Key Features
- Single AMD EPYC™ 7003/7002 Series Processor (Supports AMD 3D V-Cache™ Technology with BIOS v2.3+)
- Up to 2TB Registered ECC DDR4 3200MHz SDRAM across 8 DIMMs, 8-channel memory bus
- Expansion Slots: 5x PCI-E 4.0 x16, 2x PCI-E 4.0 x8
- M.2 Interface: 2x PCI-E 4.0 x4 (Form Factor: 2280, 22110, M-key)
- Storage: 2x M.2, 2x SlimSAS x8 (each supporting 8 SATA3 or 2 NVMe)
- Networking: Dual 10GBase-T LAN via Broadcom BCM57416
- Integrated Graphics: ASPEED AST2500 BMC
- USB Connectivity: Up to 6 USB 3.0 ports (4 rear, 2 via header)
- Fan Headers: 7x PWM 4-pin fan headers with tachometer status monitoring
Note: The visual representation of the motherboard may show optional configurations. Refer to the parts list for standard included components.
Specifications
Product SKUs
- MBD-H12SSL-NT
- H12SSL-NT
- MBD-H12SSL-NT-O
- H12SSL-NT (Retail Pack)
Physical Stats
- Form Factor: ATX
- Dimensions: 12" x 9.6" (30.5cm x 24.4cm)
Processor/Chipset
- CPU: Single AMD EPYC™ 7003/7002 Series Processor (Supports AMD 3D V-Cache™ Technology with BIOS v2.3+)
- Socket: SP3
- Cores: Up to 64 Cores
- Chipset: System on Chip
System Memory
- Memory Capacity: 8 DIMM slots
- Supported Memory: Up to 2TB Registered ECC DDR4 3200MHz SDRAM
- Memory Bus: 8-channel
- Memory Type: DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
- DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
- Memory Voltage: 1.2V
- Error Detection: Corrects single-bit errors; Detects double-bit errors (using ECC memory)
On-Board Devices
- SATA: SATA3 (6 Gbps)
- IPMI: Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2500 BMC
- Network Controllers: Dual 10GBase-T LAN via Broadcom BCM57416; 1 Realtek RTL8211F PHY (dedicated IPMI)
- VGA: ASPEED AST2500 BMC
Input/Output
- SATA/NVMe Hybrid: 2 SlimSAS x8 (each supporting 8 SATA3 or 2 NVMe)
- LAN: Dual 10GBase-T LAN ports; 1 RJ45 Dedicated IPMI LAN port
- USB: 6 USB 3.0 ports (4 rear + 2 via header)
- VGA: 1 VGA port
- Others: 1 COM port (rear); 1 TPM 2.0 header
Expansion Slots & Chassis Compatibility
The H12SSL-NT motherboard is designed for compatibility with various chassis types:
1U Chassis
2U Chassis
- SC213BAC8-R1K23LPB [Details]
- SC216BE1C4-R1K23LPB [Details]
- SC825MBTQC-R802LPB [Details]
- SC825TQC-R802LPB [Details]
- SC826BE1C4-R1K23LPB [Details]
- SCLA26AC12-R920LP1 [Details]
3U Chassis
Mid-Tower Chassis
- SC732i-903B
Tower/4U Chassis
System BIOS
- BIOS Type: AMI 256Mb SPI Flash EEPROM
- BIOS Features: Plug and Play (PnP) ?, DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1
Management
Software
Power Configurations
- ACPI Power Management
- Power-on mode control for AC power loss recovery
CPU and System Monitoring
CPU
- Monitors CPU Core Voltages (+3.3V, +5V, +5V standby, +3.3V standby)
- CPU switching voltage regulator
- Supports system management utility
- VBAT
FAN
- Up to 7-fan status tachometer monitoring
- Up to 7 4-pin fan headers
- Dual Cooling Zone
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 7x Fan connectors
- I²C Temperature Sensing Logic
LED
- CPU / System Overheat LED
Other Features
- Chassis Intrusion Detection
- Chassis Intrusion Header
- UID
Operating Environment / Compliance
Environmental Specifications
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
