Denon DN-200BR Stereo Bluetooth Audio Receiver
Introduction
The Denon DN-200BR is a professional-grade Bluetooth audio receiver designed to add wireless stereo Bluetooth audio reception to any professional audio system. It allows users to send audio signals from their Bluetooth-enabled devices (like smartphones or tablets) to a mixer, loudspeakers, or amplification system via its balanced XLR or unbalanced 1/4" (6.35 mm) outputs. The device features a secure Bluetooth pairing mode.
Box Contents
- DN-200BR unit
- Removable Bluetooth Antenna
- 2-Pin Euroblock Connector
- Power Adapter
- User Guide
- Safety & Warranty Manual
For the latest product information, system requirements, compatibility details, and product registration, visit denonpro.com.
Features
The DN-200BR offers several key features:
- Adds Bluetooth connectivity to any audio system.
- Provides balanced XLR and 1/4" audio outputs.
- Offers a wireless range of up to 33 meters (100 ft).
- Features a discreet and robust build quality suitable for various mounting locations.
Front and Rear Panel Overview
The unit's front panel includes:
- 1. Power Input: Connect the included power adapter here.
- 2. BNC Antenna Terminal: Connect the removable Bluetooth antenna for receiving and transmitting Bluetooth signals.
- 3. Pair Button: Press and hold for 3 seconds to make the device discoverable for pairing.
- 4. Remote Pairing Connector: For connecting an optional remote pairing button.
The top panel features:
- 5. Status Light: Indicates Bluetooth pairing status (slow flash: not paired, quick flash: pairing, solid: paired).
- 6. Level Knob: Adjusts the output volume level.
The rear panel includes:
- 7. Outputs (Balanced XLR): For connecting to loudspeakers, mixers, etc., using XLR cables.
- 8. Outputs (Unbalanced 1/4" / 6.35mm): For connecting to loudspeakers, mixers, etc., using 1/4" cables.
The device dimensions are 5.8" (149mm) wide, 1.8" (45mm) high, and 4.6" (117mm) deep.
Setup
Follow these steps to set up the DN-200BR:
- Connect the DN-200BR's outputs (balanced XLR or unbalanced 1/4") to your audio system's line-level inputs (loudspeakers, mixer, amplifier) using appropriate cables. Ensure the connected device is powered off. For stereo operation, connect Left (L) outputs to Left inputs and Right (R) outputs to Right inputs.
- Connect the included power adapter to the DN-200BR's power input and then to a power source.
- Important: Avoid placing the DN-200BR near a microwave oven, as it may interfere with reception.
- If using a mixer, ensure all its connections are secure and then power it on.
- Power on your loudspeakers last.
Diagram Description (Example Setup): The diagram illustrates a typical connection scenario. The DN-200BR is shown connected via audio cables to a mixer. The mixer is then connected to PA loudspeakers and other loudspeakers. A smartphone or tablet is depicted as the source of the audio signal, wirelessly connected to the DN-200BR via Bluetooth.
Operation
You can play audio from any Bluetooth-enabled device. The DN-200BR uses Bluetooth CSR 4.0 and has a range of up to 82 feet (25 meters). Once paired, your device and the DN-200BR are wirelessly connected, and audio plays through the receiver's outputs.
Pairing a Bluetooth Device
- Ensure the DN-200BR is powered on. The Status Light will flash slowly if not paired.
- On your Bluetooth device, ensure Bluetooth is enabled and the device is within range. The DN-200BR will attempt to pair with the last-connected device automatically.
- If using a different device or pairing for the first time, press and hold the DN-200BR's Pair button for 3 seconds. The Status Light will flash quickly, indicating it's ready for pairing.
- On your Bluetooth device, navigate to its Bluetooth settings menu and select "DN-200BR" to pair.
- Note: Some older Bluetooth devices may require a PIN. Enter "0000" if prompted.
- Once paired, start playing audio from your Bluetooth device.
Adjusting Volume Levels
For optimal sound, adjust volume levels in the following order:
- Your Bluetooth device
- DN-200BR's Level Knob
- Your mixer (if applicable), adjusting input channel levels first, then the main output level.
- Your loudspeakers
Set each volume level as high as possible without causing distortion or clipping.
Important Operation Notes
- The DN-200BR will not receive audio from phone calls. It is recommended to disable your cellular connection while using the device.
- Do not use the DN-200BR near microwave ovens, which can interfere with reception.
- While one Bluetooth device is paired, others cannot connect. To connect a different device, you must first unpair the current one.
Unpairing a Bluetooth Device
To unpair:
- On your Bluetooth device, go to its Bluetooth settings and disconnect from DN-200BR.
- Alternatively, press and hold the DN-200BR's Pair button for 3 seconds and release it.
Troubleshooting
If you encounter issues, first ensure all connections are secure, the device is used as described, and other connected devices are functioning correctly. If problems persist, consult the following:
| Problem | Solution | See Section |
|---|---|---|
| Power does not turn on. | Ensure the power adapter is properly connected to the DN-200BR and a power outlet. | Setup |
| No sound or distorted sound. | Verify all cable and device connections are secure and correct. Check that no cables are damaged. Ensure settings on your Bluetooth device, loudspeaker, and mixer are correct. | Setup |
| Audio from Bluetooth device does not play. | Confirm successful pairing. Improve signal reception by moving the Bluetooth device closer to the DN-200BR and minimizing obstructions (walls, furniture). | Setup and Operation |
| Pairing requires a PIN. | Enter "0000" as the PIN. | Operation |
Technical Specifications
All values are measured with a 1 KHz audio signal with the Level knob at "unity" position. Specifications are subject to change.
General Specifications
| Parameter | Value |
|---|---|
| Frequency Response | 20 Hz – 20 KHz (±1 dBu) |
| Signal-to-Noise Ratio | ≥ 75 dB |
| THD | ≤ 0.01% |
| Analog Output (Balanced XLR) | +4 dBu (±1 dB) |
| Analog Output (Unbalanced 1/4" / 6.35mm) | -2 dBu (±1 dB) |
Bluetooth Specifications
| Parameter | Value |
|---|---|
| Version | CSR 4.0 |
| Maximum Receiver Power | Class 2, 4 dBm |
| Receiver Frequency | 2.4 GHz – 2.480 GHz |
| Receiver Range | Up to 82 ft. / 25 m |
| Receiver Sensitivity | -80 dBm @ 0.1% BER |
| Supported Profiles | AVCTP 1.0, AVRCP 1.0, GAVDP 1.2, AVDTP 1.0, A2DP 1.2, Hands-Free Profile (HFP) 1.5, Headset Profile (HSP) 1.1 |
| Supported Codec | SBC, MP3, AAC, aptX |
General Specifications
| Parameter | Value |
|---|---|
| Operation Temperature | 41–95°F / 5–35°C |
| Power Adapter | 5 V DC, 2 A, center-positive |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Dimensions (width x depth x height) | 5.8" x 4.6" x 1.8" (149 x 117 x 45 mm) |
| Weight | 1.3 lbs. (0.6 kg) |
Important Safety Instructions & Warranty Information
Safety Precautions
- Read and keep all instructions.
- Do not expose the unit to rain or moisture.
- Clean only with a dry cloth.
- Ensure proper ventilation; do not block openings.
- Avoid installation near heat sources.
- Use only the provided power adapter and ensure proper grounding.
- Protect the power cord from damage.
- Refer servicing to qualified personnel.
- Avoid amplifier clipping, which can damage speakers.
- Use caution with headphone outputs to prevent hearing damage.
- In case of unit lock-up due to interference, turn off, wait, and turn back on.
- Dispose of batteries responsibly according to local regulations.
Product Warranty (U.S.A.)
Denon Professional products are warranted against defects in material and workmanship for one (1) year from the date of purchase. Factory-refurbished merchandise has a ninety (90) day warranty. The warranty does not cover damage from improper use, installation, unauthorized modifications, or accidents. For service, contact Denon Pro customer service to obtain a return merchant authorization (RMA) number.
Product Warranty (Outside U.S.A.)
Similar to the U.S. warranty, covering defects in material and workmanship for one (1) year. It excludes damage from accident, misuse, neglect, or unauthorized modifications. Service procedures are similar, requiring contact with Denon Pro for authorization.
Return Information
To return a product for service or repair, obtain a return merchant authorization (RMA) number from your Denon Pro representative via denonpro.com. Include a copy of the original sales receipt. Ship the product in its original packaging with an additional outer layer for protection. COD shipments are not accepted. Freight charges for returns must be prepaid.
Trademarks and Licenses
Denon is a trademark of D&M Holdings Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other company and product names are trademarks of their respective owners.
FCC and Industry Canada Compliance
The device complies with Part 15 of the FCC Rules and Industry Canada's licence-exempt RSSs. It is designed to provide reasonable protection against harmful interference. Specific RF exposure guidelines and warnings are provided, including maintaining a minimum distance of 20 cm from the body.
Contact Information
For further information, visit denonpro.com.
World Headquarters: inMusic Brands, Inc., 200 Scenic View Drive, Cumberland, RI 02864 USA
U.K. Office: inMusic Europe, Ltd., Unit 3, Nexus Park, Lysons Avenue, Ash Vale, HAMPSHIRE GU12 5QE UNITED KINGDOM
Germany Office: inMusic GmbH, Harkortstr. 12 - 32, 40880 Ratingen, GERMANY
