ASUS TUF GAMING B650-PLUS Motherboard Quick Start Guide

Motherboard Layout

The motherboard layout diagram shows the placement of various components and connectors. Key areas include:

• CPU Socket (Socket AM5)
• DDR5 DIMM slots (DIMM_A1, DIMM_A2, DIMM_B1, DIMM_B2)
• PCIe slots (PCIEX16_1, PCIEX16_2, PCIEX1_1, PCIEX1_2)
• M.2 slots (M.2_1, M.2_2, M.2_3)
• SATA 6Gb/s ports
• ATX Power Connectors (ATX_PWR, ATX_12V_2, ATX_12V_1)
• CPU Fan and other fan headers (CPU_FAN, CPU_OPT, AIO_PUMP, CHA_FAN1, CHA_FAN2, CHA_FAN3, CHA_FAN4)
• System Panel Connectors (AAFP, COM_DEBUG, CLRTC, CHA_FAN3, ADD_GEN 2_3, USB_1415, USB_1617, CHA_FAN4, PANEL, RGB_HEADER, TB_HEADER)
• Rear I/O Ports (HDMI_DP, USB ports, LAN, Audio jacks)

Specific steps are indicated by numbers on the diagram, such as Step 1 through Step 7.

Australia Statement Notice

From January 1, 2012, updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details, please visit https://www.asus.com/support/. ASUS products come with guarantees that cannot be excluded under the Australian Consumer Law. Customers are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. Goods are also entitled to be repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. For assistance, contact ASUS Customer Service at 1300 278 788 or visit https://www.asus.com/support/.

India RoHS

This product complies with the "India E-Waste (Management) Rules, 2016". It prohibits the use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs), and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogeneous materials, and 0.01% by weight in homogeneous materials for cadmium, except for exemptions listed in Schedule II of the Rule.

Türkiye RoHS

TÜLT Yönetmeliğine Uygundur

HDMI Trademark Notice

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Installation Steps

Step 1: Install the CPU

Follow the diagrams to correctly install the CPU into the socket.

• Ensure the CPU orientation matches the socket markings.
• Gently lower the CPU into the socket.
• Secure the CPU with the retention mechanism.

Step 2: Install the CPU fan

Install the CPU cooler according to the provided diagrams (Type 1 and Type 2). Ensure proper mounting and connection of the fan.

NOTE: Remove the screws and the retention module only. Do not remove the plate on the bottom.

Step 3: Install memory modules

Insert the memory modules into the DIMM slots. Ensure they are fully seated and the clips lock into place.

• Refer to the diagram for correct DIMM slot population (e.g., DIMM_A2, DIMM_B2 for dual-channel).

Step 4: Install storage devices

Install storage devices like M.2 SSDs or SATA drives. For M.2 installation, refer to the user guide.

Step 5: Install expansion card(s)

Install expansion cards (e.g., graphics cards, network cards) into the appropriate PCIe slots.

Step 6: Install the system panel connector

Connect the system panel connectors (power switch, reset switch, LEDs) to the motherboard headers as indicated.

The diagram shows the front panel connectors like HDD LED, RESET SW, and PLED.

Step 7: Install ATX power connectors

Connect the main ATX power supply connectors to the motherboard. This includes the 24-pin ATX power connector and the 4/8-pin CPU power connector.

Diagrams show the connection of ATX power connectors.

Step 8: Connect input/output devices

Connect your keyboard, mouse, monitor, and other peripherals to the rear I/O ports.

The diagram illustrates connecting a monitor via HDMI/DP and USB devices to the rear panel.

Step 9: Power on the system and install operating system and drivers

Turn on the system and proceed with installing your operating system and necessary drivers from the manufacturer's website or provided media.