LiftMaster myQ Home Bridge 819LMB

Safety Warnings

⚠️ WARNING: To reduce the risk of SEVERE INJURY:

• DO NOT enable the myQ® Home Bridge if operating either one-piece or swinging doors. To be enabled ONLY on a sectional door.

⚠️ WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Read instructions thoroughly BEFORE beginning.

If using this product with residential door openers, the product must be used only with door openers manufactured after 1993 that use photoelectric sensors located near the bottom of the door track that do not change the state of those photoelectric sensors to a low power mode.

NOTICE: This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device must be installed to ensure a minimum 20 cm (8 in.) distance is maintained between users/bystanders and device.

General Garage Door Safety:

• A child can be pinned under an automatic garage door. Death or serious injury can result.
• Never let a child walk or run under a moving door.
• Never let a child use door opener controls.
• Always keep the moving door in sight.
• This opener system is equipped with an unattended operation feature. The door could move unexpectedly.
• Do not enable Timer-to-close functionality if operating either one-piece or swinging garage doors. To be enabled ONLY when operating a sectional door.
• If a person is pinned, push the control button or use the emergency release.
• Test door opener monthly.

What's in the Box

The box contains:

• myQ Home Bridge: A rectangular device with three indicator lights (Blue LED, Green LED, Yellow LED) and the myQ logo.
• Power Adapter: A wall adapter with a cord and connector.
• Mounting bracket: A metal bracket for attaching the device.
• Hardware: Includes screws (5/32" x 1-1/2").
• Warning Label: A label with safety instructions.

Before You Start, You Must Have

• A router with 2.4GHz Wi-Fi®.
  Depiction of a Wi-Fi router.
• A mobile device connected to your home Wi-Fi network.
  Depiction of a smartphone.

Compatible Devices

• LiftMaster®, Chamberlain®, and Raynor® garage door openers with myQ® technology
• Craftsman® garage door openers with Smart Control or AssureLink™ Connectivity
• LiftMaster® and Chamberlain® versions of myQ Garage®, Smart Garage™ Hub and Smart Garage™ Control

Tips

• Keep any existing myQ devices plugged in.
• Do not delete existing devices from the myQ app.
• To control this HomeKit-enabled accessory, iOS 10.0 or later is recommended.
• Watch setup videos at www.LiftMaster.com/myQSupport.

myQ App Setup

1. Power the myQ Home Bridge by plugging it in. The blue LED will start blinking.
2. Download the myQ app or open the app if it is already installed.
3. Create an account or sign-in.
4. Press the "+" or gear [⚙️] icon and select myQ-nnn under Discovered Accessories/Devices.

Installation

1. Check the Wi-Fi signal in the garage, where the myQ Home Bridge will be mounted. Make sure you have two or more Wi-Fi bars.
2. NOTE: If there are signal strength issues, please visit https://www.LiftMaster.com/wifisupportvideos.
3. Install the myQ Home Bridge on the ceiling near the garage door opener, or in a convenient location in the garage within Wi-Fi range.
4. TIP: Wrap excess power adapter cable around the mounting bracket.
5. Plug it in and make sure the green LED turns on solid.
6. Attach the warning label to the wall next to the door control.

Need Help?

Go to: www.LiftMaster.com/myQSupport

Communication between iPhone, iPad, or iPod touch and the HomeKit-enabled myQ® device is secured by HomeKit technology and Security+ 2.0®.

Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later set up as a home hub.