Logitech C922 Pro HD Stream Webcam

This document provides a complete setup guide for the Logitech C922 Pro HD Stream Webcam.

Know Your Product

A diagram illustrates the Logitech C922 Pro HD Stream Webcam. Key components are labeled: the central autofocus HD 1080p lens, the LED activity light above the lens, the dual microphones on the sides, and the universal mounting clip at the base. A USB-A cable is shown connected to the webcam. A close-up view of the mounting clip reveals a ¼ inch tripod thread on its underside.

What's in the Box

• 1 Webcam with 5 ft (1.5 m) attached USB-A cable
• 2 User documentation

Setting Up the Webcam

For placement on a monitor

1. Place your webcam on a computer, laptop, or monitor at a position or angle you desire.
2. Adjust the webcam to ensure the foot on the universal mounting clip is flush with the back of your device.
3. Manually adjust the webcam up/down to the best position to frame yourself.

For placement on a tripod*

1. Locate the ¼ inch tripod thread on the bottom of the universal mounting clip.
2. Secure the webcam on your tripod by twisting it into the ¼ inch thread.
3. Place your webcam with the tripod anywhere you desire to the best position to frame yourself.

* Tripod not included

Connecting the Webcam via USB-A

A diagram shows a USB-A connector being plugged into a USB-A port on a laptop, illustrating the connection process.

Successful Connection

The LED activity light will light up when the webcam is in use by an application. A front view of the Logitech C922 Pro HD Stream Webcam is shown, with the LED activity light illuminated, indicating a successful connection and active use.

Dimensions

Including Fixed Mounting Clip:

• Height x Width x Depth: 1.73 in (44 mm) x 3.74 in (95 mm) x 2.80 in (71 mm)
• Cable Length: 5 ft (1.5 m)
• Weight: 5.71 oz (162 g)

Support

For more information and support, visit: www.logitech.com/support/C922