Product Overview
The NZXT H710i and H710 are ATX mid-tower computer cases designed for builders seeking a clean, modern aesthetic with excellent functionality. They offer ample space for components, robust cooling support, and intuitive cable management solutions.
The H710i model includes NZXT's Smart Device V2, which provides integrated RGB lighting control and fan management.
Package Contents
Your case package should contain the following items:
- NZXT H710i or H710 Computer Case
- Accessory Box containing:
- Various screws for component installation (e.g., motherboard screws, SSD screws, PSU screws) [screw]
- Zip ties or Velcro straps for cable management [tie]
- Motherboard standoffs (pre-installed or separate) [standoff]
- User Manual (this document)
- Optional: RGB LED strips (H710i only)
- Optional: Fan hub (H710i only)
Case Features
The H710/H710i features a minimalist design with premium materials.
Exterior Features
- Front Panel: Typically features a clean, solid panel with integrated air intake channels on the sides.
- Top Panel: Houses the front I/O ports (USB 3.1 Gen 1, USB 3.1 Type-C, audio jacks, power button) and ventilation. [port]
- Rear Panel: Includes expansion slots for graphics cards and motherboard I/O, plus mounting for a rear fan.
- Bottom Panel: Features a removable dust filter for the power supply unit (PSU) intake. [filter]
- Side Panels: Available in tempered glass (left side) and solid steel (right side). The tempered glass panel is secured with thumbscrews. [thumbscrew]
Interior Features
- Motherboard Tray: Supports ATX, Micro-ATX, and Mini-ITX motherboards. Includes pre-installed standoffs and cutouts for cable management. [motherboard]
- Drive Bays: Accommodates 2.5" SSDs and 3.5" HDDs. Specific configurations may vary.
- Cooling Support:
- Front: Up to 3 x 120mm or 2 x 140mm fans/radiators.
- Top: Up to 3 x 120mm or 2 x 140mm fans/radiators.
- Rear: 1 x 120mm or 1 x 140mm fan (one 120mm fan included).
- Cable Management: Features NZXT's signature cable routing channels, Velcro straps, and ample space behind the motherboard tray for clean builds. [cable]
- Power Supply Unit (PSU) Mount: Located at the bottom rear, supports standard ATX PSUs. [psu]
Installation Guide
Follow these steps for a successful build:
- Prepare the Case: Remove side panels. Install motherboard standoffs if not pre-installed.
- Install Motherboard: Carefully align the motherboard with the standoffs and secure it using the appropriate screws. [motherboard-screw]
- Install CPU and RAM: It is often easier to install the CPU and RAM onto the motherboard before placing it in the case.
- Install Graphics Card(s): Remove rear expansion slot covers and secure the graphics card(s) to the motherboard and case. [gpu]
- Install Storage Drives: Mount SSDs and HDDs into their respective bays using the provided screws. [drive]
- Install Power Supply Unit (PSU): Mount the PSU in its bay and secure it. Connect necessary cables to motherboard, CPU, GPU, and drives. [psu-cable]
- Connect Front Panel I/O: Connect the small cables from the front panel (power button, USB, audio) to the corresponding headers on the motherboard. Refer to your motherboard manual for header locations. [connector]
- Cable Management: Route all cables neatly behind the motherboard tray using the provided channels and ties. This improves airflow and aesthetics. [cable-management]
- Install Cooling Fans/Radiators: Mount any additional fans or liquid cooling radiators according to the cooling support specifications. [fan]
- Install Smart Device V2 (H710i only): Connect the Smart Device V2 to the motherboard (USB header) and power supply. Connect RGB strips and fans to the device. [smart-device]
- Final Checks: Double-check all connections and component installations.
- Reinstall Side Panels: Attach the tempered glass and solid side panels.
Specifications
| Feature | Specification |
|---|---|
| Model | H710i, H710 |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Dimensions (WxHxD) | 230mm x 505mm x 494mm (without feet) |
| Drive Bays | 2 x 3.5" HDD, 3 x 2.5" SSD |
| Cooling Support (Front) | 3 x 120mm or 2 x 140mm |
| Cooling Support (Top) | 3 x 120mm or 2 x 140mm |
| Cooling Support (Rear) | 1 x 120mm or 1 x 140mm (1 x 120mm included) |
| Radiator Support (Front) | Up to 280mm |
| Radiator Support (Top) | Up to 360mm |
| Radiator Support (Rear) | Up to 120mm |
| Clearance (CPU Cooler) | 185mm |
| Clearance (GPU) | 413mm |
| Front I/O Ports | 1 x USB 3.1 Gen 1, 1 x USB 3.1 Type-C, 1 x Audio In/Out |
Support and Warranty
For further assistance, troubleshooting, or warranty information, please visit the official NZXT support website.
