Sporton Lab Test Photos
Appendix G: Test Configuration Photographs
1. Photographs of Conducted Emissions Test Configuration
Test mode: Mode 1
FRONT VIEW
A white wireless gateway device (ARRIS NVG678XY) is placed on a yellow test table within an anechoic chamber. Cables are connected to the device and routed to test equipment. The chamber walls are lined with RF absorbing material.
REAR VIEW
The rear of the white wireless gateway is visible. It is connected via cables to other test equipment and power sources. The overall test setup in the anechoic chamber is shown.
2. Photographs of Radiated Emissions Test Configuration
Test Configuration: 30MHz~1GHz
Test mode: Mode 2
FRONT VIEW
A large, white, rectangular object, possibly a shielded enclosure or the device under test, is placed on a turntable in an anechoic chamber. The object is covered with a white material. The chamber walls are lined with RF absorbing material.
REAR VIEW
The rear of the large, white test object is shown. It is situated on the turntable within the anechoic chamber.
3. Photographs of Radiated Emissions Test Configuration
Test Configuration: Above 1GHz
FRONT VIEW
A large, white, multi-tiered object, likely the device under test, is positioned on a turntable. RF absorbing foam cones are visible in the foreground and around the object. The test is conducted in an anechoic chamber.
REAR VIEW
The rear perspective of the large, white test object is displayed. It is mounted on a turntable in the anechoic chamber, with RF absorbing materials present.
