: To complete the stand installation you will require a cross head screw driver.

[Diagram: 4 x screws used for attaching the stand to the TV set]

Place the TV set on a flat and clean surface with the panel facing downwards to avoid damage.

Ensure the stand feet match the orientation as shown above.

2 Connecting your set

1. Connect the TV to your power socket.
2. If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.
3. Connect to the internet. Ethernet provides the most stable connection.

3 Powering On the TV

LED Light: Switch on the television by pressing the on/off button on the bottom of the LED light.

Remote Control: Installing Batteries

Insert the batteries supplied into the remote controls and press the standby button to power on the TV.

4 First time installation

Basic installation steps are shown below. These may vary slightly depending on your model. Due to Android software updates, the look and feel of the TV start up procedure and subsequent menus can be subject to change.

When the set first turns on, it will ask you to select your preferred on-screen display language. This will change the language in which the menus and associated information is displayed in.

Navigation Controls: ⬆️⬇️⬅️➡️/✅ Allows you to navigate the on-screen menus and adjust settings to your preference.

Android Phone users

During the set-up process, you will be prompted to sign-in to your Google account using your pre-installed "Google" app. This set up process will depend upon which model TV you are setting up. Please ensure you have your account details to hand.

5 Pairing the remote

If during the first time installation process the remote was not paired or skipped, then follow the process below to pair your remote with the television.

1. Turn the set on.
2. Press the ? button on the remote control.
3. The pairing screen will appear on the TV.
4. Now press and hold the "Left" and "Home" buttons on the remote simultaneously (highlighted).
5. The LED indicator on the remote control will start to flash.
6. Select the detected remote control shown on the screen and press OK.
7. Once paired the pairing screen will disappear.

This process will only need to be carried out if the remote is not paired. Once paired, when the ? button is pressed, it will open the Google Assistant screen on the set and activate voice functionality.

6 The Google Assistant

Using the Google Assistant with your voice

Remote controls with the Google Assistant have a Google Assistant dedicated button and a built-in microphone. To use this feature with the Google Assistant remote control, follow the instructions as below.

1. Before using the Google Assistant, you will need to pair the remote. Please follow step 5 of this guide to pair your remote to enable the Google Assistant.
2. Press the ? button. The LED indicator on the remote control will illuminate.
3. Wait for the on-screen message from the Google Assistant, then speak into the microphone. A good rule of thumb is to have the microphone positioned about 15-30 centimetres away from your mouth.

By speaking into the microphone, you can search for various content or control your connected smart home devices. Speech examples may be displayed on the television screen depending on your model.

Wall Mounting the TV

[Diagram: Wall mounting the TV]

1. Remove the four screws that are supplied in the wall mounting holes.

2. The wall mount can now be easily attached to the mounting holes on the rear of the TV.

3. Install the wall mounting bracket to the television as advised by the bracket manufacturer.

Image for illustration only. For the dimensions of the VESA mounting, please refer to the Technical Specifications section of this document. The picture shows the use of spacers, which are not applicable to all sets/installations.

Connectivity

[Diagram: TV Ports]

A Ethernet/LAN: Network connection

B Digital Audio: Digital Optical Audio Output

C Earphones: Earphone output

D HDMI 4: HDMI input

E HDMI 3: HDMI input

F SAT IN: Satellite input

G RF IN: RF / TV aerial input

H HDMI 2: HDMI input

I HDMI 1: HDMI input (eARC)

J USB: USB 2.0 input x2

K AV IN: Audio/Video input

L TF Card in: TransFlash/micro SD Card input

M Service Input: Input is used only by service centres

N CI Card in: Common Interface module