1. Product Parameter
Name: Magnetic Wireless Fast Charging Power Bank 20W
Model: PPCXW10
Material: ABS+PC
Capacity: 10000mAh/37Wh (2.7V)
Rated Capacity: 5800mAh (5V/2.4A)
Energy Conversion Rate: ≥75%
Type-C Input: 5V=2.4A, 9V=2A, 12V=1.5A
Wireless Output: 15W
USB Output: 5V=2.4A, 9V=2A, 12V=1.5A
Total Output: 5V=2.4A
Product size: 146.7x71.3x16.9mm
Product weight: About 229g
2. Packing List
- User Manual *1
- Power Bank *1
3. Product Description
This product is a portable charging device designed to charge mobile phones and other digital devices. It supports both magnetic wireless charging and wired charging capabilities.
4. Operation Instructions
4.1 Power Bank Operation
To turn on the power bank ?, press the power button once. The LED indicator will illuminate to show the power status.
4.2 Charging the Power Bank
Connect the USB-C port ? of the power bank to a power adapter using a compatible cable. The LED indicator will display the charging progress.
4.3 Wireless Charging
Place your mobile phone onto the designated wireless charging area ⚡️ on the power bank. Ensure the device is properly centered for optimal charging. The LED indicator will confirm that wireless charging has commenced.
4.4 Charging Mobile Phones or Other Digital Devices
Connect your mobile phone or digital device to the power bank using a suitable USB cable (e.g., USB-C to USB-C, or USB-A to your device's charging port).
5. Tips
- Please read all instructions and warnings ⚠️ carefully before using this product.
- Use only certified chargers and cables for charging the power bank and connected devices.
- Avoid exposing the product to extreme temperatures (hot or cold).
- Do not attempt to disassemble or repair the product yourself.
- Keep the product away from water and moisture.
- For wireless charging ⚡️, ensure your phone case is not too thick and does not contain metal objects, as this may interfere with charging. Proper alignment of the device on the charging pad is crucial for efficient power transfer.
6. Statement on Toxic and Hazardous Substances in Electronic Information Products
This product is compliant with the European Union's Restriction of Hazardous Substances (RoHS) and End-of-Life Vehicles (ELV) directives.
This form is compiled in accordance with SJ/T 11364.
The content of toxic and harmful substances in all homogeneous materials of the part is compliant with EU RoHS 2.0 directive (2011/65/EU).
The product complies with the effective environmental protection "use-life" period of 50 years.
Table: Toxic and Hazardous Substances and Elements
| Element | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| PCB | O | O | O | O | O | O |
| Battery | X | O | O | O | O | O |
| Casing | O | O | O | O | O | O |
| Electronic components | O | O | O | O | O | O |
Note: 'X' indicates that the content of the toxic and harmful substance in at least one homogeneous material of the part exceeds the limit concentration. 'O' indicates that the content of the toxic and harmful substance in all homogeneous materials of the part is below the limit concentration.
Environmental Compliance and Certifications
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference ⚠️, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.
Address: 6/F, Building B, Baseus Intelligence Park, No. 2008, Xuegang Rd, Bantian Street, Longgang District, Shenzhen, China.
Website: www.baseus.com
Model: PPCXW10
P/N: 2AY37-PPCXW10
Made in China.
[CE certified] [FCC certified] [RoHS compliant] [WEEE symbol]
Product Information and Version History
This section details product specifications and revision history.
Product Information
| Item | Details |
|---|---|
| Product No. | PPCXW10 |
| Product Name | Magnetic Wireless Fast Charging Power Bank 20W |
| Material | ABS+PC |
Version History
| Version | Date | Description | Editor | Reviewer |
|---|---|---|---|---|
| POAO | 2021-12-29 | Initial Release | 王东明 | 初版本 |
Packaging Area Legal Responsibility Statement
This section outlines the responsibilities related to the product packaging.
| Item | Details |
|---|---|
| Product Name | Magnetic Wireless Fast Charging Power Bank 20W |
| Color/Appearance Information | 100G packaging beautiful white 90*95MM double-sided printing 1 page |
| Quality Inspector | [Signature/Name] |
| Quality Engineer | [Signature/Name] |
| Designer | [Signature/Name] |
| Approver | [Signature/Name] |
