About These Gloves
Alpinestars auto gloves are engineered to provide optimal levels of protection, performance, and comfort for motorsport activities. This product is FIA 8856-2018 homologated and certified to EN ISO 14460:1999+A1:2002 standards, classifying it as Category 3 Personal Protective Equipment (PPE) under Regulation (EU) 2016/425.
This guide is essential for selecting the correct glove model and size, and for maintaining your gloves throughout their lifespan. Please read this information carefully to ensure proper care and usage.
Safety and Usage Warnings
WARNING: Complete protection against all potential hazards in motorsport can never be guaranteed. Users must be aware of the risks involved and use appropriate protective gear.
Ensure gloves fit correctly for certified protection. The neck, wrists, and ankles are particularly vulnerable areas and must be covered by at least two layers of protective clothing.
Glove Selection and Sizing
Refer to the detailed size chart provided within the document to find the correct fit. The chart includes measurements in both centimeters and inches for men, women, and youth.
Care and Maintenance
Store and transport gloves in the provided carry bag, ensuring they are completely dry before storage. Avoid using strong or abrasive solvents for cleaning, as they can compromise the material's strength or color.
Regularly inspect gloves for wear, holes, or tears. For repairs, use the same thread and material as the original. Alpinestars recommends professional inspection and repair services.
Lifespan and Disposal
Alpinestars products are designed for durability, but all materials degrade over time. Follow the FIA regulation of a maximum 10-year lifespan from the date of manufacture. Replace gloves at the end of their maximum lifespan or if any damage is detected.
Dispose of used gloves according to local/national refuse regulations.
Important Notes on Customization
Any embroidery or customization must comply with FIA regulations. Only Alpinestars can apply printing or transfers. Ensure any customization is done with flameproof materials and threads. Failure to comply may invalidate the glove's homologation, leading to penalties or disqualification.
Markings and Certifications
The gloves feature FIA marking on the cuff and CE-UKCA markings indicating compliance with relevant safety standards and regulations. Refer to the document for detailed explanations of these markings.
Disclaimer
Alpinestars disclaims all responsibility for injuries sustained while using its products. Motorsport is an inherently dangerous activity, and users assume all associated risks.
