Mitsubishi MSZ-FX09NL & MUZ-FX09NLHZ
9,000 BTU/H WALL-MOUNTED INDOOR UNIT
9,000 BTU/H H2I SUMO™ HYPER-HEATING INVERTER OUTDOOR UNIT
Product Overview
This document provides detailed specifications for the Mitsubishi Electric MSZ-FX09NL indoor unit and MUZ-FX09NLHZ outdoor unit, part of the Hyper-Heating Inverter series. These units offer efficient and powerful heating and cooling capabilities.
Indoor Unit Features
- 3D i-see Sensor®: Advanced sensor for thermal profiling and automatic temperature/airflow adjustment based on room occupancy and heat signatures.
- Dual Barrier Coating: Patented coating on heat pump surfaces to reduce contaminant collection, ensuring optimal airflow and easier maintenance.
- Dual Barrier Fusion: Patented coating on indoor unit vanes for enhanced cleanliness and odor reduction.
- Dual Vane: Allows independent setting of two vanes for customized airflow direction, enabling wide area coverage or zone-specific comfort.
- Econo Cool: Automatically adjusts airflow based on heat exchanger temperature to save energy while maintaining comfort.
- Multiple Control Options: Includes a back-lit handheld remote controller, comfort app, third-party interfaces, and wired/wireless controllers.
- Multiple Fan Speed Options: Low, Medium, High, Powerful, Auto.
- Powerful Mode: Temporarily adjusts set point and fan speed for rapid room temperature change.
- Quiet Operation: Indoor units are whisper quiet, and outdoor units operate as quietly as a typical conversation.
- Slim Design: Provides zone comfort control with a slim profile.
- Smart Dry+: Intelligently controls humidity with minimal over-cooling.
- Triple Action Filtration: Includes Microparticle, Electrostatic Enzyme, and optional Carbon-based Deodorizing Filters for air purification.
- Wi-Fi Enabled: Allows control via the Comfort app for temperature, fan speeds, modes, and schedules.
Outdoor Unit Features
- Blue Fin Coating: Anti-corrosion treatment on heat exchanger fins to protect against airborne contaminants, especially in coastal and industrial areas.
- H2i sumo™ Hyper-Heating INVERTER: Provides 100% heating capacity at -10°F and guaranteed operation down to -22°F.
- Hot-start Technology: Prevents cold air blasts by ensuring the fan only operates after the heat exchanger has warmed.
Specifications
Cooling at 95°F
Btu/h | W | Pints/h | % | |||
Maximum Capacity | 15,000 | |||||
Rated Capacity | 9,000 | |||||
Minimum Capacity | 2,500 | |||||
Maximum Power Input | 1,580 | |||||
Rated Power Input | 490 | |||||
Moisture Removal | 0 | |||||
Sensible Heat Factor | 1 | |||||
Power Factor [208V/230V] | 87/88 |
Heating at 47°F
Btu/h | W | % | ||
Maximum Capacity | 21,300 | |||
Rated Capacity | 12,000 | |||
Minimum Capacity | 3,100 | |||
Maximum Power Input | 2,130 | |||
Rated Power Input | 710 | |||
Power Factor [208V/230V] | 94/93 |
Heating at 17°F
Btu/h | W | |||
Maximum Capacity | 16,300 | |||
Rated Capacity | 7,700 | |||
Maximum Power Input | 2,000 | |||
Rated Power Input | 650 |
Heating at 5°F
Btu/h | W | |||
Maximum Capacity | 14,700 | |||
Maximum Power Input | 1,950 |
Heating at -5°F
Btu/h | W | ||
Maximum Capacity | 14,500 |
Heating at -10°F
Btu/h | W | ||
Maximum Capacity | 12,000 |
Heating at -22°F
Btu/h | W | ||
Maximum Capacity | 8,700 |
Efficiency
SEER2 | 33.1 | ||
EER2 | 18.35 | ||
HSPF2 [IV] | 13.3 | ||
COP at 47°F | 4.95 | ||
COP at 17°F at Maximum Capacity | 2.38 | ||
COP at 5°F at Maximum Capacity | 2.2 | ||
COP at -5°F at Maximum Capacity | 2.04 | ||
COP at -10°F at Maximum Capacity | 1.9 | ||
ENERGY STAR® Certified | Yes |
Electrical
Voltage, Phase, Frequency | VAC/VAC, Hz | 208/230, 1, 60 | ||
Guaranteed Voltage Range | VAC | 187-253 | ||
Voltage: Indoor - Outdoor, S1-S2 | VAC | 208/230 | ||
Voltage: Indoor - Outdoor, S2-S3 | V DC | 24 | ||
Short-circuit Current Rating [SCCR] | KA | 2 | ||
Recommended Fuse/Breaker Size (Outdoor) | A | 5 | ||
Recommended Wire Size [Indoor - Outdoor] | AWG | 14 |
Indoor Unit
Fan Motor Output | W | 1 | ||||||
Airflow Rate at Cooling, Dry | CFM | 198, 233, 311, 406, 526 | ||||||
Airflow Rate at Cooling, Wet | CFM | 168, 198, 264, 345, 447 | ||||||
Airflow Rate at Heating, Dry | CFM | 177, 247, 311, 406, 477 | ||||||
Sound Pressure Level [Cooling] | dB (A) | 20, 23, 29, 36, 44 | ||||||
Sound Pressure Level [Heating] | dB (A) | 20, 24, 29, 36, 42 | ||||||
Dual Barrier Coating on Heat Exchanger | Yes | |||||||
External Finish Color | Munsell 1.0Y 9.2/0.2 | |||||||
Unit Dimensions (W x D x H) | inch x inch x inch [mm x mm x mm] | 39-9/32 x 9-3/4 x 12 [998 x 247 x 305] | ||||||
Package Dimensions (W x D x H) | inch x inch x inch [mm x mm x mm] | 43-5/16 x 12-3/4 x 15-3/4 [1,100 x 330 x 400] | ||||||
Unit Weight | lbs [kg] | 31.40 [14.20] | ||||||
Package Weight | lbs [kg] | 36.40 [16.50] | ||||||
Fan Motor Type | DC Motor |
ODU Operating Temp. Range
°FDB, °FWB / °FDB, °FWB | °FDB | ||
Cooling Intake Air Temp [Maximum / Minimum] | 90, 73/67, 57 | ||
Heating Intake Air Temp [Maximum / Minimum] | 80/70 |
Outdoor Unit Specifications
A | Btu/h | W | CFM | dB (A) | ||||
MCA | 15 | |||||||
MOCP | 15 | |||||||
Fan Motor Output | 55 | |||||||
Airflow Rate Cooling | 1,815 | |||||||
Airflow Rate Heating | 1,321 | |||||||
Defrost Method | Reverse Cycle | |||||||
Coating on Heat Exchanger (Bluefin, Sea Coast) | Yes, No | |||||||
Sound Pressure Level, Cooling¹ | 49 | |||||||
Sound Pressure Level, Heating² | 49 | |||||||
Compressor Type | Twin Rotary | |||||||
Compressor Model | SRB140FQHMT | |||||||
Compressor Oil [Type // Charge] | Type // oz | RM68EH // 11.80 | ||||||
External Finish Color | Munsell 3Y 7.8/1.1 | |||||||
Base Pan Heater | Built-in | |||||||
Unit Dimensions (W x D x H) | inch x inch x inch [mm x mm x mm] | 31-1/2 x 11-1/4 x 28-1/8 [800 x 285 x 714] | ||||||
Package Dimensions (W x D x H) | inch x inch x inch [mm x mm x mm] | 37 x 15 x 35 [940 x 380 x 890] | ||||||
Unit Weight | lbs [kg] | 89 [40.4] | ||||||
Package Weight | lbs [kg] | 103.50 [46.90] | ||||||
Cooling Intake Maximum Air Temp [Maximum / Minimum*] | °FDB | 115/14 | ||||||
Cooling Thermal Lock-out / Re-start Temperatures** | °FDB | -4/0 | ||||||
Heating Air Temp [Maximum / Minimum] | °FDB, °FWB / °FDB, °FWB | 75, 65/-22, -23.8 | ||||||
Heating Thermal Lock-out / Re-start Temperatures** | °FDB | -34/-23 | ||||||
Type | R454B | |||||||
Pre-Charged Refrigerant Amount | Ibs, oz | 2, 12 | ||||||
Refrigerant | ||||||||
Maximum Pre-Charged Piping Length | ft [m] | 25 [7.50] | ||||||
Additional Refrigerant Charge Per Additional Piping Length | oz/ft | 0.22 | ||||||
Piping | ||||||||
Gas Pipe Size O.D. [Flared] | inch [mm] | 3/8 [9.52] | ||||||
Liquid Pipe Size O.D. [Flared] | inch [mm] | 1/4 [6.35] | ||||||
Maximum Piping Length | ft [m] | 65 [20] | ||||||
Maximum Height Difference | ft [m] | 40 [12] | ||||||
Maximum Number of Bends | 10 |
Indoor Unit Accessories
Category | Description | Model Number |
Remote Control | Lockdown Bracket for Wireless Handheld Remote Controllers | RCMKP1CB |
Wireless Remote Controller | MHK2 | |
Condensate | Blue Diamond (Slim Fascia Kit) Condensate Pump w/ Reservoir & Sensor | X86-011 |
Blue Diamond Advanced Mini Condensate Pump w Reservoir Sensor 208230V recommended | X87-721 | |
Blue Diamond MaxiBlue Advanced Mini Condensate Pump w Reservoir Sensor 110V up to 48000 BTUH recommended | X87-711 | |
Blue Diamond MegaBlue Advanced Condensate Pump w Reservoir Sensor | X87-835 | |
Blue Diamond MicroBlue Mini Condensate Pump 110/208/230V up to 18000 BTUH | X86-003 | |
Blue Diamond Sensor Extension Cable 15 Ft | C13-103 | |
Drain Pan Level Sensor Control | SS610E | |
Refco Condensate Pump 100-240 VAC | GOBI-II | |
Refco Condensate Pump 100-240 VAC up to 120000 BTUH | COMBI | |
Sauermann Condensate Pump | S130-230 | |
Control Interface | Airzone Wired Blueface Controller Black | AZZBSBLUEZEROCN |
Airzone Wired Blueface Controller White | AZZBSBLUEZEROCB | |
Wired Remote Controller | MAC-334IF-E | |
Airzone Wireless Lite Controller Black | AZZBSLITERN | |
Airzone Wireless Lite Controller White | AZZBSLITERB | |
Airzone Wireless Think Controller Black | AZZBSTHINKRN | |
Airzone Wireless Think Controller White | AZZBSTHINKRB | |
IT Extender for kumo station | PAC-WHS01IE-E | |
kumo station for the Comfort app | PAC-UKPRC001-CN-1 | |
M-Net I/O Control Interface for M-Series 2 | PAC-US445CN-1 | |
Procon BACnet and Modbus Interface | PAC-USWHS002-WF-2 | |
Thermostat Interface for 3rd Party Thermostats | PAR-42MAAUB | |
Wireless Interface Adapter for the Comfort app | PAC-SDW01RC-1 | |
Deluxe Wired MA Remote Controller 1 | PAR-42MAAUB | |
Simple Direct Wired Remote Controller | PAC-SDW01RC-1 | |
Simple MA Remote Controller 1 | PAC-YT53CRAU-J | |
Touch MA Wired Remote Controller 1 | PAR-CT01MAU-SB | |
Lineset | 15 x 1/4 x 15 3/8 Lineset Twin-Tube Insulation | MLS143812T-15 |
30 x 1/4 x 30 3/8 Lineset Twin-Tube Insulation | MLS143812T-30 | |
50 x 1/4 x 50 3/8 Lineset Twin-Tube Insulation | MLS143812T-50 | |
65 x 1/4 x 65 3/8 Lineset Twin-Tube Insulation | MLS143812T-65 | |
Remote Sensor | Remote Temperature Sensor for MFZ MLZ and MSZ models | M21EAA307 |
Wireless temperature and humidity sensor for the Comfort app | PAC-USWHS003-TH-1 | |
Filter | Electro Static Anti-allergy Enzyme Filter | MAC-2330FT-E |
Microparticle Filter | MAC-EMF515FT-E | |
Platinum Deodorizing Filter | MAC-3010FT-E | |
Disconnect Switch | 30A600VUL fits 2 X 4 utility box - Black | TAZ-MS303 |
30A600VUL fits 2 X 4 utility box - White | TAZ-MS303W | |
Power Supplies and Auxiliary Components | Backup Heat Relay Kit Adapter for CN24 or CN152 Connector | CN24RELAY-KIT-CM3 |
Outdoor Unit Accessories
Category | Description | Model Number |
Mini-Split Wire | 14 Gauge 4 wire Armored MiniSplit Cable 250 ft roll | SW144-250 |
14 Gauge 4 wire Armored MiniSplit Cable 50 ft roll | SW144-50 | |
14 Gauge 4 wire MiniSplit Cable 250 ft roll | S144-250 | |
14 Gauge 4 wire MiniSplit Cable 50 ft roll | S144-50 | |
16 Gauge 4 wire Armored MiniSplit Cable 250 ft roll | SW164-250 | |
16 Gauge 4 wire Armored MiniSplit Cable 50 ft roll | SW164-50 | |
16 Gauge 4 wire MiniSplit Cable 250 ft roll | S164-250 | |
16 Gauge 4 wire MiniSplit Cable 50 ft roll | S164-50 | |
Snow/Rain Diverter | Snow/Rain Diverter | SRD-1 |
Stand | 18 Single Fan Stand | QSMS1801M |
24 Single Fan Stand | QSMS2401M | |
Condenser Wall Bracket | QSWB2000M-1 | |
Condenser Wall Bracket - Stainless Steel Finish | QSWBSS | |
Outdoor Unit 3-14 inch Mounting Base Pair - Plastic | DSD-400P | |
Outdoor Unit Stand 12 High | QSMS1201M | |
Hail Guards | Hail Guard | HG-B4 |
Mounting Pad | Condensing Unit Mounting Pad 16 x 36 x 3 | ULTRILITE 1 |
Control/Service Tool | M- & P-Series Maintenance Tool Cable Set | M21EC0397 |
Maintenance Tool Interface | PAC-USCMS-MN-1 |
Indoor Unit Dimensions: MSZ-FX09NL
Diagrams showing the dimensions and piping details for the MSZ-FX09NL indoor unit are provided. Key dimensions include width, height, and depth, along with specific measurements for insulation, liquid line, gas line, and drain hose connections.
Outdoor Unit Dimensions: MUZ-FX09NLHZ
Diagrams illustrating the dimensions and installation requirements for the MUZ-FX09NLHZ outdoor unit are included. These show the unit's overall size, airflow paths, service panel access, and pipe joint specifications. Required clearances for installation are also indicated.
Notes on Specifications
Specifications are subject to change without notice. Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Related Documents
![]() |
Mitsubishi Electric MSZ-FX15NL & MUZ-FX15NLHZ: 15,000 BTU/H Hyper-Heating Inverter Air Conditioner Specifications Detailed features, technical specifications, and accessories for the Mitsubishi Electric MSZ-FX15NL indoor unit and MUZ-FX15NLHZ outdoor unit, a 15,000 BTU/H H2i Sumo Hyper-Heating Inverter system. |
![]() |
Mitsubishi Electric MSZ-HX09NL & MUZ-HX09NL Air Conditioner Specifications and Features Detailed specifications, features, and accessories for the Mitsubishi Electric MSZ-HX09NL Wall-Mounted Indoor Unit and MUZ-HX09NL Inverter Heat Pump Outdoor Unit, including performance data, dimensions, and electrical requirements. |
![]() |
Mitsubishi Electric M-Series Air Conditioners: Selection Guide Explore the Mitsubishi Electric M-Series air conditioners, featuring advanced technologies like Plasma Quad Plus for air purification, 3D i-see Sensor for intelligent airflow, and Dual Barrier Coating for unit cleanliness. This guide details various models including MSZ-RW, MSZ-LN, MSZ-AY, MSZ-AP, MSZ-E, MSZ-BT, MSZ-HR, MSZ-DW, and MSY-TP series, along with MFZ and MLZ cassette units. Learn about their heating performance, energy efficiency, and unique features designed for optimal comfort and air quality. |
![]() |
Mitsubishi Electric MSZ-WX18NL & MUZ-WX18NL Inverter Heat Pump System: Features and Specifications Comprehensive details on the Mitsubishi Electric MSZ-WX18NL wall-mounted indoor unit and MUZ-WX18NL inverter heat pump outdoor unit, including features, technical specifications, dimensions, and accessories. |
![]() |
Mitsubishi Electric Split-Type Air Conditioners Installation Manual Comprehensive installation manual for Mitsubishi Electric Split-Type Air Conditioners, including models MSZ-FX06NL, MSZ-FX09NL, MSZ-FX12NL, MSZ-FX15NL, MSZ-FX18NL, and MSZ-FX24NL. Covers safety precautions, installation procedures for indoor and outdoor units, pipe forming, drain piping, wiring, and specifications. |
![]() |
Mitsubishi Electric MSZ-FX18NL Indoor Unit & MUZ-FX18NLHZ Outdoor Unit HVAC System Comprehensive overview and specifications for the Mitsubishi Electric MSZ-FX18NL wall-mounted indoor unit and MUZ-FX18NLHZ Hyper-Heating Inverter outdoor unit, detailing features, performance, and dimensions. |
![]() |
Mitsubishi Electric MSZ-AY Inverter Air Conditioner with Wi-Fi Discover the Mitsubishi Electric MSZ-AY Inverter air conditioner, featuring high performance, energy efficiency, quiet operation, and advanced air purification with MELCloud Wi-Fi control. Ideal for comfortable and healthy living environments. |
![]() |
Mitsubishi Electric HyperCore Heat Pumps: Superior Performance in Cold Climates Discover Mitsubishi Electric's HyperCore heat pump technology, offering guaranteed full heating capacity even in extreme cold down to -15°C. Explore the LN Black Diamond Smart Series and KW RapidHeat Smart Series for efficient, comfortable home heating. |