zDental Try In
Technical Data Sheet
Product Description
zDental Try In is a light-curing resin for the generative manufacturing of try-ins for full and partial dentures using 3D LCD printers utilizing wavelengths between 385nm-405nm. zDental Try In has excellent mechanical properties that is intended for evaluation of fit, occlusion, esthetics, and phonetics during try-in appointments.
Characteristics
| Tested Property | Result | Standard/Method |
|---|---|---|
| Tensile Property | ||
| Tensile Strength, MPa | 50.16 | ASTM D638 |
| Tensile Modulus, MPa | 4057.13 | ASTM D638 |
| Elongation, % | 2.49 | ASTM D638 |
| Flexural Property | ||
| Flexural Modulus, MPa | 109.1 | ISO 178 |
| Flexural Strength, MPa | 3311.41 | ISO 178 |
| Impact Property | ||
| IZOD Impact (Notched), J/m | 21.59 | ASTM D256 |
| Physical Characteristics | ||
| Shore D Hardness | 92 D | ASTM D2240 |
| Viscosity (at 25°C) | 589 mPa·s | |
1. The testing samples are printed by NBEE with default parameters of 100 µm layer thickness, and post-cured by UCure with default parameters of the zDental Try In resin.
2. Mechanical properties will vary based on printer, model orientation onto build platform, printing parameters used, cleaning and post-curing of the printed parts, and so on. Learn more at www.uniz.com.
3. UNIZ guarantees that the information and data stated herein are based upon tests in our lab and are considered to be reliable and accurate. This information and data are used for reference only, no warranty as a legal basis. Users should be tested by themself firstly.
