Area Control

Watch this video to find out about configuring ChilliNet areas.

https://youtu.be/vH8pOu9ChS0

ChilliNet Mode Area Assignment

This option is only available when the dimmer is in ChilliNet mode.

This option allows you to assign each of the dimmer channels to an Area (1 - 10).

Select the Area Control option from the top level menu options, and press the ENT key to enter the Area Control menu.

Available Options:

• Set Chan Area
• Set All Chans

Set Channel Area

This option allows you to assign an area to each of the dimmer channels individually.

Select the Set Chan Area option from the menu, and press the ENT key. The screen shows:

Channel: 1
Area: 1

The cursor is in the Channel field. Press the ENT key to move between the Channel and Area fields, and adjust the values using the cursor keys and numeric keypad. Repeat operation for each channel.

Set All Channels

This option allows you to assign an area to all the channels on the dimmer in a single operation.

Select the Set All Chans option from the menu, and press the ENT key. The screen shows:

All Channels
Area: 1

Use the numeric keypad or cursor keys to enter the required area number (1-10) and then press the ENT key.