NZXT H6 Series Compact Dual-Chamber Mid-Tower Airflow Case

The NZXT H6 Series is a compact dual-chamber mid-tower PC case designed for optimal airflow, offering a balance of aesthetics and functionality for PC builders.

Exploded View

The case is comprised of several key components:

• 1. Top Panel
• 2. Tempered Glass Panel
• 3. Front I/O Module
• 4. Right Side Panel
• 5. HDD/SSD Cage
• 6. Front Intake Fans
• 7. Front Mesh Panel
• 8. Front Tempered Glass Panel

Accessory Box Contents

The accessory box contains various screws and mounting hardware:

• A. Hexagon Screw 6-32 x 6mm (x4)
• B. Screw 6-32 x 5mm (x17)
• C. Screw M3 x 5mm (x16)
• D. Screw KB5 x 10mm (x12)
• E. Flat head CB5 x 13.5mm (x8)
• F. Standoff 6-32 x 6+4mm (x1)
• G. Standoff Wrench (x1)
• H. Cable Ties (x10)

Component Identification

The primary components of the case are:

• 1. Top Panel
• 2. Tempered Glass Panel
• 3. Front I/O Module
• 4. Right Side Panel
• 5. HDD/SSD Cage
• 6. Front Intake Fans
• 7. Front Mesh Panel
• 8. Front Tempered Glass Panel

Accessory Identification

The included accessories are:

• A. Hexagon Screw 6-32 x 6mm
• B. Screw 6-32 x 5mm
• C. Screw M3 x 5mm
• D. Screw KB5 x 10mm
• E. Flat head CB5 x 13.5mm
• F. Standoff 6-32 x 6+4mm
• G. Standoff Wrench
• H. Cable Ties

Installation Steps Overview

The installation process involves several stages:

• Power supply installation
• Motherboard installation
• 3.5" HDD installation
• 2.5" HDD installation
• Fan installation
• Cable management

Cable Connections

The front panel I/O and internal connectors include:

• INTEL STANDARD F_PANEL HEADER
• USB 3.2 GEN 2 TYPE-C
• USB 3.2 GEN 1 TYPE-A
• HD AUDIO
• 4-PIN PWM FAN
• 5V ARGB (FOR FLOW RGB ONLY)

Clearances and Specifications

Buttons and I/O Ports

The front panel features the following:

• 1. Headset Jack
• 2. USB 3.2 Gen 2 Type-C
• 3. USB 3.2 Gen 1 Type-A
• 4. Power Button
• 5. Power LED

Cable Management System Features

The case is designed with cable management in mind:

• Routing for 8-PIN CPU POWER CABLE
• Dedicated FAN CABLE CHANNEL
• Routing for 24-PIN MOTHERBOARD POWER CABLE
• Routing for GPU POWER CABLE
• Routing for SATA CABLE
• MOTHERBOARD I/O OPENING
• BOTTOM FAN CABLE OPENING

Panel Removal

Instructions are provided for removing the case panels to access internal components.

Motherboard Installation

Guidance is offered for installing ATX, Micro-ATX, and Mini-ITX motherboards.

HDD/SSD Drive Installation

The case supports the installation of 2.5" SSDs and 3.5" HDDs.

Expansion Card Installation

Information is available for installing expansion cards into the available slots.

Power Supply Installation

Instructions are provided for installing the power supply unit (PSU).

Fan and Radiator Support

Fan & Radiator Installation

Details are provided for installing fans and radiators in various locations within the case.

Regulatory Compliance

This product complies with relevant harmonisation legislation, including EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU & (EU) 2015/863. It also adheres to UKCA Electromagnetic Compatibility Regulations 2016 and Restriction of Hazardous Substances Regulations 2012. Statements regarding REACH and FCC/ISED compliance are also included.

Environmental Compliance

NZXT is committed to environmental protection and complies with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). NZXT will comply with product take-back requirements at the end of life for NZXT-branded products sold into the EU.

NZXT Global Warranty Policy

NZXT provides a warranty for its products. For computer cases, the warranty length is 2 years. The warranty covers manufacturing defects for the original consumer. It excludes damage from misuse, accidents, unauthorized modifications, improper installation, and normal wear and tear. NZXT's liability is limited to repair or replacement of defective products. Implied warranties are limited to the specified warranty length. NZXT does not warrant that the product will meet specific user requirements.

Obtaining Support and Warranty Service

For questions or issues with NZXT products, customers can contact NZXT support via their website at support.nzxt.com or email service@nzxt.com. Proof of purchase is required for warranty service. An RMA (Return Merchandise Authorization) number may be required for returns. For more information about NZXT, visit nzxt.com.