Plugable UD-3900 SuperSpeed USB 3.0 Dual Monitor Docking Station

This guide provides quick installation instructions for the Plugable UD-3900 SuperSpeed USB 3.0 Dual Monitor Docking Station.

For detailed information on Drivers, FAQ, and Support, please visit: plugable.com/products/ud-3900

Recyclable Material. © 2015 Plugable Technologies | August 3, 2015

Connections

The Plugable UD-3900 docking station allows you to connect multiple peripherals and monitors to your computer via a single USB 3.0 cable.

Front Connections

The front panel of the docking station features:

• Headphone jack ?
• Microphone jack ?

Diagram Description: The front connections diagram shows the docking station with headphone and microphone jacks labeled.

Back Connections

The rear panel of the docking station provides the following ports:

• USB 3.0 ports (for high-speed data transfer, e.g., external hard drives ?)
• USB 2.0 ports (for standard peripherals like cameras ?, mice ?️, printers ?️, keyboards ⌨️)
• Ethernet port ? (for wired network connection)
• HDMI monitor output ?️
• DVI/VGA monitor output ?️
• Power connector for the included power supply ?

A laptop or tablet ? connects to the docking station via a USB cable (not explicitly shown in the rear diagram but implied by the overall setup) and receives power from the included power adapter ?.

Diagram Description: The back connections diagram illustrates the rear of the docking station, showing ports for USB 3.0 devices, USB 2.0 devices, Ethernet, HDMI monitor, DVI/VGA monitor, and the power supply. A laptop/tablet is depicted connected to the docking station.

USB 3.0 Device Connections: Icons represent external hard drives and general USB 3.0 devices, with text indicating 'SuperSpeed (5Gbps) to transfer files'.

USB 2.0 Device Connections: Icons represent cameras, mice, printers, and keyboards.

Driver Installation

NOTE: Monitors may blink during driver installation, and your system may need to be rebooted.

For Windows® 10 / Windows 8.1 / Windows 7:

1. Step 1: Do not connect the network cable to the docking station until drivers are installed.
2. Step 2: Ensure your PC or tablet has an open internet connection.
3. Step 3: Connect the docking station to your PC or tablet using the provided USB cable.
4. Step 4: Windows Update will automatically install the most recent drivers.

For Windows Vista® / Windows XP:

1. Step 1: If you did not receive drivers from Plugable via email shortly after purchase, download the most recent drivers from: plugable.com/products/ud-3900
2. Step 2: Install the drivers and then connect the UD-3900.

Changing Display Mode

Configure how your external monitors are displayed relative to your primary screen.

For Windows 10 / Windows 8.1 / Windows 7:

1. Step 1: Use the shortcut key combination: Windows Key + P.
2. Step 2: Select your preferred display mode from the options presented (e.g., Computer only, Duplicate, Extend, Projector only).

Diagram Description: The diagram shows the four display mode options: 'Computer only', 'Duplicate', 'Extend', and 'Projector only' (or 'Second screen only').

For Windows Vista / Windows XP:

1. Step 1: Click the DisplayLink Manager icon in the system tray.
2. Step 2: Scroll to 'Extend' on the menu.
3. Step 3: Select your preferred display mode.

Support and Resources

For drivers, FAQs, and further support, please visit:

plugable.com/products/ud-3900

If you have questions, please email:

English: support@plugable.com ?

Japanese: nihongo@plugable.com ?