Sealey - Leading Professional Tool & Workshop Equipment Supplier
User Manual for SEALEY models including: LED451 Super Beam 3500lm Rechargeable SMD LED 30W Pocket Light, LED451, Super Beam 3500lm Rechargeable SMD LED 30W Pocket Light, Rechargeable SMD LED 30W Pocket Light, SMD LED 30W Pocket Light, 30W Pocket Light, Pocket Light
Sealey LED451 Super Beam 3500lm Rechargeable SMD LED 30W Pocket Light » Product
Sealey LED451 Super Boost 3500lm Rechargeable SMD LED 30W Pocket Light | workshopping.co.uk
Super Beam 3500lm Rechargeable SMD LED 30W Pocket Light - Vinny Byrne
File Info : application/pdf, 2 Pages, 427.32KB
DocumentDocument30W SMD LED SUPER BEAM RECHARGEABLE POCKET LIGHT MODEL NO: LED451 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. Refer to instructions 1. SAFETY 1.1. GENERAL SAFETY 8 DO NOT shine directly into your, another person's or an animal's eyes. 8 DO NOT allow children to use the torch. 8 DO NOT use the torch if you suspect that the battery or the torch casing is damaged. 8 DO NOT leave batteries in a discharged state. Before storage remove batteries and dispose of in the correct manner. WARNING! Please keep out of reach of children, as lens generates heat on Super Beam setting. 1.2. BATTERY SAFETY WARNING! To reduce the risk of burns or fire: 8 DO NOT attempt to open the batteries. 8 DO NOT crush, puncture, short contacts or dispose of in fire or water. 8 DO NOT expose to temperatures above 60°C (140°F). 9 Replace only with the batteries designed for this product. 9 Recycle or dispose of used batteries as stipulated by local regulation. 9 If the electrolyte in the batteries gets on your skin, thoroughly rinse with water. If it gets in your eyes, rinse thoroughly with cool water and seek immediate medical attention. 2. INTRODUCTION 30W SMD LED produces extremely bright, white light with an output of 1400 lumens, with a super beam output of 3500lm for 35 seconds. Working range up to 250m. Powered by a rechargeable 3.7V 2Ah lithium-ion battery with a charging time of 3-4hrs. Supplied with micro USB charging lead. ***WARNING*** Please keep out of reach of children, as lens generates heat on Super Beam setting. 3. SPECIFICATION Model No: Battery: Charging Time: LED Type: Lumen Output: Operating Time: LED451 3.7V 2Ah Li-ion 4-5hr 3 X 10W SMD LED Super Beam; 3500lm for 35 seconds; High;1400lm Super Beam for 35 seconds + High; 1.2hr, Low; 10hr IMPORTANT WARRANTY INFORMATION The batteries fitted to this lamp are considered to be consumable items and their ability to accept a charge will reduce over time. We will provide warranty against mechanical and electrical defect for a period of one year - this DOES NOT cover fair wear and tear. If the batteries are not properly charged before first use, or regularly conditioned, their capacity will diminish. Under these circumstances we will not replace the battery regardless of whether it is less than one year old. 4. OPERATION 4.1. 4.1.1. 4.1.2. 4.1.3. 4.2. 4.2.1. 4.2.2. Note: Remove plastic disc between battery and spring before turning on. LIGHTING SEQUENCE Press the power button (fig.1) once for lowest output, press twice for medium output, three presses for highest output. Press and hold power button for an ultra bright Super Beam mode. Double press the power button for SOS mode. CHARGING THE BATTERY Connect to power source via usb. Power button will glow red when charging and change to blue when fully charged. Power Button © Jack Sealey Limited Original Language Version fig.1 LED451 Issue 5 (H) 08/02/24 5. MAINTENANCE 5.1. Keep the torch clean by wiping with a damp cloth. 5.2. Remove batteries if not being used for a long period of time. 5.3. Store torch and batteries in a dry childproof area. BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705. ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations. WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. IMPORTANT: No Liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk © Jack Sealey Limited Original Language Version LED451 Issue 5 (H) 08/02/24