Smart ECG Temperature Watch User Guide
Thank you for choosing this smart watch. This watch will provide higher help and enjoyment for your exercise and health. For your convenience, please read the instructions carefully and follow the steps in the instructions.
Blood oxygen interface (SpO2)
Switch to the blood oxygen test interface to enter the blood oxygen real-time detection and measurement data. Data can be updated to the APP synchronously, and a test report is available.
Respiration rate interface (Rr)
Switch to the respiratory rate test interface to enter real-time detection and monitoring of respiratory rate. Data can be updated to the APP synchronously, and a test report is available.
Sport mode
Click the sport mode interface to enter the sport mode. There are multiple sport modes to choose from. Click the exercise icon to enter the corresponding exercise mode detection. Swipe up and down to switch sports modes. Click to start calculation, swipe right to exit the current sport mode.
Available sport modes include: Run, Cycling, Pingpong, Fitness, Basket.
Weather information
The weather page displays current weather, air quality information, and tomorrow's conditions. Weather information requires a connection to the smart phone to obtain data. If disconnected for a long time, the weather information will not be updated. Note: Phone settings need to have positioning turned on.
Sleep monitoring function
When you fall asleep, your watch automatically determines that you are in sleep detection mode. It automatically detects how long you've been asleep, light sleeping, and deep sleeping all night. It calculates the quality of your sleep and updates your sleep data to the APP synchronously. Note: Wear your watch to sleep before you have sleep data.
Stopwatch
Tap the stopwatch to enter the stopwatch function. Swipe right to exit.
Camera
In the connected state, tap the camera icon to remotely take pictures with the mobile phone. Click to take a photo and swipe right to exit.
Information
Click on the message icon to view the content of the message. Scroll up and down to turn pages. Swipe right to exit.
About
Click the about icon to display the device model name and the last four digits of the Bluetooth name.
Brightness
Click the brightness icon to freely select the screen brightness.
Watch Quick Instructions
Parts Introduction
- 2 back electrodes / temperature sensing
- Side electrode
- Power on/off button
- Charging contacts
- Touch screen
Instruction for Charging
The watch needs to be charged and activated before first use. Use the equipped magnetic charging cable and attach it to the metal points on the back of the watch. Connect the other end of the charging cable to a USB charging head or computer USB port.
Install Watch APP
Scan the QR code or search major application markets to download and install the "SmartHealth" app. Device requirements: iOS 9.0 and above; Android 4.4 and above, supporting Bluetooth 4.0.
To bind the device:
- Open the mobile client and set up personal information.
- Switch to the "Device" page and click on "Bind Device".
- Click your device in the list of scanned devices.
- Binding completed.
Main Function Interface
Main interface/dial
On the main interface, long press the touch screen or click "theme selection" in the APP menu to switch the main interface/dial. The dial has 5 styles.
On the main interface, press the side button or swipe up to enter the function page, and then press the side button or swipe down to return to the main interface.
Accessible functions include: Temp, ECG, Timer, Sport, Bp (Blood Pressure), Weather, Camera, Hr (Heart Rate), SpO2 (Blood Oxygen), Sleep.
Pedometer/Distance/Calories
View steps, distance, and calories burned in real-time. Data can synchronize with the app to view motion data.
Other Features
Raise your wrist
Tap the wrist lift icon to enter; you can choose to open or close the wrist lift function.
Reset
Click the reset icon to enter and restore the factory settings of the watch.
Shutdown
Click the shutdown icon to enter and power off the watch.
Other feature reminders
The reminder function requires setting the reminder switch on the APP side and keeping the phone and watch connected successfully via Bluetooth for message vibration reminders.
ECG detection
Detect ECG by clicking "start" on the APP. It will enter automatic detection mode after starting. Press your finger against the side electrode of the watch. Please do not move your finger and stand still.
Body temperature
Switch to the temperature test interface to enter real-time temperature detection. Monitoring data can be updated to the APP synchronously, and a test report is available. Note: When testing body temperature, the bottom temperature sensor must be in full contact with the skin (tested after 10 minutes of wearing). Body temperature testing can be affected by environmental temperature differences, serving only as a warning reminder. For details, please refer to professional medical equipment and doctor diagnosis.
Heart rate monitoring
Switch to the heart rate monitor interface for real-time heart rate monitoring. Measurement data can be synchronized with the APP in real-time with a test report.
ECG
Long press the side electrode on the ECG test interface. Ensure the three electrodes (back and side) are in full contact with the skin. The test report needs to be viewed in the APP.
Blood pressure monitoring
Switch to the blood pressure monitor interface to enter real-time monitoring. Measurement data can be synchronized with the APP in real-time with a test report. Note: When measuring blood pressure, please maintain the correct posture. Test results are for reference only and cannot be used as medical data.
Precautions
- Do not use an adapter with a current over 2A. Charging time is around 2-3 hours.
- Do not charge after the device has been water damaged.
- This is an electronic monitoring product; data received from it cannot be used as a medical basis.
- Blood pressure testing tips:
- Keep your body relaxed and still while testing.
- Keep the device at the same height as your heart, and do not talk while testing.
