YESKAMO Wifi Floodlight Security Camera Quick User Guide

• Microphone ?: Captures audio.
• 4pcs Floodlight ?: Illuminates automatically at night when the PIR sensor is triggered, providing color video.
• 4pcs IR led: Infrared LEDs automatically activate in darkness for night vision.
• Speaker ?: Transmits sound.
• 3dBi Antenna ?: Receives Wi-Fi signal from the monitor.
• IR Cut Filter: Automatically switches between day and night modes.
• PIR Sensor: Detects motion within the monitoring area.
• Weatherproof IP66 Housing: Designed for outdoor use, with an operating temperature range of -20 °C (-4 °F) to 60 °C (140 °F).
• TF Card Slot: For inserting a TF card for video storage (Max support 128GB, FAT32 format). Note: Cameras in kits may not support TF card function.
• Reset button: Press and hold for approximately 5-10 seconds to restore the camera to factory settings.
• 2-Axis Mounting Bracket: Allows for adjustable installation angles and features a vandal-proof design with 360° swiveling and 90° up-down adjustment.
• Power-in Port ?: Connects to the provided 12V 1A power adapter.
• RJ45 Ethernet port: Used for pairing/matching code with the monitor if the camera loses connection, or for hardwiring the camera to the monitor/router for a stable signal (do not cut off).

• Screen Button: Press to turn the screen on/off. Recommended to keep the screen off when not in use for durability.
• Antenna ?: Releases a strong wireless signal from the Monitor.
• Audio-out: Connect a speaker ? here.
• HDMI video output: Connects to the HDMI input port of your TV/monitor (HDMI cable not included).
• Power Input ?: Connects to the provided 12V 3A adapter for power supply.
• WAN Port:
  • A: Connect to a router with an Ethernet cable for remote viewing.
  • B: Required when adding a new camera to the YESKAMO Monitor or if a camera loses its connection. Used to pair the camera with the Monitor.
• USB port: For USB mouse control, and for USB flash drives ? to back up video footage and upgrade the system.
• 3.5" Internal Hard Disk ?: Used to save video recordings from the NVR system.

1. Plug the camera into a power socket ? using the provided 12V 1A adapter.
2. Plug the monitor into a power socket ? using the provided 12V 3A adapter.
3. Connect a USB mouse to the monitor.
4. Optional: If you want to use an external TV/monitor, connect it to the monitor using an HDMI cable (not included).
5. Use an Ethernet cable to connect the WAN port of the monitor to the LAN port of your router. This step is necessary for remote viewing via the phone app ?. Skip if you only need local viewing on the monitor.

• User name: admin
• Password: No password (leave blank and click "OK" ✅ to log in).

1. Ensure NVR Monitor is ONLINE: Connect the monitor's WAN port to your router's LAN port with an Ethernet cable. Verify the status shows "ONLINE" (e.g., via Main Menu ➡️ Fast Network ➡️ Cloud (P2P) ➡️ ONLINE).
2. Download the Free App: Search for "YESKAMO" or "EseeCloud" in the App Store or Google Play.
3. Create an Account and Log In: Register using your email address or phone number and password. A verification code will be sent. Log in with your credentials.
4. Add Cloud ID:
   • Method A: In the app, tap the ➕ icon (top right or center) and scan the Cloud ID.
   • Method B: Tap the ➕ icon, select "Other ways to add" ➡️ "Input Device Cloud ID". Enter the default password (blank) and tap "Add" ✅ then "Complete" ✅.

Double-tap the screen on the monitor to view cameras anywhere, anytime.

The floodlight camera features a built-in PIR sensor and floodlights that automatically activate at night for true color video when suspicious activity is detected. You can customize the IR-Cut mode to disable the floodlight.

Steps to customize IR-Cut mode:

1. Double-click the desired camera channel to enter full-screen mode.
2. Right-click the mouse to enter the main menu ➡️ Color Adjust ➡️ IR-Cut mode.
3. Select one of the following modes: Infrared, Daylight, Night, Full Color, Smart Mode.

• Infrared: Black & White video; floodlight will never turn on.
• Daylight ☀️: Color video; floodlight will never turn on.
• Night ?: Black & White video; floodlight will never turn on.
• Full Color: Color video; floodlight always turns on at night.
• Smart: Color video when motion is detected and PIR is activated; otherwise, Black & White video. Floodlight activates to provide color video when someone passes by.

Use the two-way audio feature to communicate through the camera system.

• To hear audio from the camera side, turn on the "speaker" button ? (usually at the top right of the phone app).
• To speak to the camera side, tap the "microphone" button ? to enter the chat screen, then press and hold the "microphone" button.
• Tap the "hang up" button to return to the preview screen.

The system supports four types of PIR-activated alerts: Buzzer, Email, Phone App Notification, and IPC Alarm (Siren). You can customize these based on your requirements.

• Buzzer: The monitor will beep when motion is detected.
• Email alert: You will receive an email notification (refer to the full manual for setup).
• Phone app notification ?: You will receive a push notification on your phone app.
• IPC Alarm: You will hear a siren alarm ? from the camera side.

Example: Enabling IPC Alarm (Siren)

1. Right-click the mouse to enter the main menu ➡️ System Setup ➡️ Channel Setup ➡️ Video Detection.
2. Select the desired channel and click "Enable" ✅.
3. Check/enable "IPC Alarm" ?.
4. Click "Apply" ✅ to save the settings.

Cameras are typically paired with the monitor before shipping and auto-pair upon power-up. If a camera loses its connection or you wish to add a new camera, follow these pairing steps:

1. Bring the new camera close to the monitor.
2. Plug the camera into a power outlet ? using its provided 12V 1A power adapter.
3. Connect the camera to the monitor using an Ethernet cable. The WAN indicator light on the back of the monitor should turn on.
4. Right-click the mouse to enter the main menu ➡️ Video Manage.
5. In the Video Manage interface, the upper box shows camera information, and the lower box shows monitor channel information. If a channel status shows "IPC disconnect" ❌, "connect fail" ❌, or "different segment" ❌, select that channel, click "delete", and its status will change to "No video source".
6. Click "Search" in the upper box. A new IP address for the camera will appear. Click "match code" ✅.
7. The camera will begin connecting. A "Wifi add" interface will pop up.
8. Click "Exit" ❌ once the camera's IP address appears for that channel (typically in the 172.20.14.xx range).
9. The camera's picture should now appear on the monitor, and its channel status will show "connect success" ✔️ in the Video Manage interface.
10. You can now disconnect the Ethernet cable. Install the camera within the monitor's Wi-Fi range. Reconnect the Ethernet cable to your router if remote viewing is desired.

A hard drive is required for the monitor to save recordings. If your monitor did not come with a hard drive or you wish to upgrade, follow these installation instructions:

1. Remove the screws securing the back panel of the monitor.
2. Carefully detach the back panel from the monitor.
3. Hold the hard drive and the monitor panel. Align the four mounting holes on the hard drive with the corresponding holes on the monitor panel.
4. Secure the hard drive to the panel using the provided screws. Use a Philips screwdriver.
5. Connect the SATA power and data cables from the monitor to the corresponding ports on the hard drive.
6. Slide the monitor back panel into place and secure it with the Philips screws.