PROHEAR EM-033 BT FM/AM Earmuffs User Manual

Key Features

Product Diagram

The earmuffs feature the following components:

Introduction

This section details the operation of the PROHEAR EM-033 earmuffs.

1. POWER BUTTON:
(1) Press and hold for 3 seconds: TURN ON; Press and hold for 5 seconds: TURN OFF.
(2) Quick Press: SWITCH BT/FM/AM modes.
2. TUNING BUTTON:
(1) Press and hold the [tuning up button] or [tuning down button] for 3 seconds: Automatic station search. (2) Quick press: Manual tuning mode.
3. MEMORY BUTTON:
(1) Choose a favorable channel.
(2) Long press the [M button] until the display flashes to add the current channel to your presets. Then, quick press the [channel select up button] or [channel select down button] to select the channel, and press again to save it.
(3) Once multiple channels are saved, quick press the [M button] to switch among them.
4. VOLUME CONTROL KNOB:
Adjust Volume.
5. AUX JACK:
(1) An extra AUX Cable is provided to connect to audio devices.
(2) Power on the earmuffs.
(3) Connect it to an MP3 player or iPod through the AUX cable.
(4) The LCD display will show: AUX.
6. RADIO RECEPTION:
(1) Position the earmuffs as shown in the photo. DO NOT bend the aerial.
7. DIGITAL DISPLAY:
Shows the FM/AM Channel.
8. BATTERY COMPARTMENT:
(1) Non-detachable design.
(2) Includes a rechargeable lithium polymer battery.
(3) Comes with a USB charging cable; connect the Type-C interface to charge.

Wireless Bluetooth Technology

Instructions for using the Bluetooth functionality:

  1. Short press the [search button] to search for BT model '----' after powering on.
  2. Bluetooth Pairing: Open Bluetooth settings on your phone or MP3 player. Ensure Bluetooth is on and select 'EM033' to connect. Once successful, the LCD display will show 'ON'. The device will automatically reconnect to the previously connected device if it has been paired before.
  3. Answer/Cancel Call: Short press the [call button] to pick up or end a call. To mute the call, double-click the [call button]. Repeat this process to unmute.
  4. Reject Call: Press and hold the [reject call button] for 3 seconds.
  5. Recall: Press and hold the [recall button] for 3 seconds. If you wish to cancel the call, press and hold the [reject call button] for 3 seconds.
  6. Music Situation: Short press the [next music button] for the next music track; Short press the [previous music button] for the last music track; Short press the [play/pause button] for music pause.

Product Details

Approvals

The product meets the Basic Safety Requirements of the European Community regulations.

Attenuation Data

The attenuation values and noise levels for the headset are tested and approved according to EN 352-1, EN352-6, EN352-8.

SNR 31dB H=35dB M=28dB L=21dB
Frequency(Hz) 125 250 500 1000 2000 4000 8000
MEAS 18 19.6 29 34.4 34.7 43.1 41.9
STD.DEV. 3.1 1.7 2.7 3.2 2.3 3.6 3.9
MEAN-SD 14.9 17.9 26.2 31.2 32.4 39.6 38.0

Materials

Part Materials Part Materials
Cup ABS Attention foam (inserts) Polyurethane, PVC
Cover ABS Cushions Polyurethane
Headband Acetal Button TPE

Wearing Instructions

Follow these steps for proper fitting:

  1. Pull the earcups apart (as shown in Figure 1).
  2. Place the product on your head, securely covering both ears (as shown in Figure 2).
  3. Adjust the earcup position by extending the headband to ensure a good fit around the head and ears (as shown in Figure 3).

Important Notes and Warnings

This product is subject to Regulation (EU) 2016/425 and classified as Category III.

Use Instructions

Adhering to these recommendations ensures optimal protection. If not followed, protection may be severely impaired.

Storage

When not in use, store earmuffs without stretching the headband or compressing the cushions. Ensure cushions lie flat and without creases. Keep earmuffs dry, clean, and at normal room temperature, away from dust and direct sunlight. If storing for a prolonged period, remove batteries to prevent damage. The shelf life of the product is 5 years.

Hygiene Kit

Cushions and inserts are replaceable. Always replace worn or damaged parts. Remove the cushion by pulling it straight out. Use only hygiene kits from ZH.

Maintenance

Inspect earmuffs regularly. Cushions may deteriorate with use and should be examined frequently for cracking and leakage. Clean and disinfect cups, cushions, and inserts with mild soap and water only. Do not immerse earmuffs in water. To avoid moisture damage to electronic components, remove acoustic foam regularly and allow ear cups to dry. CAUTION: Do not touch the electronics board or cables! Once dry, reinstall the acoustic foam to cover the electronics.

Manufacturer Details

Manufacturers: Hangzhou ZH Tech Co., Ltd.

Address: No.6, ShunLe Road, Yuhang, Hangzhou, P.R. China

EU Declaration of Conformity

EU Declaration of conformity is enclosed.

PDF preview unavailable. Download the PDF instead.

91bIPUkGcZL ?ref=dp product quick view WPS 文字

Related Documents

Preview PROHEAR EM-033 Bluetooth FM AM Earmuffs User Manual
Comprehensive user manual for PROHEAR EM-033 Bluetooth FM AM Earmuffs, detailing features, operation, Bluetooth connectivity, warranty information, and FCC compliance.
Preview Prohear EM030 Electronic Bluetooth Hearing Protector - External Views
Detailed external photographs and descriptions of the Prohear EM030 Electronic Bluetooth Hearing Protector, showcasing its design, branding, and key features from multiple angles.
Preview Prohear EM030 Electronic Bluetooth Hearing Protector User Manual
User manual for the Prohear EM030 Electronic Bluetooth Hearing Protector, detailing features, safety information, fitting instructions, maintenance, and warranty.
Preview PROHEAR 030 Bluetooth Hearing Protection User Manual
User manual for the PROHEAR 030 Bluetooth Hearing Protection. This guide covers features like Bluetooth connectivity, sound amplification, noise reduction, volume control, and MP3 input. It also includes instructions on Bluetooth operation, call handling, and troubleshooting.
Preview PROHEAR EM037 Bluetooth Ear Muffs User Manual
User manual for the PROHEAR EM037 Bluetooth Ear Muffs, detailing key features, basic operation, Bluetooth connectivity, audio input mode, and warranty information.