VIBIA Mayfair Mini LED Table Lamp

Design by Diego Fortunato

Assembly Instructions | Version E01

Important Safety Information

⚠️ Before assembling and installing this product, carefully read the following:

Before first turning on the light fitting, the battery should be fully charged using the supplied charger. Only VIBIA-approved chargers and cables should be used. Unauthorized chargers and cables can cause the battery to explode or cause irreparable damages.
This lamp is for indoor use only, excluding bathrooms or any type of humid surface.
It is recommended to read the manual before installing the lamp. Keep these instructions for future reference.
Do not disassemble, modify, or attempt to repair this fitting. For technical assistance, contact VIBIA. Any change or modification to the light fitting can nullify the manufacturer's guarantee.
All electronic products and batteries must be taken to separate waste collection points at the end of their working lives. They must not be disposed of in normal household waste. It is the user's responsibility to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries, according to local laws.

Product Specifications

Model Number: 5495
Net Weight: 0,73 Kg
Light Source: 1 x LED 2,5W 5V
Ingress Protection: IP20 (Protected against solid objects >12mm, no protection against water)
Certification: CE
Power Input: Bi-volt ~ 50/60 Hz
Electrical Class: Class III (Electrical product with low voltage safety connection)
Current Type: Alternating current

Supplied Materials

1 x Driver
1 x USB-C cable
1 x Lighting fixture

Product Assembly

Follow these steps for assembly:

Step 3.1: Adapters

Diagram shows various electrical plug adapters for different regions.

Step 3.2: Connecting Power

Connect the USB-C cable to the driver. Then, connect the driver to a power adapter (not supplied) and plug it into a wall socket.

Step 3.3: Assembling the Lamp

Attach the lamp head to the base. Connect the USB-C cable to the lamp fixture.

Step 3.4: Charging

Important: ONLY USE THE CABLE SUPPLIED.

Charging: When charging, the indicator shows a lightning bolt symbol ⚡. The process is indicated for approximately 0.2 seconds, and a light may be visible for 1 second.

No Charging: If the lamp is not charging, the indicator shows a crossed-out battery symbol ?❌.

Adjustments & Maintenance

Intensity Regulation

The lamp's intensity can be adjusted by touching the base. The touch control is indicated by a timer icon ⏱️ 2s.

1st Pulse (Autonomy: 24h): Intensity 25%
2nd Pulse (Autonomy: 12h): Intensity 50%
3rd Pulse (Autonomy: 6h): Intensity 100%
4th Pulse: OFF

To adjust intensity, touch and hold the base. The light will cycle through brightness levels. Release to select.

Switch On and Off

Tap the base once to turn the lamp on or off.

Maintenance

Use a slightly-wet cotton cloth for cleaning.

In case of malfunction or damage, please contact the retailer who sold the lamp.

Contact Information

Vibia Lighting, S.L.U.

Spain & Portugal: T. +34 934 796 970

International: T. +34 934 796 971

Email: customer.service@vibia.com

Website: www.vibia.com