MEAN WELL ELG-20 0 Series Constant Voltage Current LED Driver Installation Guide

Installation Guide for MEAN WELL models including: ELG-200-12, ELG-200-24, ELG-200-36, ELG-200-42, ELG-200-48, ELG-200-54, ELG-20 0 Series Constant Voltage Current LED Driver, ELG-20 0 Series, Constant Voltage Current LED Driver, Voltage Current LED Driver, Current LED Driver, LED Driver
ELG-200

欧诗全

MEAN-WELL USA, INC. - РКС Компоненти - РАДІОМАГ
File Info : application/pdf, 13 Pages, 929.24KB
elg-200-spec
E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

User's Manual



    IP65 IP67

          

8


IS 15885(Part 2/Sec13)

THOMAS SAMUEL

THOMAS SAMUEL

R-41027766 Note.13

 
     

 
      

 

    



{


 







 
A 

 Dx 

   

  

Downloaded from Arrow.com.

     
  

   

 


File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

SPECIFICATION

MODEL

ELG-200-12

ELG-200-24

ELG-200-36

ELG-200-42

DC VOLTAGE

12V

24V

36V

42V

CONSTANT CURRENT REGION Note.2 6 ~ 12V

RATED CURRENT

16A

200VAC ~ 305VAC

RATED POWER

192W 100VAC ~ 180VAC

12 ~ 24V 8.4A
201.6W

18 ~ 36V 5.55A
199.8W

21 ~ 42V 4.76A
199.9W

144W

150W

149.76W

149.94W

RIPPLE & NOISE (max.) Note.3 150mVp-p

200mVp-p

250mVp-p

250mVp-p

OUTPUT

VOLTAGE ADJ. RANGE

Adjustable for A/AB-Type only (via built-in potentiometer)

11.2 ~ 12.8V

22.4 ~ 25.6V

33.5 ~ 38.5V

CURRENT ADJ. RANGE

Adjustable for A/AB-Type only (via built-in potentiometer)

8 ~ 16A

4.2 ~ 8.4A

2.78 ~ 5.55A

VOLTAGE TOLERANCE Note.4 ±3.0%

±2.0%

±2.0%

LINE REGULATION

±0.5%

±0.5%

±0.5%

LOAD REGULATION

±2.0%

±0.5%

±0.5%

SETUP, RISE TIME Note.6 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC

HOLD UP TIME (Typ.)

10ms/ 230VAC 10ms/ 115VAC

39 ~ 45V
2.38 ~ 4.76A ±2.0% ±0.5% ±0.5%

VOLTAGE RANGE

100 ~ 305VAC 142 ~ 431VDC Note.5 (Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE POWER FACTOR

47 ~ 63Hz
PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

ELG-200-48 48V 24 ~ 48V 4.16A
199.68W
149.76W 250mVp-p
44.8 ~ 51.2V
2.08 ~ 4.16A ±2.0% ±0.5% ±0.5%

ELG-200-54 54V 27 ~ 54V 3.72A
200.88W
150.12W 350mVp-p
50 ~ 57V
1.86 ~ 3.72A ±2.0% ±0.5% ±0.5%

TOTAL HARMONIC DISTORTION

THD< 20%(@load50%/115VC,230VAC; @load75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section)

INPUT

EFFICIENCY (Typ.)

90%

92%

92%

92.5%

93%

93%

AC CURRENT INRUSH CURRENT(Typ.)

1.8A / 115VAC 1.2A / 230VAC 1.0A/277VAC COLD START 60A(twidth=510s measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 277VAC

NO LOAD / STANDBY

No load power consumption <0.5W for Blank / A / Dx / D-Type

POWER CONSUMPTION Note.7 Standby power consumption <0.5W for B / AB / DA-Type

OVER CURRENT
SHORT CIRCUIT PROTECTION
OVER VOLTAGE
OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION

SAFETY STANDARDS

DALI STANDARDS

SAFETY & WITHSTAND VOLTAGE

EMC

ISOLATION RESISTANCE

EMC EMISSION

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

Hiccup mode, recovers automatically after fault condition is removed

13.5 ~ 18V

27 ~ 34V

42 ~ 49V

47 ~ 54V

54 ~ 63V

60 ~ 67V

Shut down output voltage, re-power on to recover

Shut down output voltage, re-power on to recover

Tcase=-40 ~ +90 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section)

Tcase=+90

20 ~ 95% RH non-condensing

-40 ~ +90, 10 ~ 95% RH

±0.03%/ (0 ~ 50)

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

UL8750(type"HL"), CSA C22.2 No. 250.13-12;IEC/BS EN/EN/AS/NZS 61347-1, IEC/BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384; EAC TP TC 004;BISIS15885(for 12/12A/12B/12DA/24/24A/24B/24DA/36/36A/36B/42A/42B/48/48A/48B/54A/54B only); GB19510.14,GB19510.1; IP65 or IP67;KC61347-1,KC61347-2-13 approved

Compliance to IEC62386-101,102,(207 by request) for DA Type only

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH

Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load50%) ;BS EN/ EN61000-3-3;GB17625.1,GB17743; EAC TP TC 020; KC KN15,KN61547

EMC IMMUNITY

Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 020; KC KN15,KN61547

MTBF

826.7K hrs min. Telcordia SR-332 (Bellcore) ; 200.8Khrs min. MIL-HDBK-217F (25)

OTHERS DIMENSION

244*71*37.5mm (L*W*H)

PACKING

1.22Kg; 12pcs / 15.2Kg / 0.72CUFT

NOTE

 









      . 


















Downloaded from Arrow.coPmro.duct Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

Block Diagram

PFC fosc : 50~120KHz PWM fosc : 60~130KHz

EMI FILTER

I/P

&

RECTIFIERS

PFC CIRCUIT

POWER

RECTIFIERS

Vo+

SWITCHING

& FILTER

Vo-

O.L.P.

O.T.P. PFC CONTROL

O.L.P.

PWM & PFC CONTROL

DETECTION CIRCUIT
O.V.P.

CASE :Protective Earth

DRIVING METHODS OF LED MODULE

 This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

100

Vo(%)

50 (min.)

(A) Constant
Voltage area

(B) Constant Current area

(C) Hiccup Protection

50

100

Io(%)

Typical output current normalized by rated current (%)

In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

DIMMING OPERATION

ACN(Blue) ACL(Brown)

ELG-200

Vo-(Black) Vo+(Red) DIM+(Purple)* DIM-(Pink)**

 3 in 1 dimming function (for B/AB-Type)
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.)

* DIM+ for B/AB-Type DA+ for DA-Type PROG+ for D2-Type
* *DIM- for B/AB-Type DA- for DA-Type PROG- for D2-Type

 Applying additive 0 ~ 10VDC

100%

90%

Vo+ +

80%

+

70%

Output current (%)

Vo-

60%

-

50%

DIM+ +

40%

Additive Voltage

30%

-

20%

DIM-

10%

"DO NOT connect "DIM- to Vo-"

0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input: Additive voltage

 Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

Vo+ +

+

Vo-

-

DIM+

Additive PWM signal DIM-

"DO NOT connect "DIM- to Vo-"

Output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input

 Applying additive resistance:

100%

Output current (%)

Vo+ +
VoDIM+

90%

+

80%

70%

-

60%

50%

40%
Additive Resistance
30%

DIM-

20%

"DO NOT connect "DIM- to Vo-"

10%

0%

Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N

(N=driver quantity forsynchronizeddimmingoperation)

Dimming input: Additive resistance

Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.

2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

 DALI Interface (primary side; for DA-Type) Apply DALI signal between DA+ and DA-. DALI protocol comprises 16 groups and 64 addresses. First step is fixed at 8% of output.
 Smart timer dimming function (for Dxx-Type by User definition) MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14 consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed, please contact MEAN WELL for details.
Ex :  D01-Type: the profile recommended for residential lighting

Set up for D01-Type in Smart timer dimming software program:

T1

T2

T3

T4

TIME**

06:00

07:00

11:00

---

LEVEL** 100%

70%

50%

70%

Dimming Level(%)

Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100% starting from 6:00pm. [2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.
Ex:  D02-Type: the profile recommended for street lighting

Set up for D02-Type in Smart timer dimming software program:

TIME** LEVEL**

T1 01:00 50%

T2 03:00 80%

T3 8:00 100%

T4

T5

11:00

---

60%

80%

Dimming Level(%)

Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance: [1] The power supply will switch to the constant current level at 50% starting from 5:00pm. [2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on. [5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

Ex:  D03-Type: the profile recommended for tunnel lighting

Set up for D03-Type in Smart timer dimming software program:

T1

T2

T3

TIME**

01:30

11:00

---

LEVEL** 70%

100%

70%

Dimming Level(%)

Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance: [1] The power supply will switch to the constant current level at 70% starting from 4:30pm. [2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on. [3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11

LOAD (%)

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

OUTPUT LOAD vs TEMPERATURE(Note.10)

100
80 230VAC input only
60
40
20

110VAC

others 12V

LOAD (%)

100

80 230VAC input only
60
40
20

110VAC

-40

-25 0 10

20

30

50

60

70 (HORIZONTAL)

AMBIENT TEMPERATURE,Ta ()
 If ELG-200 operates in Constant Current mode with the rated current, the maximum workable Ta is 50 for 12V-model whereas 60 for other models.

-40 -25 0

20

45

55

65

75

90 (HORIZONTAL)

Tcase ()

STATIC CHARACTERISTIC
100 90 80 75 70 60 50 40
100 120 140 160 180 200 240 250 260 270 280 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.

PF

POWER FACTOR (PF) CHARACTERISTIC
 Tcase at 80 Constant Current Mode

1

0.98

0.96

0.94

0.92

277V(200W)

0.9

230V(200W)

0.88

115V(150W)

0.86

0.84

50%

60%

70%

80%

90%

100%

LOAD

TOTAL HARMONIC DISTORTION (THD)

 48V Model, Tcase at 80

18%

16%

14%

12%

277V(200W)

230V(200W)

10%

115V(150W)

8%

6%

4%

50%

60%

70%

80%

90% 100%

LOAD

EFFICIENCY(%)

EFFICIENCY vs LOAD
ELG-200 series possess superior working efficiency that up to 93% can be reached in field applications.  48V Model, Tcase at 80

96 94 92 90 88 86 84 82 80
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

277V(200W) 230V(200W) 115V(150W)

LOAD

THD LOAD (%)

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

LIFETIME

LIFETIME(Kh)

120

100

80

60

40

20

0

20

30

40

50

60

70

80

90

Tcase( )

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

MECHANICAL SPECIFICATION
 Blank-Type (for 12V model)

244

233

300±20

220

CASE NO.: 262A Unit:mm
300±20

ACN(Blue) ACL(Brown)

SJOW 17AWGx2C &H05RN-F 1.0mm2

4-4.5

tc

90

tc : Max. Case Temperature

SJTW 14AWGx2C

Vo-(Black) Vo+(Red)

71 53.8 32 37 37.5

 Blank-Type (for other models)

244

233

300±20

220

ACN(Blue) ACL(Brown)

SJOW 17AWGx2C &H05RN-F 1.0mm2

tc

90

4-4.5
tc : Max. Case Temperature

300±20
Vo-(Black) Vo+(Red) SJOW 17AWGx2C &05RN-F 1.0mm2

71 53.8 32 37 37.5

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

 A-Type (for 12V model)
244

233

300±20

220

300±20

71 53.8

ACN(Blue) ACL(Brown)

SJOW 17AWGx2C &H05RN-F 1.0mm2

tc

90

4-4.5
tc : Max. Case Temperature

SJTW 14AWGx2C

Vo-(Black) Vo+(Red)

32 37 37.5

21.01

 A-Type (for other models)

300±20

ACN(Blue) ACL(Brown)

SJOW 17AWGx2C &H05RN-F 1.0mm2

71 53.8

14.5 38.5

244 233 220

tc

90

4-4.5
tc : Max. Case Temperature

300±20
Vo-(Black) Vo+(Red) SJOW 17AWGx2C &05RN-F 1.0mm2

32 37 37.5

21.01

Downloaded from Arrow.com.

14.5 38.5

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

 AB-Type (for 12V model)

300±20

ACN(Blue) ACL(Brown)

SJOW 17AWGx2C &H05RN-F 1.0mm2

71 53.8

244 233 220

tc

90

32

4-4.5
tc : Max. Case Temperature

300±20 SJTW 14AWGx2C UL2517 20AWGx2C

Vo-(Black) Vo+(Red) DIM+(Purple)* DIM-(Pink)**

37 37.5

21.01

 AB-Type (for other models)

300±20

ACN(Blue) ACL(Brown)

SJOW 17AWGx2C &H05RN-F 1.0mm2

71 53.8

14.5 38.5

244 233 220

tc

90

32

4-4.5
tc : Max. Case Temperature

300±20 SJOW 17AWGx2C &05RN-F 1.0mm2 UL2517 20AWGx2C

Vo-(Black) Vo+(Red) DIM+(Purple)* DIM-(Pink)**

37 37.5

21.01

Downloaded from Arrow.com.

14.5 38.5 File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

 B/DA/D2-Type (for 12V model)

300±20

ACN(Blue) ACL(Brown)

SJOW 17AWGx2C &H05RN-F 1.0mm2

244 233 220

tc

90

4-4.5
tc : Max. Case Temperature

300±20

SJTW 14AWGx2C UL2517 20AWGx2C

Vo-(Black) Vo+(Red) DIM+(Purple)* DIM-(Pink)**
* DIM+ for B-Type DA+ for DA-Type PROG+ for D2-Type
* *DIM- for B-Type DA- for DA-Type PROG- for D2-Type

71 53.8 32 37 37.5

 B/DA/D2-Type (for other models)

300±20

ACN(Blue) ACL(Brown)

SJOW 17AWGx2C &H05RN-F 1.0mm2

244 233 220

tc

90

4-4.5
tc : Max. Case Temperature

300±20 SJOW 17AWGx2C &05RN-F 1.0mm2 UL2517 20AWGx2C

Vo-(Black) Vo+(Red) DIM+(Purple)* DIM-(Pink)**
* DIM+ for B-Type DA+ for DA-Type PROG+ for D2-Type
* *DIM- for B-Type DA- for DA-Type PROG- for D2-Type

71 53.8 32 37 37.5

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11

E L G - 2 0 0 144~200W Constant Voltage + Constant Current LED Driver

series

 3Y Model (3-wire input)

244

233

300±20

220

71 53.8 32

AC/N(Blue) AC/L(Brown) PE (Green/Yellow) SJOW 17AWGx3C
&H05RN-F 1.0mm2

tc

90

4-4.5
tc : Max. Case Temperature

 Note1: Please connect the case to PE for the complete EMC deliverance and safety use.  Note2: Please contact MEAN WELL for input wiring option with PE.

SJOW 17AWGx2C &05RN-F 1.0mm2

INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html

Downloaded from Arrow.com.

File Name:ELG-200-SPEC 2022-02-11
ELG-200

欧诗全

References
