BEAUTURAL Fabric Shaver

Introduction

Thank you for purchasing the BEAUTURAL Fabric Shaver. This instruction manual contains important information about safety, usage, and disposal. Use the product as described and keep this manual for future reference. If you sell this fabric shaver or pass it on, also give this manual to the new owner.

Safety Instructions

• This product is only authorized for domestic use and not for commercial or industrial purposes. It is only intended for applications described in these instructions.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Do not expose or submerge the shaver in water ?. Do not use the fabric shaver on moist fabrics.
• Make sure no foreign objects penetrate the shaver.
• Do not attempt to open the shaver's housing, except the battery compartment to replace batteries and shaver foil to clean cutting blades.
• Do not oil or grease the cutting blades! This will smear your clothes.
• Remove the batteries if you do not intend to use the shaver for a long period of time.
• If the batteries leak, remove them immediately and clean the battery compartment with a dry cloth.
• Use ONLY the type of battery as indicated in the "Specifications" section of this manual.
• Do not throw the batteries into fire ?. Do not recharge the batteries to avoid explosion.
• Always keep batteries out of the reach of infants and young children to prevent them from being swallowed. If swallowed, take immediate action and contact medical authorities for help.

Product Description

The fabric shaver consists of the following parts:

• 1. 0/I/II/Speed Switch
• 2. Battery Compartment Cover
• 3. Fluff Collector
• 4. Cutting Blades
• 5. Shaver Foil
• 6. Adjustable Spacer
• 7. Replaceable Cutting Blades
• 8. Cleaning Brush
• 9. Carrying Bag

[Diagram showing the fabric shaver and its components with numbered labels]

Included Items

• 1x Fabric Shaver
• 2 x Replaceable Cutting Blades
• 1x Cleaning Brush
• 1 x Carrying Bag
• 1 x Instructional Manual

Before using the fabric shaver for the first time, check the package contents to ensure all parts are free of visible damage.

Inserting Batteries

1. Press the tabs on the battery compartment cover and push down.
2. Insert 2 AA batteries (not included), paying attention to the polarity ?.
3. Put the battery compartment cover back on and the shaver will be ready for use.

Note: When inserting the batteries, make sure the ribbon inside of the compartment is underneath the batteries for better removal of batteries.

Preparing for Use

The fabric shaver can damage delicate fabrics and very soft materials such as angora. Before removing fluff, always test on a small area of the fabric that is not publicly visible to confirm the speed level is appropriate for the fabric.

Turn the transparent adjustable spacer to the level "Thick" and then push the 0/I/II/Speed Switch to Speed Level I. To test the most suitable speed for your fabrics and avoid damaging the garment, it is recommended to use Speed Level I first, then switch up to Speed Level II.

How to Use Beautural Fabric Shaver?

1. Lay the garment over a hard surface such as a table top. This ensures the fabric will not gather and accidentally be damaged during shaving.
2. Turn the spacer to the desired level or remove it completely.
3. Press the 0/I/II/Speed Switch to speed level I, press it again to speed level II.
4. Stretch a small area of fabric with one hand during shaving and keep the shaving head at a 90 degree angle to the fabric.
5. To turn off the shaver, press the 0/I/II/Speed Switch the third time back to Speed Level 0.

Note: Empty the fluff collector regularly. The fluff collector should never be more than 3/4 full. An overfilled fluff collector will slow the cutting blades no matter the amount of battery power left.

Shaving Tips

• For Knitted Fabrics: Guide the shaver in the direction of the knitting. [Diagram showing knitting direction]
• Fabrics with Accessories: Avoid shaving over any accessories. [Diagram showing garment with accessories]
• Thin Garments: Fold into two layers and lay over an ironing board. [Diagram showing folded garment on ironing board]
• Quick Shaving: Slide the shaver around over the top of the garment. [Diagram showing shaver moving over garment]

When Should I Use the Shaver with Spacer?

• "Thick" is for large bobbles and coarse textiles; 5mm length distance from the cutting blades. [Diagram showing "Thick" spacer setting]
• "Thin" is for small lint/bobbles and fine textiles; 3mm length distance from the cutting blades. [Diagram showing "Thin" spacer setting]

When Should I Remove the Spacer from the Shaver?

• Removing the spacer is only for very fine lint; virtually no spacing to the cutting blades. [Diagram showing spacer removed]

How to Remove/Attach the Spacer?

To Remove the Spacer: Hold the shaver with one hand, put your thumb on the top of the spacer, pull the spacer forward, and remove it. [Diagram showing spacer removal]

To Attach the Spacer: Place it on the cutting head and press it firmly. Make sure the tab on the bottom of the spacer fits into the recess on the shaver. [Diagram showing spacer attachment]

How to Replace the Cutting Blades

To Remove the Cutting Blades: Unscrew the shaver foil, carefully grasp the cutting blades' edge and pull them out, avoiding damage to your hands. [Diagram showing blade removal]

To Attach the Cutting Blades: Grasp the cutting blades' edge and firmly insert the cutting blades into the shaver body. Finally, screw the shaver foil back into place. [Diagram showing blade attachment]

Emptying the Fluff Collector

1. Pull the fluff collector a little way down and lift it off.
2. Empty the textile fluff.
3. Place the fluff collector back on the shaver.

Maintenance and Care

1. Unscrew the shaver foil and spacer and clean them using a slightly damp cloth.
2. Use the officially-provided cleaning brush ⚙️ to remove fluff and lint remnants from the cutting blades.
3. Screw the shaver foil back on when all parts are completely dry.
4. Place the spacer back on the shaver.

Notes:

• Never use any corrosive liquids. These may damage the surface of the shaver.
• Be careful when handling the cutting blades. They are very sharp and can easily be damaged.

Specifications

Power Supply: 2 x 1.5V type AA batteries ?

Voltage: 3V

Disposal

Disposal of the appliance

Under no circumstances should you dispose of the appliance in normal domestic waste. This product is subject to the provisions of European Directive 2012/19/EU.

Dispose of the appliance via an approved disposal company or your municipal waste facility. Please observe currently applicable regulations. Please contact your waste disposal center if you need any further information.

Disposal of batteries

Used batteries may not be disposed of in household waste. All consumers are statutorily required to dispose of batteries at a collection point provided by their local municipality or retail store. The purpose of this obligation is to ensure batteries are disposed of in a non-polluting manner. Only dispose of batteries when they are fully discharged.

This product's packaging is made from environmentally friendly material and can be disposed of at your local recycling plant. ♻️

Customer Service

BRAND OWNER: 1byone Products Inc.

1230 E Belmont Street, Ontario, CA, USA 91761

Customer Service: +1 909-391-3888

Website: www.1byonebros.com

EUROPEAN REPRESENTATIVE (IMPORTER): APEX CE SPECIALISTS LIMITED

Unit 3d North Point House, North Point Business Park, New Mallow Road, Cork, T23 AT2P, Ireland

BRITISH REPRESENTATIVE (IMPORTER): APEX CE SPECIALISTS LIMITED

89 Princess Street, Manchester, M1 4HT, UK

Contact Information by Region: