Important Safety Instructions
WARNING: SHOCK HAZARD. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) OF THE UNIT. REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of significant magnitude to constitute risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompanying the appliance.
- Read these instructions.
- Guard this manual.
- Obey all alerts.
- Follow all instructions.
- WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Do not store and operate this product near liquid.
- Clean only with dry cloth.
- Do not store and not operate this product near any heat sources such as radiators and heat registers, stove or other appliances (including amplifiers) that produce heat. Keep this product in a well ventilated place.
- Do not ignore the safety purpose of the polarized or grounding plug. A polarized plug has two blades being wider than the other. A grounding plug has two blades plus a round pin to ground. The wide blade or the third prong is intended to provide security. If the provided plug does not fit into your outlet, consult an electrician to replace the outlet.
- Protect all wires connected to this unit from being walked on or pinched, particularly at plugs and the point where the cord exits the unit. When unplugging from the electrical outlet, grasp the plug and do not pull the cord.
- Disconnect the unit during lightning storms or when long period is to remain unused.
- Keep this unit off when connecting all the devices connected to it.
- After finishing the installation and connections, connect all your equipment with low volume level. Once all devices are connected, slowly increase the volume or level controls to achieve the proper position.
- Before placement, installation, assembly or suspending any product, inspect all equipment, suspension, cabinets, transducers, brackets and associated equipment. Any missing component, corroded, deformed, or with non-nominal load can reduce the intensity, placement and arrangement of the installation significantly. Any of these conditions can reduce the security of the facility and must be corrected immediately. Use only suitable equipment for the loading conditions of the installation and that any possibility of reducing term, unexpected overload, never exceed the capacity of the material or equipment.
- Consult a licensed professional to install the equipment and make sure that all local, regional and national regulations related to security are understood and adhered to.
- All services should be performed by qualified professionals. Servicing is required when the apparatus has been damaged in any way, as if having the power cord or its damaged connector, or if the machine breaks contact with liquid or if any object is inserted in the unit or if the unit is exposed to rain or moisture, or if the unit does not operate normally, or has been dropped.
CHARGE THE BATTERY FULLY BEFORE FIRST USE TO OPTIMIZE ITS LIFETIME PERFORMANCE.
In the Box
- Portable Bluetooth® Speaker
- Remote Control
- Power Adapter
- Wired Microphone
- User Manual
Key Features
- Bluetooth® functionality allows wireless streaming from Bluetooth-enabled devices.
- Connect to other Sound Pro NDS-8008 TWS speakers (up to 33 feet apart).
- Full Glow Disco Light for party atmosphere.
- Play media from TF memory cards and USB flash drives via built-in slots/ports.
- 3.5mm AUX input for connecting external media devices.
- 6.5mm MIC input with included wired microphone for karaoke.
- High-power speaker for clear, dynamic sound.
- Built-in FM radio tuner.
- Built-in carrying handle for portability.
Back Panel Description
The back panel features various controls and inputs:
- 1. USB Control Board: Interface for USB playback.
- 2. USB & Micro SD Memory Card Input: Slots for connecting USB drives and Micro SD cards.
- 3. Master Volume Control Knob: Adjusts the overall volume of the speaker.
- 4. 3.5mm AUX Input: Connect external audio devices via a 3.5mm cable.
- 5. 6.5mm Microphone Input: Connect a microphone for karaoke or announcements.
- 6. Power Switch Button: Turns the speaker on and off.
- 7. Echo Volume Control Knob: Adjusts the echo effect for the microphone.
- 8. Microphone Volume Control Knob: Adjusts the volume for the microphone input.
- 9. Battery LED Indicator: Red light indicates charging; light turns off when fully charged.
- 10. DC 5V Input: Port for charging the speaker using the included adapter.
- 11. LED Light Control: Press and hold to turn the LED disco light on or off.
- 12. Music Treble Adjustment Knob: Adjusts the treble frequencies for music playback.
- 13. Music Bass Adjustment Knob: Adjusts the bass frequencies for music playback.
- Composite Button: Briefly press the Play/Pause button ▶️ / ⏸️ to play or stop audio playback. Press and hold the Play/Pause button ▶️ / ⏸️ to enable TWS (True Wireless Stereo) function.
Remote Control
The remote control provides access to various functions:
- 1. Standby Button: ? Puts the speaker in standby mode.
- 2. Mode Button: ? Cycles through input modes (AUX, FM, Bluetooth, USB).
- 3. Mute Button: ? Mutes or unmutes the audio output.
- 4. Play/Pause Button (MP3 Mode); Scan (FM Mode): ▶️ / ⏸️ Starts/stops playback or scans for FM channels.
- 5. Next Song (MP3 Mode); Next Channel (FM Mode): ⏭️ Skips to the next track or FM station.
- 6. Previous Song (MP3 Mode); Previous Channel (FM Mode): ◀️ Skips to the previous track or FM station.
- 7. EQ Effect (MP3 Mode): ?️ Selects equalizer presets for music.
- 8. Increase Speaker Volume: ➕ Increases the master volume.
- 9. 0-9 Number Pad: Directly select tracks by number in MP3 mode.
- 10. Stop Button: ⏹️ Stops audio playback.
- 11. Decrease Speaker Volume: ➖ Decreases the master volume.
- 12. Repeat Song (MP3 Mode): ? Sets repeat mode for tracks.
Pairing a Bluetooth® Device
Stream music wirelessly from a Bluetooth-enabled device (e.g., smartphone, tablet).
- Ensure Bluetooth® is enabled on your device and it is near the speaker before attempting to pair.
- Turn on the speaker. It will automatically enter pairing mode and emit a beeping sound.
- On your device, search for nearby Bluetooth devices. The speaker will appear as "SOUND PRO NDS-8008".
- Select "SOUND PRO NDS-8008" from the list. The speaker will play a confirmation tone upon successful connection.
You can now play music from your connected device.
TWS Function
Enjoy audio played over multiple speakers simultaneously using the TWS function.
- Turn on two speakers and set both to Bluetooth (BT) mode.
- Select one speaker to initiate the pairing process.
- Press and hold the PLAY/PAUSE (TWS) button ▶️ / ⏸️ for 3 seconds. A chiming sound indicates the speaker is ready to pair with another unit.
- Connect your smartphone to one of the paired speakers via Bluetooth®.
- Audio will play through both connected speakers.
NOTE: TWS functionality supports two speakers at a time only.
USB/TF CARD Playback
Play audio from external storage devices like USB flash drives and TF memory cards.
- Insert the USB or TF card into the corresponding port/slot.
- Press the "Play/Pause" button ▶️ / ⏸️ to start or stop playback. Briefly press the ◀️ or ⏭️ buttons to skip to the previous or next song. Press and hold the ◀️ or ⏭️ buttons to decrease or increase the volume.
NOTE: When a USB flash drive or memory card is inserted, the unit automatically switches to USB/memory mode and plays MP3 files. You can also manually select USB/memory mode by pressing the "MODE" button ?.
FM Radio
Tune into local FM radio stations.
- Press the MODE button ? to change to FM radio mode.
- Press and hold the "Play/Pause" button ▶️ / ⏸️ to automatically search for available FM channels.
- Once the scan is complete, use the ◀️ or ⏭️ buttons to search for previous or next stations. Press and hold the ◀️ or ⏭️ buttons to decrease or increase the volume.
NOTE: During the station scan, the speaker will pre-record all found stations into memory. The scan may take several minutes and should not be interrupted.
AUX INPUT
Play audio from external devices without Bluetooth® capabilities via the auxiliary input.
- Insert the included auxiliary audio cable into the AUX input on the speaker.
- Connect the other end of the audio cable to the external media device's AUX input.
- Press the "Play/Pause" button ▶️ / ⏸️ to start or stop playback. Press and hold the ◀️ or ⏭️ buttons to decrease or increase the volume.
NOTE: When an external media device is connected via AUX, you can enter AUX mode by pressing the "MODE" button ? to cycle through modes.
Charging
To charge the speaker, plug the included adapter into the speaker's DC port. A red light will illuminate to indicate charging. The red light will turn off when charging is complete.
Troubleshooting
| Fault | Possible Cause | Solution |
|---|---|---|
| No sound | 1. No input sound source. 2. Volume is too low. | 1. Use a better music signal. 2. Adjust volume. |
| Distortion of sound | 1. Volume too high. 2. Speaker may be damaged. | 1. Turn down the volume. 2. If speaker is damaged, repair or replace it. |
| Karaoke does not work | 1. Microphone plug is not fully inserted. 2. Microphone switch is not on. 3. Microphone volume knob is at the lowest position. | 1. Plug microphone properly into the socket. 2. Turn on microphone switch. 3. Adjust microphone volume properly. |
| MP3 does not play | 1. The song format in the USB disc is incorrect. 2. Improper operation has caused a process disorder. 3. USB disc is disconnected. | 1. Transform song format into MP3 format. 2. Reboot the machine. 3. Insert USB disc properly. |
Specifications
| Speaker | 8" Woofer + 1" Tweeter |
| Wireless Source | Bluetooth® |
| Feature Function | TWS |
| Knobs | Microphone Volume, Microphone Echo, Bass Adjustment, & Treble Adjustment |
| Display Type | LED |
| Media Inputs | USB Port, Micro SD Card Slot, AUX, MIC |
| Radio Tuner | FM |
| Lighting Effects | Full Panel LED Disco Light |
| Power Source | 3.7V 3000mAh Rechargeable Battery |
| Battery Type | Built-in Lithium Rechargeable |
| Accessories Included | User Manual, Remote Control, Power Adapter, Wired Microphone |
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Caution on Modifications: Any changes or modifications not expressly approved by the grantee of this device may void the authority granted by the FCC to operate the equipment.
Support
For assistance with your device, consult this manual, visit www.naxa.com for the latest news and documentation, or contact Naxa Technical Support:
Naxa Technical Support
2320 East 49th St.
Vernon, CA 90058
(866) 411-6292
http://www.naxa.com/supportcenter/
